-
$355.00 Off
$3,548.99 List Price:
$3,903.99🏆Engineer certified 📋Meets ANSI/OSHA 📐Fits existing fork tines 📘 Overview The Haugen galvanized work platform (MWPG) is the same fork-mounted telehandler work platform as the standard MWP, hot-dip galvanized after fabrication so it does not rust. Four sizes from 4x4 to 4x9'8", all rated... -
$3.00 Off
$22.99 List Price:
$25.99Komatsu Mirror for Crawlers and Wheel Loaders | Depco When a damaged or missing mirror limits the operator’s view, replacing it with a part matched to the existing equipment helps return the machine to its working setup. This Depco aftermarket Komatsu mirror is a... -
$582.00 Off
$5,816.99 List Price:
$6,398.99🏭Made in USA since 1981 🔒5-year factory guarantee 🔨3/16 in steel plate, channel reinforced 📘 Overview A Star Industries crane trash skip removes tear-off and construction refuse from roofs and decks without the waste coming down by hand. It is hoisted on a set... -
$63.00 Off
$414.99 List Price:
$477.99🏭Made in USA 📘 Overview A Bobcat wiring harness for the single-pole 7-pin connector. The EZ Spot UR Single Pole 7 Pin Bobcat Electrical Harness (SSG-SG-CB-1000) connects an EZ Spot UR hydraulic function attachment to Bobcat machines fitted with a single-pole 7-pin electrical connector.... -
$420.00 Off
$4,199.99 List Price:
$4,619.99📐Fits existing fork tines 🧰Hoses and couplers included 📘 Overview The Haugen forklift concrete hopper (HCH) is a fork-mounted concrete placement bucket for telehandlers and rough terrain forklifts, for pouring forms a ready-mix truck cannot reach. Two capacities, 1 and 1-1/4 cubic yards, each... -
$3,398.99
📐Fits existing fork tines 🛠Machine-specific mount 📏Multiple sizes available 📘 Overview The Haugen telehandler truss jib (MTJ) is a truss boom attachment with a quick attach mount CNC machined to your specific telehandler make, model and year. Lengths run from 2 to 15 feet,... -
$390.00 Off
$3,898.99 List Price:
$4,288.99🏆Engineer certified 📋Meets ANSI/OSHA 📐Fits existing fork tines 📘 Overview The Haugen fork mounted spreader bar for lifting (MASPR) is an adjustable lifting spreader bar that slips onto your fork tines and turns a telehandler or forklift into a two-point lifting rig. Three length... -
$7.00 Off
$63.99 List Price:
$70.99🔎OEM interchange 🏭Aftermarket 📘 Overview John Deere wheel loader mirror — this rear view mirror john deere operators fit across four machine families replaces OEM part AT157226, the rectangular rear-view mirror head used across John Deere backhoe loaders, wheel loaders, motor graders and articulated... -
$335.00 Off
$3,347.99 List Price:
$3,682.99📘 Overview The Blue Diamond Safe Work Platform is a forklift work platform that attaches to a telehandler or forklift to safely lift personnel for elevated work. It slides onto the forks and locks in place with fork pins, providing a stable, guarded deck... -
$252.00 Off
$2,522.99 List Price:
$2,774.99🏭Made in USA since 1981 🔒1-year warranty 🔨1/4 in and 3/16 in steel plate 📘 Overview A Star Industries self dumping hopper collects, moves and discharges waste around a site without anyone handling the load. It slips onto the forks of a straight-mast or... -
$148.00 Off
$1,486.99 List Price:
$1,634.99🏭Made in USA since 1981 🔒5-year factory guarantee 🚧Built-in 84 in mast screen 📘 Overview The Star Industries 1244B industrial work platform elevates personnel with a straight-mast warehouse forklift — safer and faster than a ladder, and cheaper than the time a scaffold takes... -
$43.00 Off
$420.99 List Price:
$463.99🏭Made in USA since 1981 🔒5-year factory guarantee 🔨Reversible — two edges per blade 📘 Overview A Star Industries bolt on cutting edge protects the leading edge of a bucket and extends its life around three times. The blade is 5/8 inch by 8... -
$460.00 Off
$4,599.99 List Price:
$5,059.99📐Fits existing fork tines 📘 Overview The Haugen telescoping forklift jib that also pivots (MIJ-A) is a fork-mounted forklift jib boom adjusting from 4 to 12 feet with eight positions, and pivoting from vertical through to a 35-degree angle. Rated 2,050 lbs at 12... -
$6.00 Off
$35.99 List Price:
$41.99🏭Made in USA 📘 Overview The EZ Spot UR Intermediate Tool Wiring Harness (P-EZ-TWH-102) is the tool-side lead in an EZ Spot UR installation — it runs between the machine harness and the attachment rather than plugging into the machine itself. It integrates with... -
$33.00 Off
$326.99 List Price:
$359.99🔎OEM interchange 🔧Pre-drilled 📘 Overview JCB glass replacement for the Loadall telehandler — this jcb front cab glass replaces OEM part 827/80225 — the front screen on the JCB Loadall 528 through 540 Series 2 telehandlers and the Wastemaster 560.8. The pane measures 41"... -
$163.00 Off
$1,626.99 List Price:
$1,789.99📐Fits existing fork tines 📘 Overview The Haugen forklift loading platform Haugen calls the "Renters Helper" (MLB 48) is a 48" x 48" fork-mounted platform with a built-in ramp for loading rolling equipment into pickup beds. Rated 1,000 lbs, with a safety bar to... -
$130.00 Off
$1,296.99 List Price:
$1,426.99🏆Engineer certified 📋Meets ANSI/OSHA ⚙No hydraulics required 📘 Overview The Haugen fork mounted swivel hook (MFSH) is a forklift lifting hook that slips onto your existing tines and turns a fork carriage into a lifting point, with no coupler change and no hydraulics. Five... -
$210.00 Off
$2,097.99 List Price:
$2,307.99🏆Engineer certified 📋Meets ANSI/OSHA 📐Fits existing fork tines 📘 Overview The Haugen forklift hook attachment (Premium Swivel Hook) is a wide 42" frame forklift lifting hook, rated at 8,800, 10,000 or 14,000 lbs. Feet on the underside hold the hook clear of the ground... -
$351.00 Off
$3,502.99 List Price:
$3,853.99Put existing fork tines to work clearing snow When snow covers access lanes, yards, and jobsite surfaces, a fork-mounted blade gives your telehandler or tractor a practical way to move it. The Haugen Fork Mounted Snow Blade, model HFSB-60, slips onto existing fork tines,... -
$400.00 Off
$3,998.99 List Price:
$4,398.99🔧Replaceable wear parts 📐Fits existing fork tines 🛠Machine-specific mount 📘 Overview The Haugen quick attach telehandler bucket (MDBT) is a telehandler dirt bucket for general purpose loading that mounts directly to your telehandler's carriage rather than sitting on the forks. Four widths from 60"...
SHOP TELEHANDLER BY TYPE
CHOOSING THE RIGHT TELEHANDLER ATTACHMENT
Define Your Primary Purpose
Start by identifying the task. For lifting, use buckets or bale handlers. For overhead jobs, go with truss jibs or spreader bars. For precision, choose swivel hooks or platforms.
Match to Your Telehandler's Specs
Make sure your attachment fits your telehandler's lift limits and coupler type. Some accessories, like work platforms or long jibs, need specific ratings to stay safe.
Prioritize Build Quality and Materials
Choose attachments made with reinforced steel and clean welds. Stick with trusted names like Haugen Attachments, Star Industries, and Top Dog.
Think About Long-Term Versatility
Look for attachments that serve more than one purpose. A swivel hook, for example, can move beams today and lift machinery tomorrow.
WHY BUY TELEHANDLER FROM SKIDSTEER
Built on Industry Knowledge
With years in the field, our team speaks your language. We help you pick the right telehandler equipment, not just based on specs, but on what actually works on the job.
Performance Proven Parts
Every item in our catalog has passed real-world stress tests. From telehandler buckets to precision attachments, we offer only gear we’d trust on our own worksite.
Honest Pricing, No Games
You get the full picture up front. No surprise fees or complex bundles. Our pricing reflects the value of well-built telehandler accessories, backed by support, not guesswork.
Fast, Reliable Delivery
Your job site has no time for delays. We ship telehandler attachments quickly and keep you updated every step of the way across the U.S. and Canada.
Support That Actually Helps
Our experts don’t read from a script. Whether you're unsure about fit, application, or upgrades, we guide you with clear, practical answers.
NEED HELP CHOOSING THE RIGHT TELEHANDLER ATTACHMENT?
Not sure which attachment fits your machine or job site needs? Our experts are here to guide you, no guesswork, just solid advice based on years of hands-on experience.
Contact Us →
FAQs
Are telehandler attachments universal?
Not all telehandler attachments are universal. Compatibility depends on your machine’s coupler system, weight limits, and hydraulic setup.
Can all telehandlers use the same attachments?
Some attachments are brand-specific, while others fit multiple models. Always check size, mounting plate style, and lifting capacity before purchase.
How do I know if a telehandler attachment will fit my machine?
Review your telehandler model’s specifications and match them to the attachment’s coupler type, dimensions, and load rating.
How do I maintain my telehandler attachments?
Inspect for worn pins, cracked welds, or rust. Lubricate joints regularly and store attachments in dry conditions to extend their lifespan.
How long do telehandler attachments usually last?
With proper care and use, most high-quality telehandler attachments last for several years—even under demanding job site conditions.
CUSTOMER SUPPORT
If you need support, we’re here to help.
Mon-Fri: 8am-4:30pm CT
Sat-Sun: Closed
You can also email us for customer service or product support.
support@eskidsteer.com
Call or Text
To place a new order or for assistance with an existing order call or text us at
+1 (866) 757-8337
Live Chat
Have questions or need help?
Chat with us using the icon in the bottom left.
Start new chat
- Choosing a selection results in a full page refresh.