-
$4.00 Off
$31.99 List Price:
$35.99Pengo by Paladin Fits Aggressor augers 40° or 50° attack angle Overview These Pengo carbide auger teeth — the Carbide Auger Tooth 40/50, part number 134519 — are a bolt-on replacement tooth for Pengo Aggressor augers, weighing 0.65 lb and rated by Pengo for... -
$46.00 Off
$459.99 List Price:
$505.99Pengo by Paladin Soil rating 5–6 Bolts to the Aggressor head Overview This Pengo rock auger bit conversion — the patented BoRH (Bolt-on Rock Head) — turns a standard Aggressor dirt auger into a rock auger without buying a second auger. Six sizes cover... -
$27.00 Off
$269.99 List Price:
$296.99Pengo by Paladin Soil rating 5–6 Severe Rock Ripper pilot Overview This Pengo rock bit auger pilot — the RRP 1.75 SQ, stocked as PG-137208 — is the centre pilot on the Pengo Severe Rock Ripper auger. At 15 lb it is by far... -
$1.00 Off
$9.99 List Price:
$10.99Pengo by Paladin Fits Aggressor augers 40° or 50° attack angle Overview These Pengo auger teeth — the Auger Tooth 40/50, part number 134501 — are a bolt-on replacement tooth for Pengo Aggressor augers, weighing 0.5 lb and rated by Pengo for soil conditions... -
$2.00 Off
$17.99 List Price:
$19.99Pengo by Paladin Fits Aggressor augers 40° or 50° attack angle Overview These Pengo auger teeth for hard ground — the Hardface Auger Tooth 40/50, part number 134802 — are a bolt-on replacement tooth for Pengo Aggressor augers, weighing 0.5 lb and rated by... -
$5.00 Off
$45.99 List Price:
$50.99Pengo by Paladin Three drill points Fits Aggressor & TriMax Overview This Pengo auger pilot bit — the Triflow Auger Bit Pilot Tooth (TF-350, part number 135088) — is the pilot that leads a Pengo auger into the ground. It weighs 5 lb and... -
$14.00 Off
$132.99 List Price:
$146.99Pengo by Paladin Three drill points Fits Aggressor & TriMax Overview This Pengo carbide tipped auger pilot bit — the Carbide Tipped Triflow Auger Bit Pilot Tooth (TF-350C, part number 135090) — is the pilot that leads a Pengo auger into the ground. It... -
$35.00 Off
$348.99 List Price:
$383.99🔗Converts between standards 📘 Overview Haugen skid steer auger bits in five series, sized 4" to 48", in 2" Hex or 2 9/16" Round shaft. The series is chosen by ground condition, not by preference — a fabricated head in rock will not last,... -
$2.00 Off
$14.99 List Price:
$16.99Pengo by Paladin Soil rating 5–6 Severe Rock Ripper standard Overview These Pengo rock auger teeth — the S-RL08 standard rock tooth, stocked as PG-990021 — are the conical teeth supplied as standard on the Pengo Severe Rock Ripper auger. Each weighs 0.7 lb... -
$1.00 Off
$32.99 List Price:
$33.99Made in USA Direct fit Overview Of the auger teeth on a Digga A4 cutting head, the TS-3 outer tooth is the one that wears fastest. The outer position travels the largest circumference per revolution, so it covers more ground and more material than... -
$3.00 Off
$137.99 List Price:
$140.99Made in USA Direct fit Overview This tungsten auger pilot is the PM-SQ-3 from Digga’s A4 Heavy Conditions set — the same square drive as the steel PM-SQ-1, with tungsten on the cutting point. It is the pilot supplied on Heavy Conditions A4 bits... -
$18.99
Made in USA Direct fit Overview These tungsten auger teeth are the TS-C-3, the multi-faced inner tooth for Digga A4 bits — the same pocket and the same profile as the steel TS-C-1, with tungsten brazed onto the cutting face. That brazing is the... -
$15.99
Made in USA Direct fit Overview These auger teeth are the DP-00C3SR rotating carbide bullet picks used on Digga DR6 dedicated rock augers, and they work on a different principle from every other tooth in the range. Fixed teeth wear on one face until... -
$29.00 Off
$484.99 List Price:
$513.99📘 Overview The Blue Diamond Heavy Duty Auger Bits are skid steer auger bits for boring clean, straight holes in normal soil conditions. Each bit mounts to a 2″ hex auger-drive interface that fits Blue Diamond and compatible auger drives, and this listing offers... -
$1.00 Off
$27.99 List Price:
$28.99Made in USA Direct fit Overview The TTD-3 is the double-tungsten outer auger teeth position on Digga RC4 combination bits, and the “double” is the point: two tungsten faces rather than one, fitted to the outer positions where an RC4 does its widest and... -
$13.00 Off
$126.99 List Price:
$139.99Pengo by Paladin 3 lb hand tool Tooth removal Overview This Pengo carbide tooth puller — the C30 Puller, part number 134090 — is the hand tool for removing SR-76SW Strata carbide teeth from a Pengo auger head. It weighs 3 lb. Pengo builds... -
$1.00 Off
$19.99 List Price:
$20.99Made in USA Direct fit Overview The TTS-3 is the single-tungsten inner auger teeth position on Digga RC4 combination bits. Where the outer TTD-3 carries two tungsten faces for wear, the inner tooth carries one — because the inner position is asked for breakout... -
$16.00 Off
$165.99 List Price:
$181.99Pengo by Paladin Three drill points Fits Aggressor & TriMax Overview This Pengo hardface auger pilot bit — the HardFace Triflow Auger Bit Pilot Tooth (TF-350HF, part number 135089) — is the pilot that leads a Pengo auger into the ground. It weighs 5.5... -
$79.00 Off
$1,290.99 List Price:
$1,369.99📘 Overview The Blue Diamond Rock Auger Bits are rock auger bits skid steer operators use to bore through rock, shale, frost, and the hardest ground. Each bit mounts to a 2″ hex auger-drive interface that fits standard auger drives, and this listing offers... -
$16.99
Made in USA Direct fit Overview This auger pilot tooth is the DP-C1HDLR, at the centre of a Digga DR6 rock auger head. On a dedicated rock auger the pilot takes a harder job than on any earth bit: it meets undisturbed rock at...
SHOP AUGER PARTS BY TYPE
CHOOSING THE RIGHT POST HOLE DIGGER PARTS
Match Your Drive System
Start by checking your shaft and bit series. Matching the right auger parts to your system ensures a better fit and better results when drilling through dense or varied soils.
Consider Ground Conditions
Different soils demand different gear. For clay or soft fill, use standard pilot teeth. Rocky or frozen terrain? Choose hardened auger parts with carbide tips and reinforced cutting edges.
Upgrade Or Replace Strategically
Worn or cracked auger parts can cause misalignment or reduce digging performance. Keeping spare tips and adapters on hand helps avoid downtime and extends tool life.
WHY BUY AUGER PARTS FROM ESKIDSTEER.COM
Built To Last
Our auger parts are made from heat-treated steel, reinforced alloys, and carbide for long life in even the toughest soil conditions.
Broad Compatibility
Choose from auger parts that work with top drive systems like Digga, Pengo, and others—perfect for easy swaps and upgrades.
Fast U.S. Shipping
We ship nationwide with accurate freight quotes, live order tracking, and fast turnaround to keep your schedule on track.
Competitive Pricing
Get premium auger parts at prices that make sense. We keep your operation moving without stretching your budget.
Expert Advice On-Demand
Not sure which post hole auger part fits your drive system or soil type? Our experts are ready to walk you through it.
BROWSE OUR AUGER PARTS NOW
Need help selecting the right auger parts for your machine or ground conditions? Our product specialists are here to provide you with clear answers, fast recommendations, and no stress.
Contact Us →
FAQs
How Do I Know When To Replace Auger Teeth Or Tips?
Slow digging, uneven holes, or worn drive system performance can mean your auger parts need replacing. Look for cracks, chips, or dull tips.
Do I Need A Special Tool To Replace Auger Teeth?
Most auger parts are bolt-on and come off with standard tools. For tight or stuck tips, a puller like the Pengo C123 helps with safer removal.
Are These Parts Compatible With Post Hole Diggers On Tractors?
Yes. Our auger parts are designed to work with most tractor-mounted diggers. Just match shaft size and tooth style to your auger setup.
What Do Auger Adapters Do?
Adapters let you use auger parts with different shaft sizes or between brands. Great for switching setups or sharing equipment.
Do Your Auger Replacement Parts Come With A Warranty?
We don’t offer direct warranties, but many auger parts are covered by manufacturers. See: https://eskidsteer.com/pages/return-and-refund-policy
CUSTOMER SUPPORT
If you need support, we’re here to help.
Mon-Fri: 8am-4:30pm CT
Sat-Sun: Closed
You can also email us for customer service or product support.
support@eskidsteer.com
Call or Text
To place a new order or for assistance with an existing order call or text us at
+1 (866) 757-8337
Live Chat
Have questions or need help?
Chat with us using the icon in the bottom left.
Start new chat
- Choosing a selection results in a full page refresh.