-
$1.00 Off
$32.99 List Price:
$33.99Made in USA Direct fit Overview Of the auger teeth on a Digga A4 cutting head, the TS-3 outer tooth is the one that wears fastest. The outer position travels the largest circumference per revolution, so it covers more ground and more material than... -
$9.00 Off
$396.99 List Price:
$405.99Digga 2-Inch Hex Outer Auger Extension When a hole must reach below the effective length of the auger bit, a compatible extension adds working reach between the drive and the bit. This Digga auger extension is identified as a 2-inch hex outer model, providing... -
$18.99
Made in USA Direct fit Overview These tungsten auger teeth are the TS-C-3, the multi-faced inner tooth for Digga A4 bits — the same pocket and the same profile as the steel TS-C-1, with tungsten brazed onto the cutting face. That brazing is the... -
$3.00 Off
$137.99 List Price:
$140.99Made in USA Direct fit Overview This tungsten auger pilot is the PM-SQ-3 from Digga’s A4 Heavy Conditions set — the same square drive as the steel PM-SQ-1, with tungsten on the cutting point. It is the pilot supplied on Heavy Conditions A4 bits... -
$8.00 Off
$362.99 List Price:
$370.99Digga Auger Adapters for Different Output Shafts An auger bit and drive need compatible connection points to work together. Digga auger adapters provide a practical way to bridge a difference in output shaft, including transitions between hex and round hubs. For skid steer auger... -
$18.00 Off
$852.99 List Price:
$870.99Genuine Digga auger bit Includes pin, clip, teeth and pilot Overview The Digga RC4 is a taper tooth auger bit for skid steer — one bit for earth, clay and fracturable rock, rather than two bits for two jobs. It runs a 2 inch... -
$1.00 Off
$41.99 List Price:
$42.99Made in USA Direct fit Overview This square-drive auger pilot is the PM-SQ-1 for Digga A4 earth auger bits — the point at the centre of the head that enters the ground first and holds the auger where you set it. Digga moved this... -
$21.00 Off
$1,029.99 List Price:
$1,050.99Genuine Digga auger bit Includes pin, clip, teeth and pilot Overview The Digga RC6 is a taper tooth rock and earth combo auger bit — one bit for earth, clay and fracturable rock, rather than two bits for two jobs. It runs a 2.5... -
$54.00 Off
$2,606.99 List Price:
$2,660.995-yr gearbox warranty 3-yr motor warranty Lifetime shaft pull-out cover Overview This 3DSS mini excavator auger attachment suits mini excavators and backhoes up to 11,000 lbs (up to 5T). It brings 2,829 ft-lbs at 3,000 PSI on a 2 inch hex shaft, and comes... -
$25.00 Off
$1,205.99 List Price:
$1,230.99Genuine Digga auger bit Includes pin, clip, teeth and pilot Overview The Digga DR6 is a dedicated rock auger fitted with rotating carbide picks, built for fracturable rock, shale and permafrost rather than for soil. It runs a 2.5 inch hex hub, with a... -
$15.99
Made in USA Direct fit Overview These auger teeth are the DP-00C3SR rotating carbide bullet picks used on Digga DR6 dedicated rock augers, and they work on a different principle from every other tooth in the range. Fixed teeth wear on one face until... -
$10.00 Off
$485.99 List Price:
$495.99Genuine Digga auger bit Includes pin, clip, teeth and pilot Overview The Digga A4 is a general purpose skid steer auger bits for earth and clay, cut with bladed teeth and available with multi-faced tungsten where the ground turns hard. It runs a 2... -
$3.00 Off
$117.99 List Price:
$120.99Digga Auger Drive Mount Linkage A secure connection between the auger drive and its mount starts with the correct linkage. This genuine Digga Auger Drive Mount Linkage is the pinned connector used to join those components, providing the interface needed to assemble a compatible... -
$1.00 Off
$27.99 List Price:
$28.99Made in USA Direct fit Overview The TTD-3 is the double-tungsten outer auger teeth position on Digga RC4 combination bits, and the “double” is the point: two tungsten faces rather than one, fitted to the outer positions where an RC4 does its widest and... -
$27.00 Off
$1,313.99 List Price:
$1,340.99Digga Skid Steer Pallet Fork Move palletized materials with a fork carriage designed to follow the load. The Digga skid steer pallet fork combines a floating fork design with a universal quick attach frame, giving operators a practical attachment for handling supplies around construction... -
$1.00 Off
$5.99 List Price:
$6.99Made in USA Direct fit Overview Digga TS-1 auger teeth are the outer replacement teeth for A4 earth auger bits — the bladed steel tooth that sits in the outer pockets of the cutting head and does the widest cutting work, wearing fastest as... -
$16.00 Off
$739.99 List Price:
$755.99Excavator Double Pin Mount for Auger Drives – Digga Keep a compatible auger drive supported at both dipper pins and let the excavator boom set the drilling angle. The Digga Excavator Double Pin Mount connects the drive to the excavator’s two-pin mounting point, rather... -
$1.00 Off
$19.99 List Price:
$20.99Made in USA Direct fit Overview The TTS-3 is the single-tungsten inner auger teeth position on Digga RC4 combination bits. Where the outer TTD-3 carries two tungsten faces for wear, the inner tooth carries one — because the inner position is asked for breakout... -
$3.00 Off
$147.99 List Price:
$150.99Made in USA Direct fit Overview This hex-drive auger pilot is the PM-HX-3 for Digga RC4 combination bits, and it is worth noting that it is a hex rather than the square drive used on the A4 range — the two are not interchangeable... -
$100.00 Off
$4,870.99 List Price:
$4,970.993-yr gearbox warranty 2-yr motor warranty Headstart crumber system Overview The Bigfoot mini skid steer trencher puts a 3 foot trench behind a compact utility loader. It runs a 1-5/8 inch pitch chain from 10 to 25 GPM, cuts 4, 6 or 8 inches...
- Attachments
- Attachments
- Go to Attachments
-
Skid Steer Attachments
- Skid Steer Attachments
- Go to Skid Steer Attachments
- 3-Point Adapters
- Augers
- Bale Spears
- Beach Cleaners
- Booms
- Brooms
- Buckets
- Concrete Mixers
- Concrete Breakers
- Concrete Claws
- Concrete Crushers
- Concrete Dispensers
- Dozer Blades
- Fence Installers
- Forestry Mulchers
- Graders
- Grapples
- Hay Grapples
- Hoppers
- Mowers And Brush Cutters
- Pallet Forks
- Plate Compactors
- Post Drivers
- Power Rakes
- Sand Baggers
- Snow Blowers
- Snow Plows
- Snow Pushers
- Steel Shears
- Tillers
- Tree Shears
- Tree Spades
- Trenchers
- Vibratory Rollers
- Excavator Attachments
- Mini Skid Steer Attachments
-
Telehandler Attachments
- Telehandler Attachments
- Go to Telehandler Attachments
- Spreader Bars
- Swivel Hooks
- Truss Jibs
- Work Platforms
- Buckets
- Bale Handlers
- Accessories
- Accessories
- Go to Accessories
- Skid Steer Accessories
-
Excavator Accessories
- Excavator Accessories
- Go to Excavator Accessories
- Adapters
- Attachment Parts
- Attachment Parts
- Go to Attachment Parts
-
Skid Steer/Excavator Attachment Parts
- Skid Steer/Excavator Attachment Parts
- Go to Skid Steer/Excavator Attachment Parts
- Auger Parts
- Grapples Parts
- Shop By Brands
- Shop By Brands
- Go to Shop By Brands
- Amulet
- Anbo
- Bradco
- Cardinal Canvas Products
- Depco
- Digga
- Equipment Lock
- EZ SPOT UR
- FFC
- Haugen Attachments
- Ideal Rockaway
- Maxx Attachments
- McLaren Industries
- Paladin Heavy
- Pengo Attachments
- Quality Chain
- Roadrunner
- Shields
- Skeer
- Skid Steer Genius
- Stanley
- Star Industries
- Strike Force
- The Silt Fence Plow
- Top Dog Attachments
- Ventures Equipment
- WAIN ROY
- Blog
- About Us
- Contact Us
Digga North America
Digga: Innovating Auger and Anchor Drive Solutions Since 1981
Digga is a global leader in auger and anchor drive technology, offering high-performance solutions for drilling and anchoring across industries. Established in 1981, Digga has been at the forefront of innovation, designing and manufacturing cutting-edge drives and attachments for a wide range of machinery, including skid steer loaders, excavators (up to 90 tons), truck cranes, backhoes, telehandlers, tractors, and mini loaders.
Product Range
- Auger bits
- Sweeper brooms
- Pallet forks
- Soil conditioners
- Mounting frames
- Torque monitors
- Wear parts
- Auger extensions
Global Reach and Manufacturing Excellence
With five state-of-the-art manufacturing facilities spanning three continents, Digga exports attachments to over 60 countries. The company’s Brisbane, Australia headquarters features cutting-edge technology, including CNC machining centers, gear-cutting machines, laser cutters, and robotic welding systems.
A Legacy of Innovation
Digga pioneered pendulum drilling in Australia, later revolutionizing the industry with compact planetary-driven auger drives. By investing in gear-cutting technology in 1987, Digga became Australia's largest manufacturer of gearboxes for the construction and earthmoving industries.
Global Expansion
- 1989–1992: New manufacturing facilities in Sydney and Melbourne, Australia
- 1996–1998: Expanded exports to Europe and the USA, establishing a UK distributor (company-owned by 2004)
- 2013: Opened a 57,000 sq. ft. facility in Dyersville, Iowa, with a recent 18,000 sq. ft. extension in 2021
Awards and Commitment
As a multiple award-winning company, Digga has earned recognition for export excellence and innovative designs. With over 300 team members worldwide, Digga is an equal-opportunity employer dedicated to environmentally sustainable manufacturing.
For over 40 years, Digga has remained committed to engineering excellence, customer satisfaction, and global distribution. Whether you're seeking world-class attachments or a rewarding career, Digga is the partner you can trust.
SHOP DIGGA NORTH AMERICA BY TYPE
Best selling
- Featured
- Most relevant
- Best selling
- Alphabetically, A-Z
- Alphabetically, Z-A
- Price, low to high
- Price, high to low
- Date, old to new
- Date, new to old
Sort
Results: 156
Filters
Sort by:
- Featured
- Most relevant
- Best selling
- Alphabetically, A-Z
- Alphabetically, Z-A
- Price, low to high
- Price, high to low
- Date, old to new
- Date, new to old
Sort & Filter
Categories
- 3 Point Adapters
- Amulet Manufacturing
- Anbo
- Anti-Theft Locks & Security Devices for Heavy Equipment
- Attachment Plates And Adapter Systems
- Attachment Racks
- Attachment Racks
- Attachments
- Auger Parts
- Backhoe Loader
- Backhoe Loader Accessories
- Backhoe Loader Buckets
- Backhoe Loader Grapples
- Backhoe Loader Quick Couplers
- Backhoe Loader Replacement Doors & Windows
- Bale Handlers
- Beach Cleaning Machine Attachments
- Best selling products
- Blue Diamond
- Booms & Jibs
Customers Also Viewed
CUSTOMER SUPPORT
If you need support, we’re here to help.
Mon-Fri: 8am-4:30pm CT
Sat-Sun: Closed
You can also email us for customer service or product support.
support@eskidsteer.com
Call or Text
To place a new order or for assistance with an existing order call or text us at
+1 (866) 757-8337
Live Chat
Have questions or need help?
Chat with us using the icon in the bottom left.
Start new chat
- Choosing a selection results in a full page refresh.