A4 Outer Auger Tooth - Digga

📘 Overview

The Digga TS-1 Standard Outer Auger Tooth is the base-grade flat tooth for Digga A4 Earth Auger Bits — the most cost-effective option for light to moderate earth and clay drilling. The TS-1 uses a standard flat steel design optimized for general digging in loose soil, topsoil, and light clay conditions. Uses Digga's TRULOC/PADLOC tooth locking system for tool-free field replacement. Manufactured by Digga in Dyersville, Iowa, USA.

⚙️ Key Features

• Part No. TS-1 — standard flat outer tooth for Digga A4 Earth Auger Bits
• Standard steel flat tip — light to moderate earth and clay conditions
• Outer tooth position on the A4 auger head
• TRULOC/PADLOC locking — tool-free field replacement
• D665TL pocket compatible
• OEM Digga | Made in Dyersville, Iowa, USA

🔑 Benefits

• TS-1 is the lowest-cost tooth option — minimizes consumable cost in light conditions where MFT is unnecessary — in loose earth and topsoil, MFT teeth provide no meaningful performance advantage over standard flat teeth. Using TS-1 in these conditions reduces consumable cost per hole drilled without any loss of productivity.
• Flat tooth geometry provides smooth, clean cutting in loose to moderate soil — the flat face design shears through light earth efficiently and is less prone to loading up with sticky clay than chisel tooth designs in certain soil types.
• TRULOC field replacement takes 2–5 minutes — teeth can be replaced during the job — inspecting and swapping worn TS-1 teeth between hole cycles keeps the A4 cutting at peak efficiency without returning to a shop.
• OEM Digga manufacturing ensures fit and performance in the D665TL tooth pocket — aftermarket teeth with dimensional variations can cause loose fit, uneven loading, and accelerated pocket wear. TS-1 OEM teeth are manufactured to the exact D665TL pocket specification.

📊 Specifications

🔗 Attachment Compatibility

For Digga A4 Earth Auger Bits using D665TL tooth pockets. Outer tooth position. For light to moderate earth and clay only — for harder conditions, select TS-3 (MFT outer) or TS-C-3 (MFT chisel inner). Verify your A4 auger uses D665TL tooth blocks before ordering.

🚜 Machine Compatibility

Replacement wear part for Digga A4 Earth Auger Bits — compatible with skid steers and excavators up to 4.5 tons (9,900 lbs):

Machine compatibility inherited from the parent Digga A4 auger system (0.75T–4.5T skid steers and excavators using Digga 1MDS–4DSS drives).

❓ FAQs

📥 Downloads

Download Spec Sheet / Product Brochure (PDF)

🎥 Videos

Watch Product Video on YouTube