-
$16.99
Made in USA Direct fit Overview This auger pilot tooth is the DP-C1HDLR, at the centre of a Digga DR6 rock auger head. On a dedicated rock auger the pilot takes a harder job than on any earth bit: it meets undisturbed rock at... -
$1.00 Off
$5.99 List Price:
$6.99Made in USA Direct fit Overview The TS-C-1 is the inner auger teeth position on Digga A4 earth auger bits — the teeth working closest to the pilot, in the inner pockets of the cutting head. They see less travel per revolution than the... -
$11.00 Off
$539.99 List Price:
$550.99Mini Loader Extension Mount for Digga 1DSS–4DDS Auger Drives Reach beyond the compact loader’s immediate footprint without moving the machine into every tight spot. The Digga Mini Loader Extension Mount adds distance between a compatible mini loader and its auger drive, helping position the... -
$57.00 Off
$2,763.99 List Price:
$2,820.995-yr gearbox warranty 3-yr motor warranty Lifetime shaft pull-out cover Overview The 4DSS is Digga's planetary skid steer auger attachment for skid steers and compact track loaders of 5,500 - 8,400 lbs: 3,276 ft-lbs at 3,000 PSI, 10-30 GPM, a 2 inch hex shaft,... -
$21.00 Off
$1,004.99 List Price:
$1,025.99Genuine Digga auger bit Includes pin, clip, teeth and pilot Overview The Digga A6 is a general purpose earth auger bit for earth and clay, cut with bladed teeth and available with multi-faced tungsten where the ground turns hard. It runs a 2.5 inch... -
$106.90 Off
$1,068.99 List Price:
$1,175.892 inch hex or 2-9/16 inch round hub Eight sizes, 12 to 48 inch Overview The Digga tree planter is a tree planting auger built to drill a planting hole and a narrower centre hole for the tap root in one pass. Each size... -
$0.10 Off
$0.99 List Price:
$1.09A4 Truloc Single Pin – Digga A secure tooth starts with the correct retaining pin. The Digga A4 Truloc Single Pin (part number WP-000271) locks a compatible tooth into a Digga A4 auger bit, helping keep the cutting component retained during auger operation. This... -
$25.00 Off
$1,185.99 List Price:
$1,210.99Made in USA 12-mo warranty Overview This stand carries a Digga TPE extension frame off the machine, for transport and storage. A telescopic frame off the machine is an awkward object — long, heavy, and with nothing flat to rest on — and without... -
$19.00 Off
$921.99 List Price:
$940.99Digga Fixed Center Auger Mounting Bracket for Skid Steers Keep a skid steer auger drive aligned with the loader’s centerline using the Skid Steer Fixed Center Auger Mounting Bracket from Digga. This genuine Digga auger part uses a fixed-center arrangement: the drive stays in... -
$19.00 Off
$926.99 List Price:
$945.99Digga HALO Retrofit Kit for Auger Drives Bring visual alignment guidance to a compatible auger drive that was not originally equipped with HALO. The Digga HALO Retrofit Kit adds a ring of red and green LEDs to the drive, providing a visible reference while... -
$140.00 Off
$6,860.99 List Price:
$7,000.995-yr gearbox warranty 3-yr motor warranty Lifetime shaft pull-out cover Overview This 9DDS excavator auger attachment is the entry point to Digga's 9 to 12 tonne range and the drive most 20,000 lb machines end up on: 7,761 ft-lbs at 3,000 PSI, a 2.5... -
$182.00 Off
$8,888.99 List Price:
$9,070.995-yr gearbox warranty 3-yr motor warranty Lifetime shaft pull-out cover Overview The 7DDT is the largest two-speed high flow skid steer auger attachment Digga builds on a 2.5 inch hex shaft: 6,308 ft-lbs, 48 inches in earth, and the shift that makes large-diameter production... -
$106.00 Off
$5,194.99 List Price:
$5,300.995-yr gearbox warranty 3-yr motor warranty Lifetime shaft pull-out cover Overview A 6DDS high flow skid steer auger attachment gives 4,911 ft-lbs at 3,000 PSI and lifts the clay and shale limit to 30 inches, a quarter more torque than the 5DDS for around... -
$105.00 Off
$5,145.99 List Price:
$5,250.995-yr gearbox warranty 3-yr motor warranty Lifetime shaft pull-out cover Overview The 5DDS is the least demanding high flow skid steer auger attachment Digga builds: 3,904 ft-lbs at 3,000 PSI from as little as 10 GPM, which is what makes it the match for... -
$9.00 Off
$396.99 List Price:
$405.99Digga 3/4" Hydraulic Hose Kit for High-Flow Applications When an attachment needs a larger-bore hydraulic connection, the genuine Digga 3/4" Hydraulic Hose Kit provides a purpose-built hose option for high-flow drives and excavator work. Its 3/4-inch bore is intended for applications where the hydraulic... -
$54.00 Off
$2,606.99 List Price:
$2,660.995-yr gearbox warranty 3-yr motor warranty Lifetime shaft pull-out cover Overview The 2DSS is Digga's planetary skid steer auger attachment for skid steers and compact track loaders of 2,200 - 5,500 lbs: 2,254 ft-lbs at 3,000 PSI, 10-26 GPM, a 2 inch hex shaft,... -
$688.35 Off
$6,889.99 List Price:
$7,578.345-yr gearbox warranty 3-yr motor warranty Lifetime shaft pull-out cover Overview At 9,897 ft-lbs, this 12DDS excavator auger attachment carries 28 percent more turning force than the 9DDS on the same 2.5 inch hex shaft, and asks 22 GPM rather than 18 to produce... -
$149.00 Off
$7,281.99 List Price:
$7,430.993-yr gearbox warranty 2-yr motor warranty Headstart crumber system Overview This is Digga's full-size skid steer trencher attachment: a 2 inch pitch chain digging 3 or 4 feet deep and cutting 6, 8, 10 or 12 inches wide, on 16 to 30 GPM. The... -
$12.00 Off
$558.99 List Price:
$570.99Genuine Digga auger bit Includes pin, clip, teeth and pilot Overview The Digga AB4 is a general purpose bolt-on auger bit for earth and clay, cut with bladed teeth and available with multi-faced tungsten where the ground turns hard. It runs a 2 inch... -
$54.00 Off
$2,626.99 List Price:
$2,680.995-yr gearbox warranty 3-yr motor warranty Overview The 1MDS is Digga's mini loader auger drive for 0.85 to 1 tonne machines: 2,099 ft-lbs at 3,000 PSI from 6 to 16 GPM, on a compact gearbox built for the smallest carriers. Choose the Swing Drive...
- Attachments
- Attachments
- Go to Attachments
-
Skid Steer Attachments
- Skid Steer Attachments
- Go to Skid Steer Attachments
- 3-Point Adapters
- Augers
- Bale Spears
- Beach Cleaners
- Booms
- Brooms
- Buckets
- Concrete Mixers
- Concrete Breakers
- Concrete Claws
- Concrete Crushers
- Concrete Dispensers
- Dozer Blades
- Fence Installers
- Forestry Mulchers
- Graders
- Grapples
- Hay Grapples
- Hoppers
- Mowers And Brush Cutters
- Pallet Forks
- Plate Compactors
- Post Drivers
- Power Rakes
- Sand Baggers
- Snow Blowers
- Snow Plows
- Snow Pushers
- Steel Shears
- Tillers
- Tree Shears
- Tree Spades
- Trenchers
- Vibratory Rollers
- Excavator Attachments
- Mini Skid Steer Attachments
-
Telehandler Attachments
- Telehandler Attachments
- Go to Telehandler Attachments
- Spreader Bars
- Swivel Hooks
- Truss Jibs
- Work Platforms
- Buckets
- Bale Handlers
- Accessories
- Accessories
- Go to Accessories
- Skid Steer Accessories
-
Excavator Accessories
- Excavator Accessories
- Go to Excavator Accessories
- Adapters
- Attachment Parts
- Attachment Parts
- Go to Attachment Parts
-
Skid Steer/Excavator Attachment Parts
- Skid Steer/Excavator Attachment Parts
- Go to Skid Steer/Excavator Attachment Parts
- Auger Parts
- Grapples Parts
- Shop By Brands
- Shop By Brands
- Go to Shop By Brands
- Amulet
- Anbo
- Bradco
- Cardinal Canvas Products
- Depco
- Digga
- Equipment Lock
- EZ SPOT UR
- FFC
- Haugen Attachments
- Ideal Rockaway
- Maxx Attachments
- McLaren Industries
- Paladin Heavy
- Pengo Attachments
- Quality Chain
- Roadrunner
- Shields
- Skeer
- Skid Steer Genius
- Stanley
- Star Industries
- Strike Force
- The Silt Fence Plow
- Top Dog Attachments
- Ventures Equipment
- WAIN ROY
- Blog
- About Us
- Contact Us
Digga North America
Digga: Innovating Auger and Anchor Drive Solutions Since 1981
Digga is a global leader in auger and anchor drive technology, offering high-performance solutions for drilling and anchoring across industries. Established in 1981, Digga has been at the forefront of innovation, designing and manufacturing cutting-edge drives and attachments for a wide range of machinery, including skid steer loaders, excavators (up to 90 tons), truck cranes, backhoes, telehandlers, tractors, and mini loaders.
Product Range
- Auger bits
- Sweeper brooms
- Pallet forks
- Soil conditioners
- Mounting frames
- Torque monitors
- Wear parts
- Auger extensions
Global Reach and Manufacturing Excellence
With five state-of-the-art manufacturing facilities spanning three continents, Digga exports attachments to over 60 countries. The company’s Brisbane, Australia headquarters features cutting-edge technology, including CNC machining centers, gear-cutting machines, laser cutters, and robotic welding systems.
A Legacy of Innovation
Digga pioneered pendulum drilling in Australia, later revolutionizing the industry with compact planetary-driven auger drives. By investing in gear-cutting technology in 1987, Digga became Australia's largest manufacturer of gearboxes for the construction and earthmoving industries.
Global Expansion
- 1989–1992: New manufacturing facilities in Sydney and Melbourne, Australia
- 1996–1998: Expanded exports to Europe and the USA, establishing a UK distributor (company-owned by 2004)
- 2013: Opened a 57,000 sq. ft. facility in Dyersville, Iowa, with a recent 18,000 sq. ft. extension in 2021
Awards and Commitment
As a multiple award-winning company, Digga has earned recognition for export excellence and innovative designs. With over 300 team members worldwide, Digga is an equal-opportunity employer dedicated to environmentally sustainable manufacturing.
For over 40 years, Digga has remained committed to engineering excellence, customer satisfaction, and global distribution. Whether you're seeking world-class attachments or a rewarding career, Digga is the partner you can trust.
SHOP DIGGA NORTH AMERICA BY TYPE
Best selling
- Featured
- Most relevant
- Best selling
- Alphabetically, A-Z
- Alphabetically, Z-A
- Price, low to high
- Price, high to low
- Date, old to new
- Date, new to old
Sort
Results: 156
Filters
Sort by:
- Featured
- Most relevant
- Best selling
- Alphabetically, A-Z
- Alphabetically, Z-A
- Price, low to high
- Price, high to low
- Date, old to new
- Date, new to old
Sort & Filter
Categories
- 3 Point Adapters
- Amulet Manufacturing
- Anbo
- Anti-Theft Locks & Security Devices for Heavy Equipment
- Attachment Plates And Adapter Systems
- Attachment Racks
- Attachment Racks
- Attachments
- Auger Parts
- Backhoe Loader
- Backhoe Loader Accessories
- Backhoe Loader Buckets
- Backhoe Loader Grapples
- Backhoe Loader Quick Couplers
- Backhoe Loader Replacement Doors & Windows
- Bale Handlers
- Beach Cleaning Machine Attachments
- Best selling products
- Blue Diamond
- Booms & Jibs
Customers Also Viewed
CUSTOMER SUPPORT
If you need support, we’re here to help.
Mon-Fri: 8am-4:30pm CT
Sat-Sun: Closed
You can also email us for customer service or product support.
support@eskidsteer.com
Call or Text
To place a new order or for assistance with an existing order call or text us at
+1 (866) 757-8337
Live Chat
Have questions or need help?
Chat with us using the icon in the bottom left.
Start new chat
- Choosing a selection results in a full page refresh.