-
$54.00 Off
$2,606.99 List Price:
$2,660.995-yr gearbox warranty 3-yr motor warranty Lifetime shaft pull-out cover Overview This 3DSS mini excavator auger attachment suits mini excavators and backhoes up to 11,000 lbs (up to 5T). It brings 2,829 ft-lbs at 3,000 PSI on a 2 inch hex shaft, and comes... -
$16.00 Off
$739.99 List Price:
$755.99Excavator Double Pin Mount for Auger Drives – Digga Keep a compatible auger drive supported at both dipper pins and let the excavator boom set the drilling angle. The Digga Excavator Double Pin Mount connects the drive to the excavator’s two-pin mounting point, rather... -
$140.00 Off
$6,860.99 List Price:
$7,000.995-yr gearbox warranty 3-yr motor warranty Lifetime shaft pull-out cover Overview This 9DDS excavator auger attachment is the entry point to Digga's 9 to 12 tonne range and the drive most 20,000 lb machines end up on: 7,761 ft-lbs at 3,000 PSI, a 2.5... -
$688.35 Off
$6,889.99 List Price:
$7,578.345-yr gearbox warranty 3-yr motor warranty Lifetime shaft pull-out cover Overview At 9,897 ft-lbs, this 12DDS excavator auger attachment carries 28 percent more turning force than the 9DDS on the same 2.5 inch hex shaft, and asks 22 GPM rather than 18 to produce... -
$675.00 Off
$33,075.99 List Price:
$33,750.99201 HP radial piston motor 100mm square shaft 5,000 PSI rated Overview The SD95HPS-ECV is a helical pile driver attachment — Digga's high powered Supa drive at 69,244 ft-lbs with the Energy Control Valve fitted from the factory. The ECV is what separates an... -
$598.00 Off
$29,262.99 List Price:
$29,860.99201 HP radial piston motor 100mm square shaft 5,000 PSI rated Overview The SD95HPS is Digga's high powered Supa drilling drive at 69,244 ft-lbs — the torque class where an auger drive stops being an attachment and becomes the machine's main job. Sold here... -
$598.00 Off
$29,262.99 List Price:
$29,860.99201 HP radial piston motor 100mm square shaft 5,000 PSI rated Overview The SD80HPS is Digga's high powered Supa drilling drive at 62,638 ft-lbs — the torque class where an auger drive stops being an attachment and becomes the machine's main job. Sold here... -
$776.00 Off
$37,994.99 List Price:
$38,770.99Made in USA ECV fitted Overview This screw anchor drive is the Digga SD95, part of the Supa range built specifically for helical pile and screw anchor installation rather than adapted from a drilling drive. It is the largest drive in the Supa two-speed... -
$776.00 Off
$37,994.99 List Price:
$38,770.99Made in USA ECV fitted Overview This screw anchor drive is the Digga SD80, part of the Supa range built specifically for helical pile and screw anchor installation rather than adapted from a drilling drive. It is the second-heaviest drive in the range. It... -
$675.00 Off
$33,075.99 List Price:
$33,750.99201 HP radial piston motor 100mm square shaft 5,000 PSI rated Overview The SD80HPS-ECV is a helical pile driver attachment — Digga's high powered Supa drive at 62,638 ft-lbs with the Energy Control Valve fitted from the factory. The ECV is what separates an... -
$776.00 Off
$37,994.99 List Price:
$38,770.99201 HP radial piston motor 100mm square shaft 5,000 PSI rated Overview The SD70HPT is Digga's two speed high powered Supa helical pile driver attachment: 52,007 ft-lbs in high torque, a low torque range that turns at 51 RPM for speed, and the Energy... -
$598.00 Off
$29,262.99 List Price:
$29,860.99201 HP radial piston motor 100mm square shaft 5,000 PSI rated Overview The SD70HPS is Digga's high powered Supa drilling drive at 51,634 ft-lbs — the torque class where an auger drive stops being an attachment and becomes the machine's main job. Sold here... -
$776.00 Off
$37,994.99 List Price:
$38,770.99201 HP radial piston motor 100mm square shaft 5,000 PSI rated Overview The SD50HPT is Digga's two speed high powered Supa helical pile driver attachment: 39,728 ft-lbs in high torque, a low torque range that turns at 66 RPM for speed, and the Energy... -
$675.00 Off
$33,075.99 List Price:
$33,750.99201 HP radial piston motor 100mm square shaft 5,000 PSI rated Overview The SD70HPS-ECV is a helical pile driver attachment — Digga's high powered Supa drive at 51,634 ft-lbs with the Energy Control Valve fitted from the factory. The ECV is what separates an... -
$776.00 Off
$37,994.99 List Price:
$38,770.99Made in USA ECV fitted Overview This screw anchor drive is the Digga SD70, part of the Supa range built specifically for helical pile and screw anchor installation rather than adapted from a drilling drive. It sits in the middle of the range and... -
$776.00 Off
$37,994.99 List Price:
$38,770.99Made in USA ECV fitted Overview This screw anchor drive is the Digga SD50, part of the Supa range built specifically for helical pile and screw anchor installation rather than adapted from a drilling drive. It sits one step above the SD45 with the... -
$776.00 Off
$37,994.99 List Price:
$38,770.99Made in USA ECV fitted Overview This screw anchor drive is the Digga SD45, part of the Supa range built specifically for helical pile and screw anchor installation rather than adapted from a drilling drive. It is the entry point to the Supa range... -
$598.00 Off
$29,262.99 List Price:
$29,860.99201 HP radial piston motor 100mm square shaft 5,000 PSI rated Overview The SD50HPS is Digga's high powered Supa drilling drive at 39,463 ft-lbs — the torque class where an auger drive stops being an attachment and becomes the machine's main job. Sold here... -
$675.00 Off
$33,075.99 List Price:
$33,750.99201 HP radial piston motor 100mm square shaft 5,000 PSI rated Overview The SD50HPS-ECV is a helical pile driver attachment — Digga's high powered Supa drive at 39,463 ft-lbs with the Energy Control Valve fitted from the factory. The ECV is what separates an... -
$776.00 Off
$37,994.99 List Price:
$38,770.99201 HP radial piston motor 100mm square shaft 5,000 PSI rated Overview The SD45HPT is Digga's two speed high powered Supa helical pile driver attachment: 33,880 ft-lbs in high torque, a low torque range that turns at 78 RPM for speed, and the Energy...

















