-
$20.00 Off
$132.99 List Price:
$152.99🔩14 sockets included 🔧Installation tool supplied 🔌Attachment side 📘 Overview This 14 pin connector kit builds or rebuilds the attachment-side connector on any machine using the 14-pin Deutsch HD standard. It is the female half — the connector that lives on the attachment and... -
$36.00 Off
$240.99 List Price:
$276.99🔧6 solenoid outputs 🔌Pre-wired, no splicing 🎛Delphi, Deutsch or DIN 📘 Overview The SG-BPH-14-6-9DP is a pre-wired bypass harness that takes the 14-pin connector on your machine and breaks it out to six individual 2-pin outputs on the attachment side. It is the harness... -
$6.00 Off
$34.99 List Price:
$40.99🛡Protects the connector 🔩Aluminium, OEM Deutsch 🚜8 or 14 pin, machine side 📘 Overview An OEM Deutsch aluminium dust cap for 8-pin and 14-pin Deutsch HD machine-side connectors. It covers the machine connector whenever no attachment is plugged in, keeping dirt, water and impact... -
$20.00 Off
$132.99 List Price:
$152.99🔩Genuine Deutsch components 🔧Machine side 🚜14 pin loaders 📘 Overview A complete Deutsch HD 14-pin male connector rebuild kit for the machine side of a skid steer or compact track loader. It uses genuine OEM-spec Deutsch components rather than aftermarket copies, and includes everything... -
$18.00 Off
$122.99 List Price:
$140.99🔧Activates high flow circuit 🔌Plugs into the 14 pin connector 🚜Cat D-Series, Next Gen, Develon 📘 Overview The SG-CTHF-14 high flow plug activates the high-flow hydraulic circuit on Caterpillar D-Series, Next Gen and Develon skid steer loaders. It installs into the machine's 14-pin connector... -
$10.00 Off
$63.99 List Price:
$73.99🔩All sockets and seals 🔧Attachment side 🚜John Deere 3 pin 📘 Overview A complete Deutsch HD 3-pin female connector kit for the John Deere round attachment-side connector. Sockets, seals and body components are all included for a full build or rebuild. It is the... -
$139.00 Off
$931.99 List Price:
$1,070.99🔧6 switched outputs 🔌Plugs into 7 pin Trident 🚜Loaders, Toolcat, Versahandler 📘 Overview The SG-CAN60-14 lets a Bobcat 7-pin CAN machine run attachments that were never built to speak Bobcat's control language. It plugs into the 7-pin Trident connector, reads the CAN messages your... -
$43.00 Off
$289.99 List Price:
$332.99🔌Plug and play 🔧2 switched ports 🚜Fits most 14 pin loaders 📘 Overview The SG-BC14-JD03A lets a 14-pin loader run John Deere 3-pin controlled attachments. The 14-pin end plugs into the machine, the round John Deere 3-pin end plugs into the attachment, and two... -
$51.00 Off
$343.99 List Price:
$394.99🔧2 switched outputs 📅SVL machines before 2018 🔌Genuine Deutsch connectors 📘 Overview The SG-KB-01 is the machine-side control harness for Kubota SVL75, SVL90 and SVL95 compact track loaders built before 2018. It provides two switched outputs, a keyed 12-volt supply and a ground, installs... -
$43.00 Off
$289.99 List Price:
$332.99🔧4 solenoid outputs 🔌Pre-wired 🚜Cat ABC, ASV, Terex 📘 Overview The SG-BPH-8-4-9DP plugs into the 8-pin machine port on a Caterpillar ABC Series, ASV or Terex loader and breaks it out to four pre-wired 2-pin outputs on the attachment side. It is the harness... -
$20.00 Off
$132.99 List Price:
$152.99🔩Genuine Deutsch components 🔧Attachment side 🚜Cat ABC, ASV, Terex 📘 Overview A complete Deutsch HD 8-pin female connector rebuild kit for the attachment side of Caterpillar ABC Series, ASV and Terex loaders. Genuine OEM-spec Deutsch components, with everything needed for a full rebuild included.... -
$58.00 Off
$387.99 List Price:
$445.99🔧4 switched outputs 🔌No CAN bus required 🚜Any machine brand 📘 Overview The SG-JCB-100 Attachment Control Box 4 gives four independently switched 12-volt solenoid channels to any skid steer or compact track loader — including older machines and machines with no factory attachment control... -
$32.00 Off
$210.99 List Price:
$242.99🔧2 spade lug outputs 📏9 foot harness 🚜John Deere 3 pin 📘 Overview A nine-foot harness running from a John Deere 3-pin round machine connector to two standard spade lug terminals on the attachment side. It is for solenoid-controlled attachments whose connections are bare... -
$43.00 Off
$289.99 List Price:
$332.99🔌Plug and play 🌲Swing boom cutters 🚜Any 14 pin loader 📘 Overview The SG-BC14-HD14 runs CID, Spartan, Prowler and Skid Steer Pro swing boom cutters from a 14-pin loader. It bridges the machine's 14-pin connector to the CID-style 6-pin round attachment connector, with no... -
$43.00 Off
$289.99 List Price:
$332.99Description Here's a Genius idea. Why not allow people with Bobcat attachments run them on their Cat/Terex/ASV Skid Steer Loader? This adapter does just that. Just plug one end into your Cat/Terex/ASV Loader and plug the other into your attachment equipped with a 14 pin... -
$39.00 Off
$259.99 List Price:
$298.99🔀Two independent outputs 🔌Plug and play 🚜Any 14 pin loader 📘 Overview The SG-PP2-14 plugs into a Deutsch HD 14-pin machine port and provides two independent Deutsch outputs. It is the simplest way to get two usable switched connections from a 14-pin machine without... -
$24.00 Off
$161.99 List Price:
$185.99🔩Complete rebuild 🔧Attachment side 🚜14 pin Deutsch 📘 Overview The ultimate rebuild kit for a Deutsch HD 14-pin female connector on the attachment side. It includes every component for a complete rebuild — body, all fourteen contacts, seals, cap and strain relief. Choose this... -
$106.00 Off
$705.99 List Price:
$811.99🔌CAN to 3 pin 🔧Controller 🚜Bobcat CAN machines 📘 Overview A controller arrangement for running a John Deere 3-pin controlled attachment from a Bobcat 7-pin CAN machine. Because the Bobcat 7-pin port carries a CAN control signal rather than switched power, this needs a... -
$18.00 Off
$117.99 List Price:
$135.99🔩All pins and seals included 🔧Attachment side 🚜Bobcat 7 pin Trident 📘 Overview This is the male Trident (ITT) 7-pin connector for the attachment side of a Bobcat machine. It rebuilds a damaged attachment connector without replacing the whole wiring harness — body, pins,... -
$58.00 Off
$387.99 List Price:
$445.99📹Wireless rear camera 🖥Cab-mounted display 🚜Any skid steer or CTL 📘 Overview A wireless backup camera system for skid steers and compact track loaders. The camera mounts at the rear of the machine and sends a live feed to a cab-mounted display, removing the...
SHOP SKID STEER GENIUS PARTS BY TYPE
HOW TO CHOOSE THE RIGHT COMPONENTS & PARTS
Know Your Machine's Pin Configuration
Most machines run 7-pin, 8-pin, or 14-pin connectors. Check your specs or take a look at the plug on your attachment port. Skid Steer Genius makes gear that’s built to match, so you skip the guesswork and get straight to work.
Match The Attachment Brand And Controls
What are you trying to power? Just on and off, or multiple functions? Skid Steer Genius offers control boxes and harnesses designed around exactly that. You get what your attachment needs—nothing more, nothing less.
Check Compatibility With Your Machine Brand
Machines from Cat, Bobcat, Kubota, and Deere all speak slightly different wiring languages. Skid Steer Genius helps translate that. Their systems are built to make your attachment work, no matter what you're plugging into.
Choose Plug-And-Play Or Hardwired
Not everyone wants to splice wires in the field. If you want speed, go plug-and-play. If you want permanence, go wired. Either way, Skid Steer Genius gives you a clean, reliable setup that won’t let you down.
WHY BUY SKID STEER GENIUS ATTACHMENTS FROM ESKIDSTEER.COM
Your Trusted Source For Skid Steer Solutions
We go beyond just selling parts. We deliver a full-service experience built around real-world work. With years of hands-on knowledge, we’ve made Skid Steer Genius the go-to for no-nonsense control system upgrades.
Quality You Can Count On
We stock nothing but the good stuff. When you see Skid Steer Genius in our store, you know it’s been tested and trusted to deliver consistent performance in the field
Flexible Payment & Financing
Whether you’re paying now or spacing it out, we’ve got options. Use credit cards or financing to fit your budget. Checkout takes just a few clicks.
Fast Nationwide Shipping
We don’t sit on orders. The second your gear ships, you’ll get tracking info so you know exactly when it’s showing up.
Personalized Customer Support
We’ll help you pick the right controller, answer compatibility questions, and guide you through the order. Whatever you need, we’re one call or message away.
NEED HELP CHOOSING THE RIGHT SKID STEER GENIUS SETUP?
Whether you're wiring up a new attachment or upgrading your control system, our team is here to make it simple. Get clear, expert advice, no tech jargon, just real answers.
Contact Us →
FAQs
Will Skid Steer Genius controllers work with any attachment?
Yes, they’re designed to power almost any electrically controlled attachment. Just make sure the number of functions lines up. Not sure what you need? Ask us. We’ll get you set up with the right Skid Steer Genius controller or harness.
Do I need to be a mechanic to install these kits?
Not at all. If you go with plug-and-play, it’s as simple as connecting the port and mounting the box. For hardwired kits, basic wiring knowledge helps but we include guides and support either way.
Can I use a Bobcat attachment on a John Deere skid steer?
Absolutely. That’s exactly what Skid Steer Genius was built for. With the right harness or control box, you can run attachments across brands without a hassle.
How do I know if my machine is compatible with these products?
Start by checking your machine’s model, your connector’s pin layout, and what tool you’re powering. Still unsure? Send us a photo or quick message. We’ll help you figure it out.
What happens if the controller doesn’t work with my attachment?
Get in touch. We’ll walk through it with you. Most issues are small fixes like a mismatched setting. If we need to swap parts, we’ll make it right fast. Your satisfaction is top priority.
CUSTOMER SUPPORT
If you need support, we’re here to help.
Mon-Fri: 8am-4:30pm CT
Sat-Sun: Closed
You can also email us for customer service or product support.
support@eskidsteer.com
Call or Text
To place a new order or for assistance with an existing order call or text us at
+1 (866) 757-8337
Live Chat
Have questions or need help?
Chat with us using the icon in the bottom left.
Start new chat
- Choosing a selection results in a full page refresh.