-
$4.00 Off
$31.99 List Price:
$35.99Pengo by Paladin Fits Aggressor augers 40° or 50° attack angle Overview These Pengo carbide auger teeth — the Carbide Auger Tooth 40/50, part number 134519 — are a bolt-on replacement tooth for Pengo Aggressor augers, weighing 0.65 lb and rated by Pengo for... -
$44.00 Off
$438.99 List Price:
$482.99Pengo by Paladin Double flight, 5/16" thick 2" hex or 2 9/16" round Overview This Pengo skid steer auger bit — the Aggressor Earth Auger — is the professional-grade auger in the Pengo range, built for daily and constant use. Twenty-six configurations cover 6"... -
$27.00 Off
$269.99 List Price:
$296.99Pengo by Paladin Soil rating 5–6 Severe Rock Ripper pilot Overview This Pengo rock bit auger pilot — the RRP 1.75 SQ, stocked as PG-137208 — is the centre pilot on the Pengo Severe Rock Ripper auger. At 15 lb it is by far... -
$5.00 Off
$45.99 List Price:
$50.99Pengo by Paladin Three drill points Fits Aggressor & TriMax Overview This Pengo auger pilot bit — the Triflow Auger Bit Pilot Tooth (TF-350, part number 135088) — is the pilot that leads a Pengo auger into the ground. It weighs 5 lb and... -
$1.00 Off
$9.99 List Price:
$10.99Pengo by Paladin Fits Aggressor augers 40° or 50° attack angle Overview These Pengo auger teeth — the Auger Tooth 40/50, part number 134501 — are a bolt-on replacement tooth for Pengo Aggressor augers, weighing 0.5 lb and rated by Pengo for soil conditions... -
$2.00 Off
$17.99 List Price:
$19.99Pengo by Paladin Fits Aggressor augers 40° or 50° attack angle Overview These Pengo auger teeth for hard ground — the Hardface Auger Tooth 40/50, part number 134802 — are a bolt-on replacement tooth for Pengo Aggressor augers, weighing 0.5 lb and rated by... -
$14.00 Off
$132.99 List Price:
$146.99Pengo by Paladin Three drill points Fits Aggressor & TriMax Overview This Pengo carbide tipped auger pilot bit — the Carbide Tipped Triflow Auger Bit Pilot Tooth (TF-350C, part number 135090) — is the pilot that leads a Pengo auger into the ground. It... -
$39.00 Off
$380.99 List Price:
$419.99🔗Converts between standards 📘 Overview Haugen skid steer auger bits in five series, sized 4" to 48", in 2" Hex or 2 9/16" Round shaft. The series is chosen by ground condition, not by preference — a fabricated head in rock will not last,... -
$3.00 Off
$25.99 List Price:
$28.99Pengo by Paladin Soil rating 5–6 Exclusive to the BoRH head Overview These Pengo rock auger bullet teeth — the P21 RR conical tooth, stocked as PG-137990 — are designed exclusively for the Pengo BoRH bolt-on rock head. Each tooth weighs 0.59 lb and... -
$4.00 Off
$37.99 List Price:
$41.99Made in USA Direct fit Overview Of the auger teeth on a Digga A4 cutting head, the TS-3 outer tooth is the one that wears fastest. The outer position travels the largest circumference per revolution, so it covers more ground and more material than... -
$2.00 Off
$14.99 List Price:
$16.99Pengo by Paladin Soil rating 5–6 Severe Rock Ripper standard Overview These Pengo rock auger teeth — the S-RL08 standard rock tooth, stocked as PG-990021 — are the conical teeth supplied as standard on the Pengo Severe Rock Ripper auger. Each weighs 0.7 lb... -
$9.00 Off
$396.99 List Price:
$405.99Digga 2-Inch Hex Outer Auger Extension When a hole must reach below the effective length of the auger bit, a compatible extension adds working reach between the drive and the bit. This Digga auger extension is identified as a 2-inch hex outer model, providing... -
$2.00 Off
$21.99 List Price:
$23.99Made in USA Direct fit Overview These tungsten auger teeth are the TS-C-3, the multi-faced inner tooth for Digga A4 bits — the same pocket and the same profile as the steel TS-C-1, with tungsten brazed onto the cutting face. That brazing is the... -
$16.00 Off
$157.99 List Price:
$173.99Made in USA Direct fit Overview This tungsten auger pilot is the PM-SQ-3 from Digga’s A4 Heavy Conditions set — the same square drive as the steel PM-SQ-1, with tungsten on the cutting point. It is the pilot supplied on Heavy Conditions A4 bits... -
$8.00 Off
$362.99 List Price:
$370.99Digga Auger Adapters for Different Output Shafts An auger bit and drive need compatible connection points to work together. Digga auger adapters provide a practical way to bridge a difference in output shaft, including transitions between hex and round hubs. For skid steer auger... -
$18.00 Off
$852.99 List Price:
$870.99Genuine Digga auger bit Includes pin, clip, teeth and pilot Overview The Digga RC4 is a taper tooth auger bit for skid steer — one bit for earth, clay and fracturable rock, rather than two bits for two jobs. It runs a 2 inch... -
$1.00 Off
$41.99 List Price:
$42.99Made in USA Direct fit Overview This square-drive auger pilot is the PM-SQ-1 for Digga A4 earth auger bits — the point at the centre of the head that enters the ground first and holds the auger where you set it. Digga moved this... -
$21.00 Off
$1,029.99 List Price:
$1,050.99Genuine Digga auger bit Includes pin, clip, teeth and pilot Overview The Digga RC6 is a taper tooth rock and earth combo auger bit — one bit for earth, clay and fracturable rock, rather than two bits for two jobs. It runs a 2.5... -
$49.00 Off
$484.99 List Price:
$533.99📘 Overview The Blue Diamond Heavy Duty Auger Bits are skid steer auger bits for boring clean, straight holes in normal soil conditions. Each bit mounts to a 2″ hex auger-drive interface that fits Blue Diamond and compatible auger drives, and this listing offers... -
$25.00 Off
$1,205.99 List Price:
$1,230.99Genuine Digga auger bit Includes pin, clip, teeth and pilot Overview The Digga DR6 is a dedicated rock auger fitted with rotating carbide picks, built for fracturable rock, shale and permafrost rather than for soil. It runs a 2.5 inch hex hub, with a...
SHOP SKID STEER AUGERS BY TYPE
CHOOSING THE RIGHT EXCAVATOR PARTS & ATTACHMENTS
Hydraulic Flow & Machine Compatibility
Match the drive to your skid steer’s flow and pressure specs. If you’re running a mini model or an older machine, you may need an adapter plate. Just ask us — we’ll confirm the right auger for skid steer based on your setup.
Soil Conditions & Bit Type
Soil matters. A standard earth bit may struggle in rocky ground. A combo or rock bit can power through tough conditions but may be overkill for soft soil. For mixed jobs, consider switching between auger attachment for skid steer setups based on terrain.
Hole Size & Auger Diameter
Choose your skid steer auger bit based on the diameter you need to drill. You can always clean out edges or offset slightly, but starting with the right size saves time and cleanup.
Attachments and Accessories
Think about what you need beyond the auger itself. Our skid steer auger attachment kits often include extensions, bits, and mounting gear so you’re ready to drill right out of the box.
WHY BUY SKID STEER AUGERS FROM ESKIDSTEER.COM
Curated Top Brands
We’re an authorized dealer for Digga, Pengo, and other trusted names. Every skid steer auger attachment we carry is selected for real-world performance, not just spec sheets.
Customer Satisfaction Guarantee
We back everything we sell. If there’s ever an issue, our team will work fast to resolve it so your auger system keeps moving.
Competitive Prices & Financing Options
Get more value out of your equipment budget. We also offer easy financing on skid steer augers so you can drill now and pay over time.
Fast Shipping & Availability
Most skid steer augers in our warehouse are ready to ship. You get faster delivery and more time working, not waiting.
Expert Guidance & Fitment Help
Not sure what drive or bit fits your loader? Our team can help. We’ve matched thousands of skid loader auger attachment kits to all types of machines.
NEED HELP CHOOSING THE RIGHT SKID STEER AUGER?
Drilling through rock or prepping fence lines? Our team will help you choose the right auger, bit, and drive kit for your machine and the job ahead.
Contact Us →
FAQs
What’s the difference between earth auger bits and rock auger bits?
Skid steer auger bits for earth have chisel edges and replaceable pilot points. Rock bits use tougher steel and bullet-style teeth for hard surfaces like asphalt or concrete.
Do I need a high-flow skid steer to run an auger attachment?
Not always. While some augers need high-flow, many auger attachment for skid steer kits are built for standard flow. We’ll help match you with the right motor for your loader.
How do I maintain a skid steer auger attachment for long life?
Grease regularly, check and replace bits, clean after use, and tighten bolts. Store your skid steer auger attachment in a dry place and oil any exposed metal for rust protection.
What is included in a skid steer auger drive kit?
Most kits come with everything except the skid steer auger bit, which you choose based on your needs. Once paired, you're ready to mount and drill.
How can I get help choosing the right auger attachment for my skid steer?
Call 1-866-757-8337 or send us a message using the website contact form. We’ll help you find the right setup fast.
What size auger drive do I need?
Your drive unit must match your machine's hydraulic flow (GPM) and pressure (PSI). Using a drive rated for 10-20 GPM on a 30 GPM machine can damage the motor, while using a large drive on a low-flow machine will result in stalling.
Do your auger packages come with hoses?
Yes, our Digga auger packages come job-ready with the drive unit, mounting frame, and hydraulic hoses with flush-face quick disconnects included, so you can plug and play immediately.
Can I drill through rock?
Standard earth bits are for dirt and clay. For rock, concrete, or frozen ground, you need a specialized rock bit with carbide teeth. Attempting to drill rock with a standard bit will damage the pilots and teeth.
CUSTOMER SUPPORT
If you need support, we’re here to help.
Mon-Fri: 8am-4:30pm CT
Sat-Sun: Closed
You can also email us for customer service or product support.
support@eskidsteer.com
Call or Text
To place a new order or for assistance with an existing order call or text us at
+1 (866) 757-8337
Live Chat
Have questions or need help?
Chat with us using the icon in the bottom left.
Start new chat
- Choosing a selection results in a full page refresh.