-
$65.00 Off
$3,165.99 List Price:
$3,230.99Made in USA 12-mo warranty Overview This TPE extension frame is a telescopic piling and drilling extension for skid steer loaders, carrying Digga drives in the 5DDS to 7DDS range. Where a fixed frame holds the drive at a set height, a TPE telescopes... -
$8.00 Off
$392.99 List Price:
$400.99Made in USA 12-mo warranty Overview The cradle is the half of a slide-shift auger drive mount that actually carries the drive — it slides across the frame and holds the auger, and it includes the linkage and pin. It is ordered separately from... -
$70.00 Off
$3,400.99 List Price:
$3,470.99Made in USA 12-mo warranty Overview This large TPE extension frame is the telescopic piling and drilling extension built for the heavier Digga drives — 9DDS through 16DDS — on a skid steer loader. It is the same idea as the standard TPE frame... -
$19.00 Off
$921.99 List Price:
$940.99Made in USA 12-mo warranty Overview This fixed-centre skid steer auger mount holds the drive on the machine centreline rather than letting it shift laterally, which is the simpler and stiffer of the two ways Digga mounts an auger to a loader. If you... -
$675.00 Off
$33,075.99 List Price:
$33,750.99Made in USA 5,000 PSI Overview The Digga SD95HPS is a high-powered single-speed drive built for anchoring work, and the figure that defines it is pressure: the high-powered Supa drives run at up to 5,000 PSI where the standard range stops at 3,500. This... -
$598.00 Off
$29,262.99 List Price:
$29,860.99Made in USA 5,000 PSI Overview The Digga SD95HPS is a high-powered single-speed drive built for drilling work, and the figure that defines it is pressure: the high-powered Supa drives run at up to 5,000 PSI where the standard range stops at 3,500. This... -
$776.00 Off
$37,994.99 List Price:
$38,770.99Made in USA ECV fitted Overview This screw anchor drive is the Digga SD95, part of the Supa range built specifically for helical pile and screw anchor installation rather than adapted from a drilling drive. It is the largest drive in the Supa two-speed... -
$675.00 Off
$33,075.99 List Price:
$33,750.99Made in USA 5,000 PSI Overview The Digga SD80HPS is a high-powered single-speed drive built for anchoring work, and the figure that defines it is pressure: the high-powered Supa drives run at up to 5,000 PSI where the standard range stops at 3,500. This... -
$598.00 Off
$29,262.99 List Price:
$29,860.99Made in USA 5,000 PSI Overview The Digga SD80HPS is a high-powered single-speed drive built for drilling work, and the figure that defines it is pressure: the high-powered Supa drives run at up to 5,000 PSI where the standard range stops at 3,500. This... -
$776.00 Off
$37,994.99 List Price:
$38,770.99Made in USA ECV fitted Overview This screw anchor drive is the Digga SD80, part of the Supa range built specifically for helical pile and screw anchor installation rather than adapted from a drilling drive. It is the second-heaviest drive in the range. It... -
$776.00 Off
$37,994.99 List Price:
$38,770.99Made in USA 5,000 PSI Overview The Digga SD70HPT is a high-powered two-speed drive built for anchoring work, and the figure that defines it is pressure: the high-powered Supa drives run at up to 5,000 PSI where the standard range stops at 3,500. This... -
$675.00 Off
$33,075.99 List Price:
$33,750.99Made in USA 5,000 PSI Overview The Digga SD70HPS is a high-powered single-speed drive built for anchoring work, and the figure that defines it is pressure: the high-powered Supa drives run at up to 5,000 PSI where the standard range stops at 3,500. This... -
$598.00 Off
$29,262.99 List Price:
$29,860.99Made in USA 5,000 PSI Overview The Digga SD70HPS is a high-powered single-speed drive built for drilling work, and the figure that defines it is pressure: the high-powered Supa drives run at up to 5,000 PSI where the standard range stops at 3,500. This... -
$776.00 Off
$37,994.99 List Price:
$38,770.99Made in USA ECV fitted Overview This screw anchor drive is the Digga SD70, part of the Supa range built specifically for helical pile and screw anchor installation rather than adapted from a drilling drive. It sits in the middle of the range and... -
$776.00 Off
$37,994.99 List Price:
$38,770.99Made in USA 5,000 PSI Overview The Digga SD50HPT is a high-powered two-speed drive built for anchoring work, and the figure that defines it is pressure: the high-powered Supa drives run at up to 5,000 PSI where the standard range stops at 3,500. This... -
$675.00 Off
$33,075.99 List Price:
$33,750.99Made in USA 5,000 PSI Overview The Digga SD50HPS is a high-powered single-speed drive built for anchoring work, and the figure that defines it is pressure: the high-powered Supa drives run at up to 5,000 PSI where the standard range stops at 3,500. This... -
$598.00 Off
$29,262.99 List Price:
$29,860.99Made in USA 5,000 PSI Overview The Digga SD50HPS is a high-powered single-speed drive built for drilling work, and the figure that defines it is pressure: the high-powered Supa drives run at up to 5,000 PSI where the standard range stops at 3,500. This... -
$776.00 Off
$37,994.99 List Price:
$38,770.99Made in USA ECV fitted Overview This screw anchor drive is the Digga SD50, part of the Supa range built specifically for helical pile and screw anchor installation rather than adapted from a drilling drive. It sits one step above the SD45 with the... -
$776.00 Off
$37,994.99 List Price:
$38,770.99Made in USA 5,000 PSI Overview The Digga SD45HPT is a high-powered two-speed drive built for anchoring work, and the figure that defines it is pressure: the high-powered Supa drives run at up to 5,000 PSI where the standard range stops at 3,500. This... -
$675.00 Off
$33,075.99 List Price:
$33,750.99Made in USA 5,000 PSI Overview The Digga SD45HPS is a high-powered single-speed drive built for anchoring work, and the figure that defines it is pressure: the high-powered Supa drives run at up to 5,000 PSI where the standard range stops at 3,500. This...
SHOP DIGGA ATTACHEMENTS BY TYPE
HOW TO CHOOSE THE RIGHT DIGGA ATTACHMENTS
Match the Drive Unit to Your Machine
Digga auger drives come in different torque classes. If you're running a skid steer, a mid-range digga auger drive like the PDX2 might be perfect. Excavators often need more torque.
Consider the Ground Conditions
Not all dirt is equal. Loose soil? Standard bits will do. Clay or rock? You’ll want digga auger bits with bolt-on teeth for better bite and longer life on hard ground.
Look for Smart Features
Want faster, straighter holes? The digga halo system uses LED indicators to guide you as you drill. It's all about keeping your flight path true and consistent.
Don’t Forget Mounts & Hoses
We offer full kits with everything included hoses, mounts, even cradles. Tell us your hydraulic specs and we’ll match your setup with the right digga attachments.
WHY BUY DIGGA ATTACHMENTS FROM ESKIDSTEER.COM
Official Digga Partner
We’re a trusted source for authentic digga attachments, straight from the manufacturer. Every item is backed by full factory support and covered under warranty.
Expert Advice, No Guesswork
Our team knows these tools inside and out. Whether you're choosing a digga trencher or auger, we can walk you through torque specs, machine fit, and ground condition needs.
Complete Kits, Ready to Work
You won’t be chasing parts. Each setup includes the drive, hoses, mounts, and bits. Just bolt it on and get to work with a full digga augers system, pre-matched to your machine.
Transparent Pricing & Financing
What you see is what you pay. We also offer flexible financing so you can get the gear you need now without draining your budget.
Fast, Tracked Shipping
Your job can’t wait, and neither do we. Orders ship quickly with full tracking, so you always know where your digga attachments are and when they’ll arrive.
NEED HELP CHOOSING THE RIGHT DIGGA ATTACHMENT?
From torque specs to soil type, we’ve got you covered. Whether you're drilling, trenching, or mounting a drive head, our team can help you pick the right setup for your machine.
Contact Us →
FAQs
What size auger drive do I need for my skid steer?
It depends on your hydraulic flow and job type. For general dirt drilling, most standard-flow machines pair well with Digga’s PD series.
Are Digga augers compatible with other brands like Bobcat or CAT?
Yes. Digga attachments include universal mounts and hose options. We’ll help match the drive and bit setup to your machine’s specs.
How do I maintain a Digga auger drive?
Keep it greased, inspect bits, and store it dry. Digga auger drives are low-maintenance, but a quick check now and then saves downtime later.
What kind of teeth do I need for rocky ground?
Use bolt-on rock teeth or pilot points with wear protection. Let us know your soil type and we’ll guide you to the right digga auger bits.
Are Digga attachments covered by warranty?
Yes. All digga attachments we sell come with manufacturer-backed warranties. Coverage varies by model—ask us for details.`
CUSTOMER SUPPORT
If you need support, we’re here to help.
Mon-Fri: 8am-4:30pm CT
Sat-Sun: Closed
You can also email us for customer service or product support.
support@eskidsteer.com
Call or Text
To place a new order or for assistance with an existing order call or text us at
+1 (866) 757-8337
Live Chat
Have questions or need help?
Chat with us using the icon in the bottom left.
Start new chat
- Choosing a selection results in a full page refresh.