-
$855.00 Off
$8,548.99 List Price:
$9,403.99Bradco / Paladin built 30", 36" and 42" digging depth 18–45 GPM Overview This Bradco skid steer trencher — the 640 Series — digs to 30", 36" and 42" on a skid steer quick attach, running on 18–45 GPM. Chain widths of 6", 8",... -
$106.00 Off
$5,194.99 List Price:
$5,300.995-yr gearbox warranty 3-yr motor warranty Lifetime shaft pull-out cover Overview This 6DDS excavator auger attachment carries 4,911 ft-lbs at 3,000 PSI and reaches 30 inches in clay and shale, the specification that usually decides whether a hole gets drilled in stiff ground. It... -
$106.00 Off
$5,194.99 List Price:
$5,300.995-yr gearbox warranty 3-yr motor warranty Lifetime shaft pull-out cover Overview A 6DDS high flow skid steer auger attachment gives 4,911 ft-lbs at 3,000 PSI and lifts the clay and shale limit to 30 inches, a quarter more torque than the 5DDS for around... -
$181.00 Off
$8,839.99 List Price:
$9,020.995-yr gearbox warranty 3-yr motor warranty Lifetime shaft pull-out cover Overview At 5,013 ft-lbs with a 30 inch limit in clay and shale, this 6DDT excavator auger attachment is the middle of Digga's two-speed range for 4.5 to 8 tonne machines. It is sold... -
$181.00 Off
$8,839.99 List Price:
$9,020.995-yr gearbox warranty 3-yr motor warranty Lifetime shaft pull-out cover Overview With 5,013 ft-lbs and a 30 inch ceiling in clay, the 6DDT two-speed high flow skid steer auger attachment sits in the middle of Digga's shifting range and costs about thirty dollars more... -
$6.00 Off
$35.99 List Price:
$41.99🏭Made in USA 📘 Overview An intermediate wiring harness in the 7-pin arrangement. The EZ Spot UR 7 Pin Intermediate Tool Electrical Harness (P-EZ-TWH-007-89) is the tool-side lead in an EZ Spot UR installation — it runs between the machine harness and the attachment... -
$1,265.20 Off
$12,651.99 List Price:
$13,917.1972" and 90" working width 17-30 GPM 25° slew both ways Tungsten carbide teeth Overview The Digga Power Rake is the full-size soil conditioner for skid steers and small wheel loaders: a hydraulically driven, bi-directional drum that cuts, levels and windrows in a single... -
$312.00 Off
$3,115.99 List Price:
$3,427.99🏭USA 🔧Quick attach 📘 Overview This skid steer grapple bucket — the Top Dog 72" Utility Grapple — is the light-duty model in the range, recommended for loaders up to 2,000 lbs total lift capacity, which is the specification that should decide whether this... -
$307.00 Off
$3,068.99 List Price:
$3,375.99Bradco / Paladin built 78" working width Staggered grate design Overview This Bradco skid steer land plane — the Land Sculptor — levels and shapes ground in a 78" working width. It is available bare at 515 lbs or with comb and scarifier at... -
$107.00 Off
$5,233.99 List Price:
$5,340.995-yr gearbox warranty 3-yr motor warranty Lifetime shaft pull-out cover Overview With 6,164 ft-lbs and a 48 inch ceiling in earth, this 7DDS excavator auger attachment is the largest single-speed drive Digga offers for 4.5 to 8 tonne excavators and backhoes. It is sold... -
$107.00 Off
$5,233.99 List Price:
$5,340.995-yr gearbox warranty 3-yr motor warranty Lifetime shaft pull-out cover Overview At 6,164 ft-lbs the 7DDS is the most torque Digga puts in a single-speed high flow skid steer auger attachment, and the only one in the range that drills to 48 inches in... -
$182.00 Off
$8,888.99 List Price:
$9,070.995-yr gearbox warranty 3-yr motor warranty Lifetime shaft pull-out cover Overview This 7DDT excavator auger attachment is the biggest drive Digga builds for the 4.5 to 8 tonne class: 6,308 ft-lbs, 48 inches in earth, and a two-speed shift. It is sold here with... -
$182.00 Off
$8,888.99 List Price:
$9,070.995-yr gearbox warranty 3-yr motor warranty Lifetime shaft pull-out cover Overview The 7DDT is the largest two-speed high flow skid steer auger attachment Digga builds on a 2.5 inch hex shaft: 6,308 ft-lbs, 48 inches in earth, and the shift that makes large-diameter production... -
$104.00 Off
$1,037.99 List Price:
$1,141.99CP Coupler interface 140 lbs Overview This Paladin excavator hydraulic quick coupler is the interface between your excavator and everything it carries. A coupler is a standard, not an accessory: get the class right and every attachment cut for it mounts; get it wrong... -
$452.80 Off
$4,527.99 List Price:
$4,980.79Digga 84" Skid Steer Root Rake Clear a broad path through roots, brush, and loose rock with the Digga 84-inch skid steer root rake. Its full-width working profile is designed to comb unwanted material from soil during land clearing and site preparation, helping leave... -
$140.00 Off
$6,860.99 List Price:
$7,000.995-yr gearbox warranty 3-yr motor warranty Lifetime shaft pull-out cover Overview This 9DDS excavator auger attachment is the entry point to Digga's 9 to 12 tonne range and the drive most 20,000 lb machines end up on: 7,761 ft-lbs at 3,000 PSI, a 2.5... -
$1.00 Off
$41.99 List Price:
$42.99Made in USA Direct fit Overview This square-drive auger pilot is the PM-SQ-1 for Digga A4 earth auger bits — the point at the centre of the head that enters the ground first and holds the auger where you set it. Digga moved this... -
$10.00 Off
$485.99 List Price:
$495.99Genuine Digga auger bit Includes pin, clip, teeth and pilot Overview The Digga A4 is a general purpose skid steer auger bits for earth and clay, cut with bladed teeth and available with multi-faced tungsten where the ground turns hard. It runs a 2... -
$1.00 Off
$5.99 List Price:
$6.99Made in USA Direct fit Overview The TS-C-1 is the inner auger teeth position on Digga A4 earth auger bits — the teeth working closest to the pilot, in the inner pockets of the cutting head. They see less travel per revolution than the... -
$1.00 Off
$5.99 List Price:
$6.99Made in USA Direct fit Overview Digga TS-1 auger teeth are the outer replacement teeth for A4 earth auger bits — the bladed steel tooth that sits in the outer pockets of the cutting head and does the widest cutting work, wearing fastest as...












