-
$839.00 Off
$8,389.99 List Price:
$9,228.99🏭Made in USA 🔩Hardox 450 teeth 🔒1-year warranty 📘 Overview The Rockaway skid steer landscape rake pulls 1/2" to 8" rocks out of the ground and conditions the soil in the same pass, cutting about 3/4" deep with each pass of its 14.5" rotor.... -
$3,312.00
🏭Made in USA 📘 Overview A hydraulic tamper for the hole you just set. The EZ Spot UR Hydraulic Hand Tamper (EZ-TAMPER) is a hand-held soil tamper powered by your machine’s hydraulics, used to compact backfill around a pole or post immediately after it... -
$460.00 Off
$4,599.99 List Price:
$5,059.99📐Fits existing fork tines 📘 Overview The Haugen telescoping forklift jib that also pivots (MIJ-A) is a fork-mounted forklift jib boom adjusting from 4 to 12 feet with eight positions, and pivoting from vertical through to a 35-degree angle. Rated 2,050 lbs at 12... -
$193.00 Off
$1,925.99 List Price:
$2,118.99🔩Forged Conus tines 🔧Replaceable wear parts 🪝Universal quick attach 📘 Overview The Haugen large square bale spear range is a skid steer bale spear family in three configurations, each a conus tine bale spear. The MLSBS-C2 carries four 39" Conus 2 tines on a... -
$163.00 Off
$1,626.99 List Price:
$1,789.99📐Fits existing fork tines 📘 Overview The Haugen forklift loading platform Haugen calls the "Renters Helper" (MLB 48) is a 48" x 48" fork-mounted platform with a built-in ramp for loading rolling equipment into pickup beds. Rated 1,000 lbs, with a safety bar to... -
$351.00 Off
$3,502.99 List Price:
$3,853.99🔧Replaceable wear parts 📐Fits existing fork tines 📏Multiple sizes available 📘 Overview The Haugen forklift snow plow (HFSB) is a fork mounted snow blade that slips onto existing tines and turns any fork-equipped machine into a plough. No quick attach needed. Three widths: 60",... -
$252.00 Off
$2,522.99 List Price:
$2,774.99🏭Made in USA since 1981 🔒1-year warranty 🔨1/4 in and 3/16 in steel plate 📘 Overview A Star Industries self dumping hopper collects, moves and discharges waste around a site without anyone handling the load. It slips onto the forks of a straight-mast or... -
$170.00 Off
$1,699.99 List Price:
$1,869.99🏭Made in USA since 1981 🔒5-year factory guarantee 🔨Fully welded seams, inside and out 📘 Overview The Star Industries UT31 is a high capacity skid steer bucket built for loose material — the deeper utility profile carries 17 to 24.2 cubic feet heaped, noticeably... -
$55.00 Off
$553.99 List Price:
$608.99🏭Made in USA since 1981 🔒1-year warranty 🔨Cast boring head, patented coupler 📘 Overview The Star Industries 160A-HDSF is the single flight range of skid steer auger bits, built for most soil types — black dirt and sandy soil, highly compacted ground, heavy clay,... -
$450.00 Off
$4,499.99 List Price:
$4,949.99🔧Replaceable wear parts 📏Multiple sizes available 📘 Overview The Haugen quick attach telehandler snow bucket (MSBT) is a high capacity light material bucket for snow, mulch, wood chips and other low-density material where volume matters more than digging force. Four widths from 60" to... -
$400.00 Off
$3,998.99 List Price:
$4,398.99🔧Replaceable wear parts 📐Fits existing fork tines 🛠Machine-specific mount 📘 Overview The Haugen quick attach telehandler bucket (MDBT) is a telehandler dirt bucket for general purpose loading that mounts directly to your telehandler's carriage rather than sitting on the forks. Four widths from 60"... -
$350.00 Off
$3,498.99 List Price:
$3,848.99🔧Replaceable wear parts 📐Fits existing fork tines 📘 Overview The Haugen fork slot bucket (MFSB) is a telehandler bucket attachment that slips over your existing fork tines — no quick attach, no carriage change, so it fits any telehandler or forklift whose tines suit... -
$229.00 Off
$2,281.99 List Price:
$2,510.99🪝Universal quick attach 📏Multiple sizes available 📘 Overview The Haugen skid steer rock bucket (MSRB) is a rock bucket for skid steer work, built for field rock picking, construction clean-up and landscape preparation — an open-tine bucket with 3" tine spacing and a serrated... -
$81.00 Off
$804.99 List Price:
$885.99⚙No hydraulics required 📏Multiple sizes available 📘 Overview Haugen clamp on pallet forks (MCOF) convert a bucket into a fork attachment in minutes — the clamp on bucket forks solution for machines that only have one bucket and need to move pallets occasionally. Three... -
$397.00 Off
$3,961.99 List Price:
$4,358.99Paladin / FFC built ½ or ¾ yard Universal quick attach Overview The FFC skid steer concrete chuter carries and places concrete accurately where a mixer truck cannot reach. Two capacities: the ½ yard 11050-0022 at 450 lbs with a 36.5" container, and the... -
$190.00 Off
$1,897.99 List Price:
$2,087.99Bradco / Paladin built Balled or boxed trees 145 lbs Overview This Bradco mini skid steer tree fork handles balled or boxed landscape trees and shrubs on mini loaders. It uses a universal mount and weighs just 145 lbs, with lightweight yet strong construction.... -
$307.00 Off
$3,068.99 List Price:
$3,375.99Bradco / Paladin built 78" working width Staggered grate design Overview This Bradco skid steer land plane — the Land Sculptor — levels and shapes ground in a 78" working width. It is available bare at 515 lbs or with comb and scarifier at... -
$1,931.00 Off
$19,306.99 List Price:
$21,237.99Bradco / Paladin built Cuts up to 10" 30–45 GPM Overview This Bradco extreme duty brush cutter — the Ground Shark Extreme Duty (XD) — clears brush and hardwoods up to 10" in diameter on a skid steer quick attach, running on 30–45 GPM... -
$111.00 Off
$1,106.99 List Price:
$1,217.99🪝Universal quick attach 📏Multiple sizes available 📘 Overview The Haugen skid steer pallet forks (MPF and MHPF) are rail-style forks — a frame with a 1/2" beveled heavy rail that lets the tines slide and lock anywhere along it, rather than sitting in fixed... -
$272.54 Off
$2,725.45 List Price:
$2,997.99📐Fits existing fork tines 🛠Machine-specific mount 📏Multiple sizes available 📘 Overview The Haugen telehandler truss jib (MTJ) is a truss boom attachment with a quick attach mount CNC machined to your specific telehandler make, model and year. Lengths run from 2 to 15 feet,...
















