-
Vendor: Star Industries📘 Overview The Star Industries 910 Series Mini Excavator Buckets provide heavy-duty digging capability for compact excavators in 10 width options from 10" through 36". Available in multiple pin configurations for compatibility across major mini excavator brands. 5-year factory guarantee. USA since 1981. ⚙️...
- from $613.99
$674.99- from $613.99
- Unit price
- / per
-
Vendor: Star Industries📘 Overview Star Industries LBA170 and LBA180 over-the-bucket forks clamp onto the existing skid steer bucket cutting edge, adding fork tine capability without removing the bucket. 36" and 42" tine options. LBA170 standard; LBA180 wider frame. 5-year factory guarantee. USA since 1981. ⚙️ Key...
- from $1,202.99
$1,323.99- from $1,202.99
- Unit price
- / per
-
Vendor: Star Industries📘 Overview The Star Industries Heavy Duty Forklift Trash Hoppers (Models 1425 and 1430) provide high-capacity debris collection for construction sites and facilities. Heavy-gauge steel, all-welded construction. Slip-on-forks for quick attachment. Dump with forklift tilt hydraulics. 5-year factory guarantee. USA since 1981. ⚙️ Key...
- from $3,573.99
$3,930.99- from $3,573.99
- Unit price
- / per
-
Vendor: Star Industries📘 Overview The Star Industries Heavy Duty Spreader Bar extends your forklift's ability to lift long, unwieldy loads — structural beams, rebar bundles, roofing sheets, pipe, and dimensional lumber. The 1140 (6', 10,000 lb) and 1149 (7', 34,000 lb) are fixed-length models; the 1150C...
- from $2,826.99
$3,109.99- from $2,826.99
- Unit price
- / per
-
Vendor: Star Industries📘 Overview Star Industries Heavy Duty Skid Steer Auger Shaft Extensions add drilling depth to any 2"" hex shaft auger without requiring a new bit. Available in 24"" (160A-E24), 36"" (160A-E36), 48"" (160A-E48), 60"" (160A-E60), and 72"" (160A-E72) lengths. The 2"" hex coupler connects...
- from $288.99
$317.99- from $288.99
- Unit price
- / per
-
Vendor: Star Industries📘 Overview The Star Industries Mini Skid Steer Auger Kit is a complete auger drive system for Toro Dingo / Ditch Witch / Vermeer / Boxer / Ramrod mini skid steers and Bobcat MT series, available in two drive sizes: 160D-615M (6–15 GPM) and...
- from $692.99
$761.99- from $692.99
- Unit price
- / per
-
Vendor: Star Industries📘 Overview The Star Industries Model 660 Crane Forks are purpose-built below-the-hook crane attachments for lifting and placing masonry block, paving stones, and similar heavy unit masonry products. Rated at 6,000 lbs with 6 tines and a backstop to prevent load from slipping off...
- from $5,468.99
$6,015.99- from $5,468.99
- Unit price
- / per
-
Vendor: Star Industries📘 Overview The Star Industries Lift-N-Tow attachment turns your forklift into a tug — lifting the front wheels of trailers, carts, or equipment off the ground for precise towing and positioning. Three models: 1396C (standard), 1390B (5,000 lb lift / 10,000 lb tow), and...
- from $1,491.99
$1,640.99- from $1,491.99
- Unit price
- / per
-
Vendor: Star Industries📘 Overview The Star Industries 1360B Forklift Mounted Jib Boom extends your forklift or telehandler's reach by up to 12 feet with a maximum capacity of 6,000 lbs at 4' extension — enabling precise load placement over and under obstacles that a standard forklift...
- from $2,070.99
$2,277.99- from $2,070.99
- Unit price
- / per
-
Vendor: Star Industries📘 Overview The Star Industries 160A-P10 is the replacement carbide cutting head for the 160A-TP2 T-Post Auger bit. The carbide pilot is the first wear point on T-post auger bits — replacing just the head extends bit life without purchasing a new complete auger....
- $284.99
$312.99- $284.99
- Unit price
- / per
-
Vendor: Star Industries📘 Overview The Star Industries Crane Lift Boxes (Models 1454 and 1455) provide secure enclosed material transport for crane operations — delivering bulk material, tools, and supplies to elevated work areas safely and efficiently. Two models offer different capacity options. Below-the-hook crane attachment. 5-year...
- from $2,549.99
$2,804.99- from $2,549.99
- Unit price
- / per
-
Vendor: Star Industries📘 Overview The Star Industries FP200 series are replacement shafts for shaft-mounted fork carriages, available in 48"" (FP20048), 60"" (FP20060), and 72"" (FP20072) finished lengths. These allow operators to replace worn or damaged shafts on existing shaft-mounted fork carriage systems without replacing the entire...
- from $500.99
$550.99- from $500.99
- Unit price
- / per
-
Vendor: Star Industries📘 Overview The Star Industries Quick-Tach Truss Booms connect to the skid steer SSQA interface, turning a skid steer into a mobile lifting boom. Model 1335, 1302, and 1302-12K (12,000 lb rated) cover progressively higher lift capacities. Truss construction delivers rated capacity at manageable...
- from $2,659.99
$2,925.99- from $2,659.99
- Unit price
- / per
-
Vendor: Star Industries📘 Overview The Star Industries Safety Work Platform for telehandlers and rough-terrain forklifts provides elevated personnel access using your existing telehandler — without the cost and logistics of a separate aerial work platform. Available in three platform sizes: 1204C (4'×4', 350 lbs), 1206C (4'×6',...
- from $2,532.99
$2,785.99- from $2,532.99
- Unit price
- / per
-
Vendor: Star Industries📘 Overview The Star Industries Model 160A-TP2 Skid Steer T-Post Auger is purpose-built for installing T-posts (steel fence posts) in one fast drilling cycle. The 2" diameter solid stress-proof shaft with 38" OAL achieves 30" drilling depth. Features a replaceable 2" carbide pilot (Model...
- $1,553.99
$1,708.99- $1,553.99
- Unit price
- / per
-
Vendor: Star Industries📘 Overview The Star Industries Heavy Duty Bolt-On Blades (BOB series) replace welded cutting edges on skid steer buckets with a reversible 5/8" × 8" bolt-on system that delivers 3× the wear life of standard 1/2" × 6" welded edges. Available in 60" through...
- from $397.99
$436.99- from $397.99
- Unit price
- / per
-
Vendor: Star Industries📘 Overview The Star Industries Mortar Buggies (Models 105 and 106) are purpose-built for transporting mortar, grout, and masonry materials around construction job sites. Model 105: 6 cu ft capacity, 48"×48"×28", 236 lbs. 5-year factory guarantee. USA since 1981. ⚙️ Key Features Model 105:...
- from $1,124.99
$1,236.99- from $1,124.99
- Unit price
- / per
-
Vendor: Star Industries📘 Overview The Star Industries Model 155 Skid-Steer Trailer Spotter mounts to SSQA and allows the skid steer to spot (position) trailers at loading docks and facility areas. Eliminates dedicated yard tractor for occasional trailer positioning. 5-year factory guarantee. USA since 1981. ⚙️ Key...
- $966.99
$1,063.99- $966.99
- Unit price
- / per
-
Vendor: Star Industries📘 Overview The Star Industries Rock Auger Bit (Model 160A-R) is the company's most rugged auger for extreme drilling conditions — solid rock, concrete, fractured rock, frozen ground, and compacted soils. Larger 8"-36" diameter models feature a bolt-in 1-3/4" shaft pilot, reinforced 3/4" bottom...
- from $1,265.99
$1,392.99- from $1,265.99
- Unit price
- / per
-
Vendor: Star Industries📘 Overview The Star Industries Single Flight Heavy Duty Auger Bit (Model 160A-HDSF) is engineered for fast, clean hole drilling in black dirt, sandy soil, compacted soils, heavy clay, asphalt, frozen ground, and fractured rock. The single-flight design digs faster, carries more soil out...
- from $532.99
$585.99- from $532.99
- Unit price
- / per

















