-
Vendor: Haugen Attachments📘 Overview Haugen's skid steer auger bits cover five series for different ground conditions: Standard Duty (fabricated head, bolt-on teeth, 6–36"), Heavy Duty (cast boring head, gage/wisdom teeth, 4–36"), Cast Head (cast steel head, drive-in teeth, 6–36"), Tree Auger (tapered dual-diameter, 18-9" through 48-24"),...
- from $348.99
$382.99- from $348.99
- Unit price
- per
-
Vendor: Haugen Attachments📘 Overview The Haugen Tele-Tach (MTACH) is a telehandler to skid steer adapter — a carriage-mounted plate that converts your telehandler's native coupler into a Universal Skid Steer Quick Attach (SSQA), allowing the machine to run the entire universe of skid steer bucket, grapple,...
- from $2,270.99
$2,498.99- from $2,270.99
- Unit price
- per
-
Vendor: Haugen Attachments📘 Overview The Haugen MTH is a trash hopper telehandler attachment — a high-capacity fork-slot debris container that slips onto standard telehandler pallet fork tines — no quick-attach required. Fork pockets are 48" deep, fits tines up to 2.5"×7.5". Chain with shurlock hook secures...
- from $3,339.99
$3,673.99- from $3,339.99
- Unit price
- per
-
Vendor: Haugen Attachments📘 Overview The Haugen MFBA is a fork mounted trailer spotter for forklifts and telehandlers — a 2" standard ball receiver that slides onto standard pallet fork tines to move trailers in yards and loading docks. Fork pockets are 48" deep and fit tines...
- $788.99
$867.99- $788.99
- Unit price
- per
-
Vendor: Haugen Attachments📘 Overview Haugen's conveyor bucket skid steer series are extended-depth general-purpose buckets designed to contain high volumes of loose material during transport without spillage. The MCB series uses a 1/4" reinforced steel floor, 3/8" side plates, 3/4" cutting edge, and inside gussets for structural...
- from $2,583.99
$2,842.99- from $2,583.99
- Unit price
- per
-
Vendor: Haugen Attachments📘 Overview Haugen MFE fork extensions add reach to existing forklift or telehandler tines — the simplest way to handle loads that exceed your machine's standard tine length. Available in four lengths (72"/6 ft, 90"/7.5 ft, 96"/8 ft, 108"/9 ft) and four cross-section sizes...
- from $664.99
$730.99- from $664.99
- Unit price
- per
-
Vendor: Haugen Attachments📘 Overview Haugen's skid steer mounting plates (weld-on series) are the same Universal Quick Attach mounting plates installed on every Haugen attachment from the factory — now available separately for fabricating custom attachments, replacing damaged plates, or adding SSQA compatibility to homemade or repurposed...
- from $194.99
$213.99- from $194.99
- Unit price
- per
-
Vendor: Haugen Attachments📘 Overview The Haugen rock digger skid steer attachment is a heavy-duty tine for prying for prying, digging, and lifting boulders and large rocks from the ground. Two models: MRD 36 (36" AR 400 steel tines, 45" frame, 8" tine spacing, 480 lbs) and...
- from $1,165.99
$1,281.99- from $1,165.99
- Unit price
- per
-
Vendor: Haugen Attachments📘 Overview The Haugen MIJ/MIJ-3000 is a forklift jib attachment — an adjustable fork-mounted boom jib for telehandlers and forklifts, extending from 4 to 12 feet through 8 preset positions with load capacities from 2,050 lbs (MIJ standard) to 2,900 lbs (MIJ-3000 heavy duty)...
- from $2,723.99
$2,995.99- from $2,723.99
- Unit price
- per
-
Vendor: Haugen Attachments📘 Overview Haugen's skid steer auger extension series extends your existing auger bit's digging depth without replacing the bit. Available in two types: Variable Length (adjustable — stores inside the column of 10"+ auger bits, increments every 6" on 12"-24" extensions, every 12" on...
- from $291.99
$320.99- from $291.99
- Unit price
- per
-
Vendor: Haugen Attachments📘 Overview Haugen's auger replacement teeth and points keep your skid steer auger bits cutting at full efficiency. Available in 10 part numbers covering three tooth profiles (Gage, Wisdom, Chisel) and two point types (Fishtail, 4" Point) in Dirt, Hardfaced, and Carbide grades. Part...
- from $11.99
$12.99- from $11.99
- Unit price
- per
-
Vendor: Haugen Attachments📘 Overview The Haugen MFSH-TS series is a fork mounted trailer spotter that combines a fork-mounted swivel hook with a 2" trailer receiver in a single fork-pocket unit — providing both overhead lifting and trailer spotting capability without needing two separate attachments. Available in...
- from $1,428.99
$1,571.99- from $1,428.99
- Unit price
- per
-
Vendor: Haugen AttachmentsShop the Skid Steer Stump Bucket - Haugen Attachments Ideal for skid-steers, designed specifically for stump removal Cantilever design for easy and efficient stump removal Excellent for cutting square-bottom trenches and waterways Constructed from durable 1/2" steel Equipped with three weld-on teeth featuring replaceable...
- $1,652.99
$1,817.99- $1,652.99
- Unit price
- per
-
Vendor: Haugen Attachments📘 Overview Haugen's extreme duty MHF series provides high-capacity pallet forks for skid steer in Class 2 (6,200 lb capacity) and Class 3 (10,000 lb capacity). Two frame widths: 45" and 60". Tine lengths from 48" to 96". Class 2 uses 1.75"×4" tines on...
- from $1,901.99
$2,091.99- from $1,901.99
- Unit price
- per
-
Vendor: Haugen Attachments📘 Overview Haugen's skid steer auger adaptor converts between mixing and matching between the two most common auger shaft sizes — 2" Hex and 2-9/16" Round. Two configurations: 10921 (2" Hex drive unit → 2-9/16" Round auger collar: use your Hex drive with a...
- from $243.99
$268.99- from $243.99
- Unit price
- per
-
Vendor: Haugen Attachments📘 Overview Haugen tractor bucket forks (Hook Over Bucket / HOB Forks) convert any tractor loader, tractor loader backhoe, or wheel loader bucket into a functional pallet fork system — without removing the bucket or adding a quick-attach. U-shaped steel brackets are welded to...
- from $1,706.99
$1,876.99- from $1,706.99
- Unit price
- per
-
Vendor: Haugen Attachments📘 Overview The Haugen HCH forklift concrete hopper is a fork-mounted concrete placement bucket for telehandlers and rough terrain forklifts — the practical solution for filling concrete forms in hard-to-reach places that a ready-mix truck cannot access. Available in four configurations: Manual Door (1...
- from $3,817.99
$4,198.99- from $3,817.99
- Unit price
- per
-
Vendor: Haugen Attachments📘 Overview The Haugen MDBT is a telehandler bucket attachment — high-capacity general-purpose bucket designed to fit most makes and models of telehandlers via a custom quick attach mount (specify your machine when ordering). Available in four widths — 60" (0.90 cu yd, 665...
- from $3,266.99
$3,593.99- from $3,266.99
- Unit price
- per
-
Vendor: Haugen Attachments📘 Overview The Haugen MFSB is a telehandler bucket attachment that slips over existing fork tines to convert any telehandler or forklift into a general-purpose bucket machine — no quick attach system required. Available in three styles: Standard (28" bucket height, fits 48" tines),...
- from $2,766.99
$3,042.99- from $2,766.99
- Unit price
- per
-
Vendor: Haugen Attachments📘 Overview The Haugen MWP Industrial Work Platform is a forklift man basket — a fork-mounted personnel platform for telehandlers and rough terrain forklifts, rated at 1,000 lbs maximum capacity in four platform sizes (4x4 to 4x9'8") with three configurable options: platform size, fork...
- from $2,532.99
$2,785.99- from $2,532.99
- Unit price
- per
SHOP HAUGEN ATTACHMENTS BY TYPE
HOW TO CHOOSE THE RIGHT HAUGEN ATTACHMENT
Match To Your Machine Type
If you're running a skid steer, you’ll want quick-attach tools like buckets, tillers, or stump grinders. For telehandlers, opt for fork-mounted jibs, hoppers, or work platforms. Wheel loader operators can look at pipe forks or jib booms sized for heavier lifts, all available through Haugen attachments.
Define The Job Task
If you’re hauling pallets, round bales, or trailers, choose tools made for load control. For digging and grading, rotary tillers and stump grinders are ideal. In lifting or rigging scenarios, jibs and truss-style attachments add reach and control. For cleanup jobs, Haugen attachments like snow blades and pushers are built to handle heavy debris.
Evaluate Frequency Of Use
For daily use, go with reinforced heavy-duty models with replaceable wear parts. If you only need the tool occasionally, standard-duty versions give you solid performance at a lower investment.
Ensure Compatibility & Fit
From skid steers to wheel loaders, Haugen attachments are available in multiple mounting styles like ISO, JRB, Fusion, or pin-on. Let us know your machine’s hydraulic flow, coupler size, and mounting plate. We’ll help you get the right fit.
WHY BUY HAUGEN ATTACHMENTS FROM ESKIDSTEER.COM
Certified Haugen Partner
We stock genuine Haugen attachments backed by warranty, with full access to replacement parts and manufacturer support.
Expertise In Telehandler & Skid Steer Compatibility
Our team helps you choose the right attachment based on your machine’s frame style, hydraulic flow, and intended job.
Complete Kits, Delivered Fast
We include hoses, pins, couplers, and manuals. Everything you need to start working right out of the box with your new Haugen attachments.
Transparent Pricing With Financing Available
We offer competitive prices with flexible financing, so you can keep your project moving without sacrificing quality or schedule.
Fast Nationwide Shipping
We ship directly from Haugen’s facility to your jobsite, with tracking provided the moment it leaves the dock.
NEED HELP CHOOSING THE RIGHT HAUGEN ATTACHMENT?
Not sure which attachment works with your telehandler or skid steer? Our experts can help you match the right Haugen tool to your machine, job type, and mounting system—fast and frustration-free.
Contact Us →
FAQs
Can I order replacement wear parts?
Yes. We carry or can source replacement tines, fork extensions, hoses, tips, and teeth for most Haugen attachments. Just reach out with your model number and we’ll track down the exact parts you need.
Do I need special tools to install Haugen attachments?
No. Most Haugen attachments are designed for fast, tool-free setup using standard quick-attach systems. You’ll be up and running in minutes without extra equipment.
What warranty coverage comes with Haugen attachments?
All Haugen attachments include a manufacturer-backed warranty. Coverage details vary by model, and our team can walk you through exactly what’s included before purchase.
What is the return policy for Haugen products?
If unused and in original condition, attachments can typically be returned within a defined window. Reach out to us for the most current Haugen attachments return policy.
Do you offer technical support for installation?
Yes. Our support team is available by phone or email to walk you through attachment setup, installation, and usage best practices.
CUSTOMER SUPPORT
If you need support, we’re here to help.
Mon-Fri: 8am-4:30pm CT
Sat-Sun: Closed
You can also email us for customer service or product support.
support@eskidsteer.com
Call or Text
To place a new order or for assistance with an existing order call or text us at
+1 (866) 757-8337
Live Chat
Have questions or need help?
Chat with us using the icon in the bottom left.
Start new chat
- Choosing a selection results in a full page refresh.