Telehandler Industrial Smart Hook Ready Swivel Hook Attachment - Haugen Attachments

📘 Overview

The Haugen Premium Swivel Hook is a fork mounted lifting hook attachment for telehandlers and forklifts rated at 10,000 lbs (M10) or 14,000 lbs (M14), weighing 215 lbs and 225 lbs respectively — and it is the only swivel hook in the Haugen lineup built Smart Hook Ready. The 42" wide frame slides onto fork tines via standard 3-1/2" x 7-1/2" pockets and is held centered at a 24" load center with safety pins. When the optional Haugen Smart Hook technology is added, the swivel hook sends wireless load weight readings to a handheld monitor, tablet, or phone — updating every 3 seconds in lbs or tonnes. Meets and exceeds OSHA requirements. Powder coated throughout for rust and corrosion resistance. Made in the USA with a 1-year warranty.

⚙️ Key Features

• Smart Hook Ready — pre-configured for the Haugen Smart Hook wireless load monitoring system; standard swivel hook models are NOT Smart Hook Ready, this Premium version is.
• Available in 10,000 lbs (M10, 215 lbs) and 14,000 lbs (M14, 225 lbs) — two capacity options for different machine and load requirements.
• 42" wide frame — wider than the standard MFSH series for improved stability on heavier loads.
• 24" load center on center — hook positioned at industry-standard 24" center for predictable load behavior.
• Standard fork pockets 3-1/2" x 7-1/2" — fits standard telehandler fork tines; safety pins secure attachment to forks.
• Feet to keep hook off the ground — prevents hook damage when setting down on job site surfaces.
• Meets and exceeds OSHA requirements
• Powder coated | Made in USA | 1-year warranty

🔑 Benefits

• Smart Hook Ready gives operators real-time load weight — the only MFSH-style hook with this capability — knowing exact load weight every 3 seconds prevents overloading the jib or machine, which is critical on job sites where rigging multiple loads of varying weight throughout a shift.
• 42" wider frame vs standard MFSH improves stability on heavy loads — the wider frame geometry provides better balance for loads at or near rated capacity compared to the standard swivel hook frame.
• 14,000 lb M14 capacity covers the large majority of telehandler lifting applications — 7-ton rated capacity handles structural steel members, precast sections, and heavy equipment components without needing the high-capacity MFSH-30 series.
• Powder coat protects against job-site corrosion — full powder coat throughout the frame and hook components resists rust and corrosion in outdoor and wet environments.

📊 Specifications

🔗 Attachment Compatibility

The Haugen M10/M14 Premium Swivel Hook uses a fork slot mounting system — slides onto fork tines via standard 3-1/2" x 7-1/2" fork pockets and is secured with safety pins. Custom fork pocket sizes are available on request. The Smart Hook wireless load monitoring system is an optional add-on; contact Haugen or a dealer for Smart Hook configurations.

🚜 Machine Compatibility

Designed for telehandlers, rough terrain forklifts, and standard forklifts with fork carriage. Standard fork pocket size 3-1/2" x 7-1/2". Compatible with:

Compatibility is determined by fork pocket size and host machine capacity, not brand — verify your machine's rated capacity before use. Never exceed the capacity of the attachment or the host machine.

❓ FAQs