75mm
Drives 1DSS - 7DDT
100mm
Drives 9DDS - 30DDT
130mm
SD45 - SD95
Guaranteed Fit
Fast Shipping
Hassle-Free Returns
Description
Digga Auger Drive Mount Linkage
A secure connection between the auger drive and its mount starts with the correct linkage. This genuine Digga Auger Drive Mount Linkage is the pinned connector used to join those components, providing the interface needed to assemble a compatible auger setup. For replacement or installation work, matching the linkage to the drive is essential: linkage size is determined by the auger drive rather than by the skid steer or other carrier.
Match the linkage to the drive
Auger drives and mounts can use different linkage configurations. The required part is therefore not selected solely by machine make, model, or mounting plate. Confirm the auger drive model and the linkage specification it requires before ordering. A linkage that does not match the drive may not align with the intended pin connection, so verify the part against the drive documentation or existing linkage whenever possible.
This distinction matters when replacing worn, damaged, or missing connection hardware. A skid steer may remain unchanged while the auger drive determines which linkage fits. Selecting by drive helps avoid treating the carrier’s quick-attach interface as the deciding measurement and keeps the drive-to-mount connection aligned with the manufacturer’s configuration.
Role in an auger assembly
The linkage sits between an auger drive and its mount and is retained with pins. It forms a mechanical connection within the auger assembly; it is not itself an auger bit, hydraulic coupler, hose, or complete drive. Correct fit supports proper assembly of the components, while the drive, mount, pins, and carrier must each be compatible for the complete setup to function as intended.
For operators in construction, landscaping, and agriculture, this type of replacement part is relevant when maintaining an auger attachment used for drilling work. It provides a direct way to replace the connector without assuming that the whole auger drive or mount needs to be changed. Inspect the mating parts and pins during service, and confirm that the intended connection points are in suitable condition before reassembly.
Compatibility and selection checks
Before purchase, identify the Digga auger drive and establish the linkage it calls for. Compare the existing part, if available, and check any drive or mount identification information. Do not infer fit from the carrier alone: two machines with similar skid-steer mounting interfaces may use different auger drives, and those drives can require different linkages.
- Identify the drive: Use the model or part information for the auger drive as the starting point.
- Confirm the linkage: Check the specified linkage configuration and pin connection against the drive or the existing assembly.
- Check the mount: Verify that the mount is intended to work with the selected drive and linkage.
- Inspect the hardware: Confirm that pins and mating points are serviceable and suited to the assembly.
- Resolve uncertainty before assembly: Compare component identification and fit details rather than relying on the carrier model as the sole guide.
Installation and maintenance context
Installation involves positioning the linkage at the designated connection between the auger drive and mount, aligning the pin locations, and securing the assembly with the appropriate pins. Follow the manufacturer’s instructions for the specific drive and mount. The product information provided does not state dimensions, pin diameter, material, weight, included hardware, or a particular drive-model range; those details should be verified before relying on a measurement or assuming additional components are included.
During routine inspection, look for visible deformation, cracking, excessive wear, or damage around the linkage and pin locations. Check that the connection is correctly seated and retained before returning the auger to work. A replacement linkage should correspond to the drive’s required specification; it should not be modified to force a fit. If the existing configuration is unclear, use the drive’s parts information or confirm the required linkage before installation.
Part details
This item is listed as a genuine Digga part under SKU HI-000128K. It is categorized with skid steer augers and skid steer accessories, making it relevant to maintaining or configuring a compatible auger-drive assembly. The listed price is $117.99. Confirm current availability and the exact fitment for the auger drive before completing an order, as the supplied product information does not identify a universal fit or provide a machine-specific compatibility list.
Choosing the linkage by drive specification keeps the selection focused on the connection that must be made: auger drive to mount. For a replacement, match the original configuration where confirmed; for a new assembly, verify the linkage requirements of the drive and mount together. This practical check helps reduce incorrect-part selection and supports a properly assembled Digga auger setup.
Shipping
The following are estimated processing and delivery times. We make every effort to fulfill orders as quickly as possible.
We only deliver within the United States. If a package can’t be delivered due to an error entering your shipping address, Eskidsteer is not responsible for any additional fees that may incur to reroute or reship the package.
By placing an order through this Website you will be agreeing to the terms below. These are provided to ensure both parties are aware of and agree upon this arrangement to mutually protect and set expectations for our service. Please read our Terms of Service.
How do I place an order?
We do not take orders on the phone for security reasons. To place an order, go to a product page, select the desired quantity of the item, and add it to your cart via the “Add to Cart” button. During checkout, you just need to enter or confirm your shipping address and credit card information, then you can place your order
Shipping fee:
Delivery Time= Handling time +Transit Time:
Handling time: 3-3 Days
Transit time: 5-8Days
Order cut off Time: 5:00 PM (GMT-05:00) Eastern Standard Time (New York)
Which shipping carriers do you use to ship?
All Shipments are done with LTL Carriers, UPS, FedEx, DHL, and USPS
Failure to Accept Products on Delivery
If you reject delivery of goods ordered from us, or otherwise fail to accept delivery of the goods, you agree to pay for all related and additional shipping fees, duties, taxes, restocking fees and other charges arising from such failure to accept delivery. After such failure to accept delivery of the goods, it shall be your responsibility to pay for and arrange a new shipping date.
Tracking Information:
We also provide tracking numbers for all orders. Once your order has been shipped, we will provide you with a tracking number that you can use to track the progress of your package. You will receive this tracking number via email.
We understand the importance of knowing the status of your order, and we strive to provide you with transparent and reliable tracking information. If you have any questions or need assistance with tracking your order, please don’t hesitate to contact our customer support team. We’re here to help!.
Can I ship to multiple addresses?
At this time, we cannot ship to multiple addresses in one order. Please place separate orders on support@eSkidsteer.com to ship to different addresses. If you need assistance, please contact our Customer Service.
Wrong Address:
Please review and ensure that you have entered the correct address. We are not responsible for non-delivery due to errors in the address that you provide. If an order is returned due to an incorrect address, we will refund the original order (excluding the shipping fee) and ask that you re-submit your order.
Change of Address:
If your item hasn’t yet been shipped, you may change your delivery address by emailing at support@eSkidsteer.com. Please note that we are not obligated to ensure changes to the delivery address after the item has been delivered.
If you have any questions or require further assistance regarding the shipping policy, please do not hesitate to contact our customer support team.
Phone: +1 8667578337
Email: support@eSkidsteer.com
Address: 30 North Gould St Suite R, Sheridan, WY 82801, USA
Returns
Returns
We offer returns and exchanges in limited circumstances as follows:
- In order to submit a return, you must contact us by email at support@eSkidsteer.com for us to confirm the items ordered are eligible for return or exchange;
- To be eligible for a return, you must commence the return process within 30 days of your item being delivered to you and:
- it must be unused, for example, once an item is hooked up to an attachment plate, hydraulic lines or electrical connection, it will not be eligible for return. Likewise, if your item shows any sign of use, which we may determine in our sole and absolute discretion, we will not accept the return;
- it must be in the same condition you received it in. You will be required to send us timestamped photos of the condition of your items as a condition to determine your eligibility for the return or exchange; and
- it must be returned in the same packaging or containers as it was received in.
We do not accept returns for products that were listed as final sale items at the time of purchase.
You agree to pay a 25% restocking fee on all returns, which we will deduct from any refund owing to you.
After the above referenced 30-day period, unfortunately we cannot offer you a refund or exchange, under any circumstances.
If your return or exchange is approved, we will provide instructions on shipping your items back to us or the applicable supplier via email.
You agree that you shall be responsible for all return shipping costs and related expenses.
Our shipping cost to you is not refundable.
You are also responsible for ensuring the items are carefully packaged for shipment and that risk of loss or damage during return shipping shall be your sole liability. You may wish to obtain insurance while the returned items are in transit.
Lost or Damaged
If the item is damaged when you receive it, do not sign the proof of delivery, and contact us immediately at support@eSkidsteer.com. If you sign the proof of delivery form, you cannot later claim the item was lost (i.e. not delivered) or damaged on arrival.
If the item is damaged on arrival take photos of the damage with a time stamp.
In the event the item is lost or damaged on arrival, we will assist you with filing a reimbursement claim directly with the applicable supplier or shipping company as applicable. However, you agree that as we are not the direct supplier of the items, it shall be your responsibility to pursue any claims with the applicable supplier in the event your lost or damaged item is not replaced by the supplier or carrier.
No Warranties Offered by Us
Everything on the Website, including all products available for order, are provided "as is" without warranty of any kind from us, including all implied warranties and conditions of merchantability and fitness for a particular purpose. We hereby disclaim all warranties and conditions of any kind, whether express, implied or statutory.
You acknowledge that we do not manufacture the products made for sale on the Website and that such products and the individual components thereof, are made by third party manufacturers.
Warranties Offered by Third Parties
Our third party suppliers and manufacturers may offer limited warranties on certain products sold on the Website. You may contact us and we can refer you to the applicable supplier or manufacturer if you wish to inquire about the details of any such warranties offered by those third parties. You agree that we shall not be liable or responsible for any warranties granted by such third parties.
To the extent products you order from us have warranties provided by a third party supplier or manufacturer, upon your request we agree to reasonably assist with the submission of warranty claims to such third parties. However, we make no guarantees that any warranty claims will be successful. You agree it is your responsibility to ensure warranty claims are submitted within the applicable timeframe to the applicable supplier or manufacturer.
- Choosing a selection results in a full page refresh.