-
$9.00 Off
$396.99 List Price:
$405.99Made in USA 12-mo warranty Overview These are Digga’s auger extension outer bars, fitting between the drive and the auger bit to add drilling depth without buying a longer auger. Two hub sizes are covered: 2" hex in 2, 3, 4, 6 and 8... -
$1.00 Off
$32.99 List Price:
$33.99Made in USA Direct fit Overview Of the auger teeth on a Digga A4 cutting head, the TS-3 outer tooth is the one that wears fastest. The outer position travels the largest circumference per revolution, so it covers more ground and more material than... -
$3.00 Off
$137.99 List Price:
$140.99Made in USA Direct fit Overview This tungsten auger pilot is the PM-SQ-3 from Digga’s A4 Heavy Conditions set — the same square drive as the steel PM-SQ-1, with tungsten on the cutting point. It is the pilot supplied on Heavy Conditions A4 bits... -
$18.99
Made in USA Direct fit Overview These tungsten auger teeth are the TS-C-3, the multi-faced inner tooth for Digga A4 bits — the same pocket and the same profile as the steel TS-C-1, with tungsten brazed onto the cutting face. That brazing is the... -
$18.00 Off
$852.99 List Price:
$870.99Made in USA Teeth & pilot included Overview The Digga RC4 is a taper-tooth skid steer auger bit for combination drilling — earth through to medium rock — on a 2" hex hub. Where the A4 general-purpose bit uses flat bladed teeth and stops... -
$8.00 Off
$362.99 List Price:
$370.99Made in USA 12-mo warranty Overview An auger adapter lets you run a bit whose hub does not match your drive’s output shaft — a 2.5" hex bit on a 2" hex drive, a 3" hex bit on a 2.5" drive, or a 3"... -
$1.00 Off
$41.99 List Price:
$42.99Made in USA Direct fit Overview This square-drive auger pilot is the PM-SQ-1 for Digga A4 earth auger bits — the point at the centre of the head that enters the ground first and holds the auger where you set it. Digga moved this... -
$21.00 Off
$1,029.99 List Price:
$1,050.99Made in USA Teeth & pilot included Overview This rock auger bit is the Digga RC6, a taper-tooth combination auger on a 2.5" hex hub for high-flow drives. It shares its head design with the RC4 but is built on the heavier 5-foot body... -
$58.00 Off
$2,802.99 List Price:
$2,860.99Made in USA 5-yr warranty Overview This skid steer auger attachment is built around the Digga 3DSS drive and covers the same five machine classes as the 2DSS package, suiting machines with more hydraulic flow to give. The 3DSS is worth choosing over the... -
$25.00 Off
$1,205.99 List Price:
$1,230.99Made in USA Teeth & pilot included Overview The Digga DR6 is a dedicated rock auger bit — not a combination bit that copes with rock, but a head built for it. It uses rotating carbide bullet teeth rather than fixed taper teeth, which... -
$15.99
Made in USA Direct fit Overview These auger teeth are the DP-00C3SR rotating carbide bullet picks used on Digga DR6 dedicated rock augers, and they work on a different principle from every other tooth in the range. Fixed teeth wear on one face until... -
$10.00 Off
$485.99 List Price:
$495.99Made in USA TRU-CUT Overview The Digga A4 skid steer auger bit is a general-purpose auger built for earth, clay and shale, available in twelve diameters from 6" to 36" on a 48" overall length with a 2" hex hub. Two tooth configurations decide... -
$3.00 Off
$117.99 List Price:
$120.99Made in USA 12-mo warranty Overview This auger drive mount linkage is the pivoting connection between your mounting frame and the drive unit, and it is what lets the auger hang and find plumb instead of being held rigid by the machine. Digga sizes... -
$27.00 Off
$1,313.99 List Price:
$1,340.99Made in USA 12-mo warranty Overview This skid steer pallet fork is rated to 4,000 lbs on 48" tynes, and it is one of the few attachments on a site that earns its place without ever being the reason you brought the machine. Pallets... -
$1.00 Off
$27.99 List Price:
$28.99Made in USA Direct fit Overview The TTD-3 is the double-tungsten outer auger teeth position on Digga RC4 combination bits, and the “double” is the point: two tungsten faces rather than one, fitted to the outer positions where an RC4 does its widest and... -
$1.00 Off
$5.99 List Price:
$6.99Made in USA Direct fit Overview Digga TS-1 auger teeth are the outer replacement teeth for A4 earth auger bits — the bladed steel tooth that sits in the outer pockets of the cutting head and does the widest cutting work, wearing fastest as... -
$16.00 Off
$739.99 List Price:
$755.99Made in USA 12-mo warranty Overview This excavator auger mount is a two-pin bracket that pins your Digga auger drive directly to the dipper, and the only measurement that matters is your pin diameter. Digga offers four sizes covering 45mm through 100mm, plus a... -
$1.00 Off
$19.99 List Price:
$20.99Made in USA Direct fit Overview The TTS-3 is the single-tungsten inner auger teeth position on Digga RC4 combination bits. Where the outer TTD-3 carries two tungsten faces for wear, the inner tooth carries one — because the inner position is asked for breakout... -
$3.00 Off
$147.99 List Price:
$150.99Made in USA Direct fit Overview This hex-drive auger pilot is the PM-HX-3 for Digga RC4 combination bits, and it is worth noting that it is a hex rather than the square drive used on the A4 range — the two are not interchangeable... -
$16.99
Made in USA Direct fit Overview This auger pilot tooth is the DP-C1HDLR, at the centre of a Digga DR6 rock auger head. On a dedicated rock auger the pilot takes a harder job than on any earth bit: it meets undisturbed rock at...
SHOP DIGGA ATTACHEMENTS BY TYPE
HOW TO CHOOSE THE RIGHT DIGGA ATTACHMENTS
Match the Drive Unit to Your Machine
Digga auger drives come in different torque classes. If you're running a skid steer, a mid-range digga auger drive like the PDX2 might be perfect. Excavators often need more torque.
Consider the Ground Conditions
Not all dirt is equal. Loose soil? Standard bits will do. Clay or rock? You’ll want digga auger bits with bolt-on teeth for better bite and longer life on hard ground.
Look for Smart Features
Want faster, straighter holes? The digga halo system uses LED indicators to guide you as you drill. It's all about keeping your flight path true and consistent.
Don’t Forget Mounts & Hoses
We offer full kits with everything included hoses, mounts, even cradles. Tell us your hydraulic specs and we’ll match your setup with the right digga attachments.
WHY BUY DIGGA ATTACHMENTS FROM ESKIDSTEER.COM
Official Digga Partner
We’re a trusted source for authentic digga attachments, straight from the manufacturer. Every item is backed by full factory support and covered under warranty.
Expert Advice, No Guesswork
Our team knows these tools inside and out. Whether you're choosing a digga trencher or auger, we can walk you through torque specs, machine fit, and ground condition needs.
Complete Kits, Ready to Work
You won’t be chasing parts. Each setup includes the drive, hoses, mounts, and bits. Just bolt it on and get to work with a full digga augers system, pre-matched to your machine.
Transparent Pricing & Financing
What you see is what you pay. We also offer flexible financing so you can get the gear you need now without draining your budget.
Fast, Tracked Shipping
Your job can’t wait, and neither do we. Orders ship quickly with full tracking, so you always know where your digga attachments are and when they’ll arrive.
NEED HELP CHOOSING THE RIGHT DIGGA ATTACHMENT?
From torque specs to soil type, we’ve got you covered. Whether you're drilling, trenching, or mounting a drive head, our team can help you pick the right setup for your machine.
Contact Us →
FAQs
What size auger drive do I need for my skid steer?
It depends on your hydraulic flow and job type. For general dirt drilling, most standard-flow machines pair well with Digga’s PD series.
Are Digga augers compatible with other brands like Bobcat or CAT?
Yes. Digga attachments include universal mounts and hose options. We’ll help match the drive and bit setup to your machine’s specs.
How do I maintain a Digga auger drive?
Keep it greased, inspect bits, and store it dry. Digga auger drives are low-maintenance, but a quick check now and then saves downtime later.
What kind of teeth do I need for rocky ground?
Use bolt-on rock teeth or pilot points with wear protection. Let us know your soil type and we’ll guide you to the right digga auger bits.
Are Digga attachments covered by warranty?
Yes. All digga attachments we sell come with manufacturer-backed warranties. Coverage varies by model—ask us for details.`
CUSTOMER SUPPORT
If you need support, we’re here to help.
Mon-Fri: 8am-4:30pm CT
Sat-Sun: Closed
You can also email us for customer service or product support.
support@eskidsteer.com
Call or Text
To place a new order or for assistance with an existing order call or text us at
+1 (866) 757-8337
Live Chat
Have questions or need help?
Chat with us using the icon in the bottom left.
Start new chat
- Choosing a selection results in a full page refresh.