-
$0.10 Off
$0.99 List Price:
$1.09A4 Truloc Single Pin – Digga A secure tooth starts with the correct retaining pin. The Digga A4 Truloc Single Pin (part number WP-000271) locks a compatible tooth into a Digga A4 auger bit, helping keep the cutting component retained during auger operation. This... -
$3.00 Off
$137.99 List Price:
$140.99Made in USA Direct fit Overview This tungsten auger pilot is the PM-SQ-3 from Digga’s A4 Heavy Conditions set — the same square drive as the steel PM-SQ-1, with tungsten on the cutting point. It is the pilot supplied on Heavy Conditions A4 bits... -
$18.99
Made in USA Direct fit Overview These tungsten auger teeth are the TS-C-3, the multi-faced inner tooth for Digga A4 bits — the same pocket and the same profile as the steel TS-C-1, with tungsten brazed onto the cutting face. That brazing is the... -
$1.00 Off
$32.99 List Price:
$33.99Made in USA Direct fit Overview Of the auger teeth on a Digga A4 cutting head, the TS-3 outer tooth is the one that wears fastest. The outer position travels the largest circumference per revolution, so it covers more ground and more material than... -
$0.70 Off
$6.99 List Price:
$7.69Digga TM-C-1 Inner Auger Tooth for A6 and A8 Bits A worn tooth can affect how an auger bit engages the ground. The Digga TM-C-1 inner auger tooth is a genuine Digga wear part for the inner tooth position on compatible A6 and A8... -
$0.90 Off
$8.99 List Price:
$9.89Digga TM-1 Outer Auger Tooth for A6 / A8 Auger Bits A worn outer tooth can reduce an auger bit’s ability to cut cleanly through soil. The genuine Digga TM-1 is an earth-cutting outer tooth for Digga A6 and A8 auger bits, providing a... -
$1.90 Off
$18.99 List Price:
$20.89Digga TM-C-3 Tungsten Inner Auger Tooth for A6 and A8 Bits A worn inner tooth can reduce an auger bit’s ability to cut consistently. The Digga TM-C-3 is a genuine tungsten inner auger tooth for compatible Digga A6 and A8 auger bits, providing a... -
$3.30 Off
$32.99 List Price:
$36.29Genuine Digga TM-3 PADLOC knock-in, knock-out Overview This tungsten outer auger tooth is the carbide auger teeth replacement for the outer pockets of Digga A6 earth auger bits and A8 earth auger bits in their MFT, hard ground, versions. Each tooth carries multi-faced tungsten... -
$25.00 Off
$1,185.99 List Price:
$1,210.99Genuine Digga auger bit Includes pin, clip, teeth and pilot Overview The Digga A8 is a general purpose heavy duty auger bit for earth and clay, cut with bladed teeth and available with multi-faced tungsten where the ground turns hard. It runs a 2.5... -
$0.40 Off
$3.99 List Price:
$4.39Digga AB4 Auger Tooth Bolt — DP-40/50CB A loose, worn, or missing tooth bolt can keep an auger bit from being ready for work. The Digga DP-40/50CB is a genuine Digga wear part used to hold a bolt-on tooth onto a compatible Digga AB4... -
$0.10 Off
$0.99 List Price:
$1.09Digga AB4 Auger Tooth Nut – DP-40/50N A bolt-on auger tooth depends on secure fastening to stay in position during digging. The Digga AB4 Auger Tooth Nut, part number DP-40/50N, is the replacement nut used to secure a tooth bolt on a compatible Digga... -
$0.60 Off
$5.99 List Price:
$6.59Digga AB4 Bolt-On Auger Tooth — DP-40/50 Restore the digging edge of a compatible Digga AB4 auger bit with the DP-40/50 bolt-on auger tooth. This genuine Digga wear part is designed for the AB4 bit and sold individually, providing a direct replacement when a... -
$1.00 Off
$9.99 List Price:
$10.99Digga AB4 Hard Faced Bolt-On Auger Tooth A worn auger tooth can compromise the cutting edge of a bit and interrupt digging work. The Digga AB4 Hard Faced Bolt-On Auger Tooth (part number DP-40/50HFF) is a genuine Digga wear part designed for Digga AB4... -
$2.50 Off
$24.99 List Price:
$27.49Digga DP-40/50C Tungsten Carbide Bolt-On Auger Tooth Maintain the cutting end of a compatible Digga AB4 auger bit with the DP-40/50C tungsten carbide bolt-on tooth. This genuine Digga wear part is designed for AB4 bits and replaces an individual worn or damaged tooth, helping... -
$485.00 Off
$3,229.99 List Price:
$3,714.99🔒1-year warranty 🔩Hardox 450 edge 📘 Overview The skid steer grading bucket from Skeer sets its own cutting height, and the choice you make is width: 72", 78", 80" or 84". All four run on a machine of 40 HP or more, so this... -
$44.00 Off
$438.99 List Price:
$482.99Pengo by Paladin Double flight, 5/16" thick 2" hex or 2 9/16" round Overview This Pengo skid steer auger bit — the Aggressor Earth Auger — is the professional-grade auger in the Pengo range, built for daily and constant use. Twenty-six configurations cover 6"... -
$105.01 Off
$6,214.99 List Price:
$6,320.00🏭Made in USA — Colville, WA 🔒2-year attachment warranty ⏳3-year cylinder warranty 🔧Greaseable pivot points 📘 Overview The ANBO GR120-6 is a root grapple built for tractors, skid steers, compact track loaders and wheel loaders up to 120 horsepower, supplied in 6 widths from... -
$96.01 Off
$5,703.99 List Price:
$5,800.00🏭Made in USA — Colville, WA 🔒2-year attachment warranty ⏳3-year cylinder warranty 🔧Greaseable pivot points 📘 Overview The ANBO GR120-8 is a skid steer brush grapple built for tractors, skid steers, compact track loaders and wheel loaders up to 120 horsepower, supplied in 5... -
$111.01 Off
$6,588.99 List Price:
$6,700.00🏭Made in USA — Colville, WA 🔒2-year attachment warranty ⏳3-year cylinder warranty 🔧Greaseable pivot points 📘 Overview The ANBO GR120HC-6 is a heavy duty root grapple built for tractors, skid steers, compact track loaders and wheel loaders up to 120 horsepower, supplied in 6... -
$103.01 Off
$6,096.99 List Price:
$6,200.00🏭Made in USA — Colville, WA 🔒2-year attachment warranty ⏳3-year cylinder warranty 🔧Greaseable pivot points 📘 Overview The ANBO GR120HC-8 is a root rake grapple built for tractors, skid steers, compact track loaders and wheel loaders up to 120 horsepower, supplied in 5 widths...

















