-
$4.00 Off
$31.99 List Price:
$35.99Pengo by Paladin Fits Aggressor augers 40° or 50° attack angle Overview These Pengo carbide auger teeth — the Carbide Auger Tooth 40/50, part number 134519 — are a bolt-on replacement tooth for Pengo Aggressor augers, weighing 0.65 lb and rated by Pengo for... -
$46.00 Off
$459.99 List Price:
$505.99Pengo by Paladin Soil rating 5–6 Bolts to the Aggressor head Overview This Pengo rock auger bit conversion — the patented BoRH (Bolt-on Rock Head) — turns a standard Aggressor dirt auger into a rock auger without buying a second auger. Six sizes cover... -
$44.00 Off
$438.99 List Price:
$482.99Pengo by Paladin Double flight, 5/16" thick 2" hex or 2 9/16" round Overview This Pengo skid steer auger bit — the Aggressor Earth Auger — is the professional-grade auger in the Pengo range, built for daily and constant use. Twenty-six configurations cover 6"... -
$27.00 Off
$269.99 List Price:
$296.99Pengo by Paladin Soil rating 5–6 Severe Rock Ripper pilot Overview This Pengo rock bit auger pilot — the RRP 1.75 SQ, stocked as PG-137208 — is the centre pilot on the Pengo Severe Rock Ripper auger. At 15 lb it is by far... -
$5.00 Off
$45.99 List Price:
$50.99Pengo by Paladin Three drill points Fits Aggressor & TriMax Overview This Pengo auger pilot bit — the Triflow Auger Bit Pilot Tooth (TF-350, part number 135088) — is the pilot that leads a Pengo auger into the ground. It weighs 5 lb and... -
$1.00 Off
$9.99 List Price:
$10.99Pengo by Paladin Fits Aggressor augers 40° or 50° attack angle Overview These Pengo auger teeth — the Auger Tooth 40/50, part number 134501 — are a bolt-on replacement tooth for Pengo Aggressor augers, weighing 0.5 lb and rated by Pengo for soil conditions... -
$2.00 Off
$17.99 List Price:
$19.99Pengo by Paladin Fits Aggressor augers 40° or 50° attack angle Overview These Pengo auger teeth for hard ground — the Hardface Auger Tooth 40/50, part number 134802 — are a bolt-on replacement tooth for Pengo Aggressor augers, weighing 0.5 lb and rated by... -
$14.00 Off
$132.99 List Price:
$146.99Pengo by Paladin Three drill points Fits Aggressor & TriMax Overview This Pengo carbide tipped auger pilot bit — the Carbide Tipped Triflow Auger Bit Pilot Tooth (TF-350C, part number 135090) — is the pilot that leads a Pengo auger into the ground. It... -
$3.00 Off
$25.99 List Price:
$28.99Pengo by Paladin Soil rating 5–6 Exclusive to the BoRH head Overview These Pengo rock auger bullet teeth — the P21 RR conical tooth, stocked as PG-137990 — are designed exclusively for the Pengo BoRH bolt-on rock head. Each tooth weighs 0.59 lb and... -
$1.00 Off
$32.99 List Price:
$33.99Made in USA Direct fit Overview Of the auger teeth on a Digga A4 cutting head, the TS-3 outer tooth is the one that wears fastest. The outer position travels the largest circumference per revolution, so it covers more ground and more material than... -
$2.00 Off
$14.99 List Price:
$16.99Pengo by Paladin Soil rating 5–6 Severe Rock Ripper standard Overview These Pengo rock auger teeth — the S-RL08 standard rock tooth, stocked as PG-990021 — are the conical teeth supplied as standard on the Pengo Severe Rock Ripper auger. Each weighs 0.7 lb... -
$18.99
Made in USA Direct fit Overview These tungsten auger teeth are the TS-C-3, the multi-faced inner tooth for Digga A4 bits — the same pocket and the same profile as the steel TS-C-1, with tungsten brazed onto the cutting face. That brazing is the... -
$3.00 Off
$137.99 List Price:
$140.99Made in USA Direct fit Overview This tungsten auger pilot is the PM-SQ-3 from Digga’s A4 Heavy Conditions set — the same square drive as the steel PM-SQ-1, with tungsten on the cutting point. It is the pilot supplied on Heavy Conditions A4 bits... -
$1.00 Off
$41.99 List Price:
$42.99Made in USA Direct fit Overview This square-drive auger pilot is the PM-SQ-1 for Digga A4 earth auger bits — the point at the centre of the head that enters the ground first and holds the auger where you set it. Digga moved this... -
$15.99
Made in USA Direct fit Overview These auger teeth are the DP-00C3SR rotating carbide bullet picks used on Digga DR6 dedicated rock augers, and they work on a different principle from every other tooth in the range. Fixed teeth wear on one face until... -
$1.00 Off
$27.99 List Price:
$28.99Made in USA Direct fit Overview The TTD-3 is the double-tungsten outer auger teeth position on Digga RC4 combination bits, and the “double” is the point: two tungsten faces rather than one, fitted to the outer positions where an RC4 does its widest and... -
$28.00 Off
$270.99 List Price:
$298.99Pengo by Paladin Three drill points Fits Aggressor & TriMax Overview This Pengo carbide auger pilot bit — the Carbide Triflow Auger Bit Pilot Tooth (TF-350CXC, part number 135091) — is the pilot that leads a Pengo auger into the ground. It weighs 5.8... -
$3.00 Off
$117.99 List Price:
$120.99Digga Auger Drive Mount Linkage A secure connection between the auger drive and its mount starts with the correct linkage. This genuine Digga Auger Drive Mount Linkage is the pinned connector used to join those components, providing the interface needed to assemble a compatible... -
$1.00 Off
$5.99 List Price:
$6.99Made in USA Direct fit Overview Digga TS-1 auger teeth are the outer replacement teeth for A4 earth auger bits — the bladed steel tooth that sits in the outer pockets of the cutting head and does the widest cutting work, wearing fastest as... -
$1.00 Off
$19.99 List Price:
$20.99Made in USA Direct fit Overview The TTS-3 is the single-tungsten inner auger teeth position on Digga RC4 combination bits. Where the outer TTD-3 carries two tungsten faces for wear, the inner tooth carries one — because the inner position is asked for breakout...











