-
$11.00 Off
$539.99 List Price:
$550.99Made in USA 12-mo warranty Overview This mini loader auger mount is an extension mount, which holds the drive further forward and lower than a standard mini quick attach plate does. On a compact utility loader that changes what the machine can reach: you... -
$21.00 Off
$1,004.99 List Price:
$1,025.99Made in USA Teeth & pilot included Overview This 5-foot earth auger bit is the Digga A6, the general-purpose flat-tooth auger for high-flow drives on a 2.5" hex hub. The extra foot of body over the 4-foot A4 range matters more than it sounds:... -
$100.00 Off
$4,870.99 List Price:
$4,970.99Made in USA Crumber bar included Overview This mini skid steer trencher is the Digga Mini Bigfoot, built for compact utility loaders and walk-behind machines rather than full-size skid steers. It digs the same 36" depth as the full-size Bigfoot in the same 4"... -
$1.00 Off
$5.99 List Price:
$6.99Made in USA Direct fit Overview The TS-C-1 is the inner auger teeth position on Digga A4 earth auger bits — the teeth working closest to the pilot, in the inner pockets of the cutting head. They see less travel per revolution than the... -
$25.00 Off
$1,185.99 List Price:
$1,210.99Made in USA 12-mo warranty Overview This stand carries a Digga TPE extension frame off the machine, for transport and storage. A telescopic frame off the machine is an awkward object — long, heavy, and with nothing flat to rest on — and without... -
$19.00 Off
$926.99 List Price:
$945.99Made in USA 12-mo warranty Overview This HALO retrofit kit adds Digga’s LED auger alignment system to a drive that was not ordered with it. HALO sits in the hood of the drive and shows green when the auger is plumb and red when... -
$140.00 Off
$6,860.99 List Price:
$7,000.99Made in USA 5-yr warranty Overview This Digga excavator auger drive, the 9DDS, is the smaller of two models built for 9–12 tonne machines, sitting directly below the 12DDS on the same data sheet and sharing its shaft, bit range and mount pattern. It... -
$182.00 Off
$8,888.99 List Price:
$9,070.99Made in USA 5-yr warranty Overview The largest 2 speed auger drive Digga builds on a 2.5" hex shaft, the 7DDT is the top of the loader-mounted two-speed range and needs the most flow of the three to reach its rated torque. Beyond this... -
$62.00 Off
$3,018.99 List Price:
$3,080.99Made in USA 5-yr warranty Overview This skid steer auger attachment is the Digga 4DSS, the top of the standard-flow range, supplied with hoses, disconnects and a mount for one of four machine classes. It is the most torque available on a 2" hex... -
$9.00 Off
$396.99 List Price:
$405.99Made in USA 12-mo warranty Overview This hydraulic hose kit covers Digga’s 3/4" line range in lengths from 6 feet to 12 feet plus 87" and 106" options, with a choice of 1/2" or 3/4" flush-face disconnects. The larger hose bore matters on high-flow... -
$58.00 Off
$2,802.99 List Price:
$2,860.99Made in USA 5-yr warranty Overview This skid steer auger attachment is built around the Digga 2DSS drive and supplied as a complete package and configures across five machine classes — skid steer, mini skid steer, mini excavator, backhoe and tractor — from a... -
$726.00 Off
$7,256.99 List Price:
$7,982.99Made in USA 5-yr warranty Overview The Digga 12DDS excavator auger drive is a high-flow unit producing 9,897 ft-lbs of torque at 3,000 PSI (11,522 ft-lbs maximum at 3,500 PSI) for 9–12 tonne machines — 19,800 to 26,500 lbs. It runs on 22–48 GPM... -
$149.00 Off
$7,281.99 List Price:
$7,430.99Made in USA Crumber bar included Overview This skid steer trencher attachment steps up from the 1 5/8" pitch Bigfoot to a 2" pitch chain, and that heavier chain is what lets it reach 12" cutting widths and a 4-foot dig depth. It suits... -
$12.00 Off
$558.99 List Price:
$570.99Made in USA Teeth & pilot included Overview The Digga AB4 is a bolt-on skid steer auger bit, and the bolt-on part is the whole point: its teeth fasten with a bolt and nut rather than being driven into a pocket with a pin.... -
$56.00 Off
$2,714.99 List Price:
$2,770.99Made in USA 5-yr warranty Overview This skid steer auger attachment package pairs the Digga 1DSS drive with the mount your machine needs, delivering 1,452 ft-lbs of torque at 3,000 PSI (1,691 ft-lbs maximum at 3,500 PSI) on machines flowing 6–16 GPM, and ships... -
$79.00 Off
$3,841.99 List Price:
$3,920.99Made in USA 5-yr warranty Overview This high flow auger drive package pairs the Digga 4DDS with hoses, flush-face disconnects and a mount for a skid steer, mini excavator or backhoe. The 4DDS is the crossover model in Digga’s range: it is a high-flow... -
$72.00 Off
$3,518.99 List Price:
$3,590.99Made in USA 12-mo warranty Overview The XT40 is the heavy-duty inner auger extension on a 100mm square hub, in 6, 8 and 10 foot lengths. The square drive is the significant part: at the torque these drives produce, a hex connection becomes the... -
$17.00 Off
$823.99 List Price:
$840.99Made in USA 12-mo warranty Overview The XT25 is an auger extension of the inner type, on a 2.5" hex hub in 4, 6 and 8 foot lengths. Inner extensions differ from the more common outer bars in where they sit in the assembly,... -
$15.00 Off
$690.99 List Price:
$705.99Made in USA 12-mo warranty Overview This trencher excavator mount hitches a Digga Bigfoot trencher to an excavator coupler rather than a skid steer plate, which is what lets you trench along a bank, over a fence, or anywhere the machine cannot straddle the... -
$65.00 Off
$3,165.99 List Price:
$3,230.99Made in USA 12-mo warranty Overview This TPE extension frame is a telescopic piling and drilling extension for skid steer loaders, carrying Digga drives in the 5DDS to 7DDS range. Where a fixed frame holds the drive at a set height, a TPE telescopes...
SHOP DIGGA ATTACHEMENTS BY TYPE
HOW TO CHOOSE THE RIGHT DIGGA ATTACHMENTS
Match the Drive Unit to Your Machine
Digga auger drives come in different torque classes. If you're running a skid steer, a mid-range digga auger drive like the PDX2 might be perfect. Excavators often need more torque.
Consider the Ground Conditions
Not all dirt is equal. Loose soil? Standard bits will do. Clay or rock? You’ll want digga auger bits with bolt-on teeth for better bite and longer life on hard ground.
Look for Smart Features
Want faster, straighter holes? The digga halo system uses LED indicators to guide you as you drill. It's all about keeping your flight path true and consistent.
Don’t Forget Mounts & Hoses
We offer full kits with everything included hoses, mounts, even cradles. Tell us your hydraulic specs and we’ll match your setup with the right digga attachments.
WHY BUY DIGGA ATTACHMENTS FROM ESKIDSTEER.COM
Official Digga Partner
We’re a trusted source for authentic digga attachments, straight from the manufacturer. Every item is backed by full factory support and covered under warranty.
Expert Advice, No Guesswork
Our team knows these tools inside and out. Whether you're choosing a digga trencher or auger, we can walk you through torque specs, machine fit, and ground condition needs.
Complete Kits, Ready to Work
You won’t be chasing parts. Each setup includes the drive, hoses, mounts, and bits. Just bolt it on and get to work with a full digga augers system, pre-matched to your machine.
Transparent Pricing & Financing
What you see is what you pay. We also offer flexible financing so you can get the gear you need now without draining your budget.
Fast, Tracked Shipping
Your job can’t wait, and neither do we. Orders ship quickly with full tracking, so you always know where your digga attachments are and when they’ll arrive.
NEED HELP CHOOSING THE RIGHT DIGGA ATTACHMENT?
From torque specs to soil type, we’ve got you covered. Whether you're drilling, trenching, or mounting a drive head, our team can help you pick the right setup for your machine.
Contact Us →
FAQs
What size auger drive do I need for my skid steer?
It depends on your hydraulic flow and job type. For general dirt drilling, most standard-flow machines pair well with Digga’s PD series.
Are Digga augers compatible with other brands like Bobcat or CAT?
Yes. Digga attachments include universal mounts and hose options. We’ll help match the drive and bit setup to your machine’s specs.
How do I maintain a Digga auger drive?
Keep it greased, inspect bits, and store it dry. Digga auger drives are low-maintenance, but a quick check now and then saves downtime later.
What kind of teeth do I need for rocky ground?
Use bolt-on rock teeth or pilot points with wear protection. Let us know your soil type and we’ll guide you to the right digga auger bits.
Are Digga attachments covered by warranty?
Yes. All digga attachments we sell come with manufacturer-backed warranties. Coverage varies by model—ask us for details.`
CUSTOMER SUPPORT
If you need support, we’re here to help.
Mon-Fri: 8am-4:30pm CT
Sat-Sun: Closed
You can also email us for customer service or product support.
support@eskidsteer.com
Call or Text
To place a new order or for assistance with an existing order call or text us at
+1 (866) 757-8337
Live Chat
Have questions or need help?
Chat with us using the icon in the bottom left.
Start new chat
- Choosing a selection results in a full page refresh.