-
$270.00 Off
$2,697.99 List Price:
$2,967.99🏭Made in USA 🔒1-year warranty ⚙No hydraulics required 📘 Overview The Haugen telehandler to skid steer adapter (Tele-Tach) is a skid steer adapter plate that fits your telehandler's carriage and presents a Universal Skid Steer Quick Attach face, so ground-engaging skid steer attachments will... -
$95.00 Off
$949.99 List Price:
$1,044.99📐Fits existing fork tines 🔗Converts between standards 📘 Overview The Haugen forklift trailer mover (MFBA) is a fork mounted trailer spotter with a 2" standard receiver hitch that slides onto your pallet fork tines. Move trailers around a yard or loading dock with the... -
$8.00 Off
$70.99 List Price:
$78.99🔎OEM interchange 🏭Aftermarket 📘 Overview Komatsu wheel loader mirror replacement — this Komatsu wheel loader mirror carries the OEM 421-54-65720 fit and mounting pattern. It covers 5 published Komatsu models, listed in full further down this page. The head mounts to the arm and... -
$215.00 Off
$2,153.99 List Price:
$2,368.99🏭Made in USA since 1981 🔒5-year factory guarantee 🔨Two section tubular steel boom 📘 Overview A Star Industries forklift jib boom extends the reach of a forklift so loads can be placed over or under obstacles a carriage cannot get past. Four models cover... -
$199.00 Off
$3,999.99 List Price:
$4,198.99⚙No hydraulics required 📐Fits existing fork tines 📏Multiple sizes available 📘 Overview The Haugen trash hopper for forklift and telehandler fleets (MTH) is a fork-slot debris container for telehandlers and industrial forklifts. It slips over the pallet fork tines already on your machine —... -
$372.00 Off
$3,715.99 List Price:
$4,087.99🏭Made in USA since 1981 🔒5-year factory guarantee 🔨3/16 in plate steel sides 📘 Overview A Star Industries forklift trash hopper is placed where the work is and filled as the job progresses. The open face design is the point: crews wheel barrows and... -
$80.00 Off
$799.99 List Price:
$879.99🏆Engineer certified 📏Multiple sizes available 📘 Overview Haugen forklift fork extensions (MFE) add reach to the tines already on your machine — the simplest way to handle loads longer than your standard tines will safely carry. Full tube extensions that pin onto the host... -
$265.00 Off
$2,651.99 List Price:
$2,916.99🏭Made in USA since 1981 🔒5-year factory guarantee 🔨10-gauge steel, 1/4 in angle reinforced 📘 Overview A Star Industries crane lift box raises and lowers supplies, materials and small equipment to a working level, with four-point lift eyes so the load hangs square rather... -
$121.00 Off
$1,202.99 List Price:
$1,323.99🏭Made in USA since 1981 🔒1-year warranty 🔨Forged from one piece of carbon steel 📘 Overview Star Industries over the bucket forks add forklift capability to a loader or backhoe without removing the bucket. The tines hang over the bucket lip on a shaft... -
$294.00 Off
$2,939.99 List Price:
$3,233.99🏭Made in USA since 1981 🔒5-year factory guarantee 🚧Meets OSHA and ANSI requirements 📘 Overview A Star Industries forklift spreader bar handles long material — beams, trusses, rebar cages and roofing sheets — from a forklift or telehandler rather than a crane. It is... -
$330.00 Off
$3,298.99 List Price:
$3,628.99🏭Made in USA 🔒1-year warranty 🏆Engineer certified 📘 Overview The Haugen adjustable forklift boom attachment (MIJ) is a fork-mounted forklift jib boom that slips onto your tines and extends from 4 to 12 feet across eight locked positions. Two duty classes: the standard MIJ... -
$329.00 Off
$5,686.99 List Price:
$6,015.99🏭Made in USA since 1981 🔒1-year warranty ⚙Self-levelling pickup trolley 📘 Overview Star Industries crane forks turn a crane into a forklift for the length of one lift. The 660 king post frame needs no cables or pulleys — a self-shifting spring-loaded pickup trolley... -
$156.00 Off
$1,551.99 List Price:
$1,707.99🏆Engineer certified 📋Meets ANSI/OSHA 📐Fits existing fork tines 📘 Overview The Haugen forklift trailer spotter that also lifts (MFSH-TS) is a fork-mounted unit combining a swivel hook with a 2" receiver hitch in one fork-pocket frame. Move trailers around a yard or dock with... -
$18.00 Off
$581.99 List Price:
$599.99🏭Made in USA 🚛Supports forklifts to 5,000 lb 📏Matches container deck height 📘 Overview Container Ramps let a forklift drive straight into a shipping container instead of unloading it by hand at the door, which is the difference between a twenty-minute job and an... -
$155.00 Off
$1,551.99 List Price:
$1,706.99🏭Made in USA since 1981 🔒5-year factory guarantee 🚧OSHA-conscious lift and tow design 📘 Overview The Star Industries Lift-N-Tow is a forklift tow hitch that slips over the forks and lets one machine lift, load and tow without improvising a chain off the carriage.... -
$263.00 Off
$2,634.99 List Price:
$2,897.99🏭Made in USA since 1981 🔒5-year factory guarantee 🚧Meets/exceeds ANSI standards 📘 Overview The Star Industries telehandler work platform turns a rough-terrain or extendable-reach forklift into an aerial work platform, reaching over obstructions and into places a scissor lift cannot go. Four platform sizes... -
$52.00 Off
$520.99 List Price:
$572.99🏭Made in USA since 1981 🔒1-year warranty on replacement forks 🔨Machined to carriage size 📘 Overview A fork carriage shaft is the bar that shaft-mounted forks hang from on a telehandler or rough-terrain forklift, and this is the Star Industries replacement. Shafts wear, bend... -
$310.00 Off
$3,098.99 List Price:
$3,408.99🏆Engineer certified 📋Meets ANSI/OSHA 📐Fits existing fork tines 📘 Overview The Haugen forklift man basket (MWP) is a fork-mounted telehandler work platform for telehandlers, rough terrain forklifts and mast-style lift trucks, rated at 1,000 lbs for people and tools together. Four sizes from 4x4... -
$355.00 Off
$3,548.99 List Price:
$3,903.99🏆Engineer certified 📋Meets ANSI/OSHA 📐Fits existing fork tines 📘 Overview The Haugen galvanized work platform (MWPG) is the same fork-mounted telehandler work platform as the standard MWP, hot-dip galvanized after fabrication so it does not rust. Four sizes from 4x4 to 4x9'8", all rated... -
$3.00 Off
$22.99 List Price:
$25.99🔎OEM interchange 🏭Aftermarket 📘 Overview Komatsu wheel loader mirror replacement — this Komatsu wheel loader mirror carries the OEM 419-56-11260 fit and mounting pattern. It covers 16 published Komatsu models, listed in full further down this page. The head mounts to the arm and...
SHOP TELEHANDLER BY TYPE
CHOOSING THE RIGHT TELEHANDLER ATTACHMENT
Define Your Primary Purpose
Start by identifying the task. For lifting, use buckets or bale handlers. For overhead jobs, go with truss jibs or spreader bars. For precision, choose swivel hooks or platforms.
Match to Your Telehandler's Specs
Make sure your attachment fits your telehandler's lift limits and coupler type. Some accessories, like work platforms or long jibs, need specific ratings to stay safe.
Prioritize Build Quality and Materials
Choose attachments made with reinforced steel and clean welds. Stick with trusted names like Haugen Attachments, Star Industries, and Top Dog.
Think About Long-Term Versatility
Look for attachments that serve more than one purpose. A swivel hook, for example, can move beams today and lift machinery tomorrow.
WHY BUY TELEHANDLER FROM SKIDSTEER
Built on Industry Knowledge
With years in the field, our team speaks your language. We help you pick the right telehandler equipment, not just based on specs, but on what actually works on the job.
Performance Proven Parts
Every item in our catalog has passed real-world stress tests. From telehandler buckets to precision attachments, we offer only gear we’d trust on our own worksite.
Honest Pricing, No Games
You get the full picture up front. No surprise fees or complex bundles. Our pricing reflects the value of well-built telehandler accessories, backed by support, not guesswork.
Fast, Reliable Delivery
Your job site has no time for delays. We ship telehandler attachments quickly and keep you updated every step of the way across the U.S. and Canada.
Support That Actually Helps
Our experts don’t read from a script. Whether you're unsure about fit, application, or upgrades, we guide you with clear, practical answers.
NEED HELP CHOOSING THE RIGHT TELEHANDLER ATTACHMENT?
Not sure which attachment fits your machine or job site needs? Our experts are here to guide you, no guesswork, just solid advice based on years of hands-on experience.
Contact Us →
FAQs
Are telehandler attachments universal?
Not all telehandler attachments are universal. Compatibility depends on your machine’s coupler system, weight limits, and hydraulic setup.
Can all telehandlers use the same attachments?
Some attachments are brand-specific, while others fit multiple models. Always check size, mounting plate style, and lifting capacity before purchase.
How do I know if a telehandler attachment will fit my machine?
Review your telehandler model’s specifications and match them to the attachment’s coupler type, dimensions, and load rating.
How do I maintain my telehandler attachments?
Inspect for worn pins, cracked welds, or rust. Lubricate joints regularly and store attachments in dry conditions to extend their lifespan.
How long do telehandler attachments usually last?
With proper care and use, most high-quality telehandler attachments last for several years—even under demanding job site conditions.
CUSTOMER SUPPORT
If you need support, we’re here to help.
Mon-Fri: 8am-4:30pm CT
Sat-Sun: Closed
You can also email us for customer service or product support.
support@eskidsteer.com
Call or Text
To place a new order or for assistance with an existing order call or text us at
+1 (866) 757-8337
Live Chat
Have questions or need help?
Chat with us using the icon in the bottom left.
Start new chat
- Choosing a selection results in a full page refresh.