-
$44.00 Off
$438.99 List Price:
$482.99Pengo by Paladin Double flight, 5/16" thick 2" hex or 2 9/16" round Overview This Pengo skid steer auger bit — the Aggressor Earth Auger — is the professional-grade auger in the Pengo range, built for daily and constant use. Twenty-six configurations cover 6"... -
$270.00 Off
$2,697.99 List Price:
$2,967.99🏭Made in USA 🔒1-year warranty ⚙No hydraulics required 📘 Overview The Haugen telehandler to skid steer adapter (Tele-Tach) is a skid steer adapter plate that fits your telehandler's carriage and presents a Universal Skid Steer Quick Attach face, so ground-engaging skid steer attachments will... -
$3.00 Off
$25.99 List Price:
$28.99Pengo by Paladin Soil rating 5–6 Exclusive to the BoRH head Overview These Pengo rock auger bullet teeth — the P21 RR conical tooth, stocked as PG-137990 — are designed exclusively for the Pengo BoRH bolt-on rock head. Each tooth weighs 0.59 lb and... -
$9.00 Off
$396.99 List Price:
$405.99Digga 2-Inch Hex Outer Auger Extension When a hole must reach below the effective length of the auger bit, a compatible extension adds working reach between the drive and the bit. This Digga auger extension is identified as a 2-inch hex outer model, providing... -
$95.00 Off
$949.99 List Price:
$1,044.99📐Fits existing fork tines 🔗Converts between standards 📘 Overview The Haugen forklift trailer mover (MFBA) is a fork mounted trailer spotter with a 2" standard receiver hitch that slides onto your pallet fork tines. Move trailers around a yard or loading dock with the... -
$8.00 Off
$362.99 List Price:
$370.99Digga Auger Adapters for Different Output Shafts An auger bit and drive need compatible connection points to work together. Digga auger adapters provide a practical way to bridge a difference in output shaft, including transitions between hex and round hubs. For skid steer auger... -
$18.00 Off
$852.99 List Price:
$870.99Genuine Digga auger bit Includes pin, clip, teeth and pilot Overview The Digga RC4 is a taper tooth auger bit for skid steer — one bit for earth, clay and fracturable rock, rather than two bits for two jobs. It runs a 2 inch... -
$1.00 Off
$41.99 List Price:
$42.99Made in USA Direct fit Overview This square-drive auger pilot is the PM-SQ-1 for Digga A4 earth auger bits — the point at the centre of the head that enters the ground first and holds the auger where you set it. Digga moved this... -
$199.00 Off
$3,999.99 List Price:
$4,198.99⚙No hydraulics required 📐Fits existing fork tines 📏Multiple sizes available 📘 Overview The Haugen trash hopper for forklift and telehandler fleets (MTH) is a fork-slot debris container for telehandlers and industrial forklifts. It slips over the pallet fork tines already on your machine —... -
$215.00 Off
$2,153.99 List Price:
$2,368.99🏭Made in USA since 1981 🔒5-year factory guarantee 🔨Two section tubular steel boom 📘 Overview A Star Industries forklift jib boom extends the reach of a forklift so loads can be placed over or under obstacles a carriage cannot get past. Four models cover... -
$372.00 Off
$3,715.99 List Price:
$4,087.99🏭Made in USA since 1981 🔒5-year factory guarantee 🔨3/16 in plate steel sides 📘 Overview A Star Industries forklift trash hopper is placed where the work is and filled as the job progresses. The open face design is the point: crews wheel barrows and... -
$21.00 Off
$1,029.99 List Price:
$1,050.99Genuine Digga auger bit Includes pin, clip, teeth and pilot Overview The Digga RC6 is a taper tooth rock and earth combo auger bit — one bit for earth, clay and fracturable rock, rather than two bits for two jobs. It runs a 2.5... -
$64.00 Off
$638.99 List Price:
$702.99🏭Made in USA since 1981 🔒5-year factory guarantee 🔨High wear materials throughout 📘 Overview The Star Industries 910 series mini excavator bucket is built to work with almost all mini excavators, in five widths from 10 to 36 inches, each available smooth or with... -
$76.00 Off
$3,719.99 List Price:
$3,795.99🏭 USA Made 🔒 2-Yr Warranty 🔄 90° Tilt 📐 36-84" Wide 📘 Overview The Amulet T3 excavator tilt bucket tilts 45° each way for a full 90° range, which is what lets an operator cut a slope, profile a ditch or finish a... -
$54.00 Off
$2,606.99 List Price:
$2,660.995-yr gearbox warranty 3-yr motor warranty Lifetime shaft pull-out cover Overview This 3DSS mini excavator auger attachment suits mini excavators and backhoes up to 11,000 lbs (up to 5T). It brings 2,829 ft-lbs at 3,000 PSI on a 2 inch hex shaft, and comes... -
$265.00 Off
$2,651.99 List Price:
$2,916.99🏭Made in USA since 1981 🔒5-year factory guarantee 🔨10-gauge steel, 1/4 in angle reinforced 📘 Overview A Star Industries crane lift box raises and lowers supplies, materials and small equipment to a working level, with four-point lift eyes so the load hangs square rather... -
$80.00 Off
$799.99 List Price:
$879.99🏆Engineer certified 📏Multiple sizes available 📘 Overview Haugen forklift fork extensions (MFE) add reach to the tines already on your machine — the simplest way to handle loads longer than your standard tines will safely carry. Full tube extensions that pin onto the host... -
$210.00 Off
$2,096.99 List Price:
$2,306.99Bradco / Paladin built Built for edge visibility Standard or long floor Overview This Bradco skid steer low profile bucket is built so the operator can see the cutting edge — which is what makes it a landscaping and grading tool rather than a... -
$193.00 Off
$1,926.99 List Price:
$2,119.99Bradco / Paladin built Fits any ISO class II ITA rail 175 lbs · 14" min load Overview The Bradco SharkBite is a grapple for pallet forks that installs onto any ISO-standard class II ITA fork rail, turning a regular set of forks into... -
$121.00 Off
$1,202.99 List Price:
$1,323.99🏭Made in USA since 1981 🔒1-year warranty 🔨Forged from one piece of carbon steel 📘 Overview Star Industries over the bucket forks add forklift capability to a loader or backhoe without removing the bucket. The tines hang over the bucket lip on a shaft...




















