Guaranteed Fit
Fast Shipping
Hassle-Free Returns
Description
Made in USA
Hardox 450 teeth
1-year warranty
Overview
The Rockaway skid steer landscape rake pulls 1/2"" to 8"" rocks out of the ground and conditions the soil in the same pass, cutting about 3/4"" deep with each pass of its 14.5"" rotor. It mounts on a standard skid steer quick attach plate and replaces hours of hand-raking on seed bed prep, sod installation, construction cleanup and horse arena rock removal. You are choosing between two working widths and two collection buckets. The 7415 works 73"" wide with 69 Hardox 450 teeth and weighs 1,180 lb; the 8415 works 84"" wide with 81 teeth and weighs 1,300 lb — Ideal Rockaway recommends a rake wider than your machine's tracks, so the 84"" suits larger track loaders while the 73"" covers most wheel loaders up to 70"" wide. The standard solid bucket keeps everything the rotor picks up; the screening bucket, introduced in 2024, carries 3/4"" diamond-shaped openings that let loose dirt fall back onto the job site while 1"" and larger rocks stay in. Both widths require 10+ GPM at up to 3,200 PSI and arrive with their own bucket and hydraulic quick-connect hoses.
Key Features of the Rockaway Landscape Rake
- Removes 1/2"" to 8"" rocks — the rotor pulls rocks, sticks and buried debris out of the soil and carries them into the collection bucket.
- Hardox 450 steel teeth — 69 teeth on the 7415 and 81 on the 8415, each individually welded so a broken tooth can be replaced rather than condemning the rotor.
- Spiral tooth pattern — two sets of spiraled teeth draw material toward the centre of the cut, which stops the rake leaving dirt trails at the edges of each pass.
- Front hood porting conditions the soil — dirt filters back out through the front of the hood as you work, so the same pass that removes rocks leaves a seed-ready bed.
- One rotor, one #80 chain, two bearings — the entire drivetrain. Grease the bearings and the machine is serviced.
- Chain runs outside the hood under a guard — the #80 chain and its larger sprockets were both increased from #60 on the Super Duty revision for added strength.
- 1 3/8"" rotor shaft on 1 3/8"" bearings — up from 1 1/4"", with a bolted rotor hub that can be serviced without cutting.
- 3/16"" tube frame — 50% heavier than the previous 1/8"" frame, with 1/2"" stainless steel wear runners along the bottom of both sides.
- 1/4"" front push bar — gives a dedicated wear surface and lets the rake push soil forward as well as rake it.
- Rubber protection flap — hangs 8"" to 10"" into the bucket to hold collected material in.
- Reinforced hood with a solid steel centre — slotted holes reduce dust while the hoses run under protective covering.
- Low-profile design — the operator can see the ground and the work from the seat, which Ideal Rockaway says makes the rake easier to use and cuts down on accidents during operation.
- Compact footprint — 61"" long and 24"" high on both models, taking less trailer space than comparable rakes.
Why Contractors Choose the Rockaway Landscape Rake
- Removes rocks and preps the seed bed in one pass — the rotor digs roughly 3/4"" down and the hood porting returns conditioned soil, so you are not raking and then tilling.
- Three wear items instead of a gearbox — with one rotor, one chain and two bearings, there is very little on this rake that can strand you mid-job.
- Broken teeth are a tooth-level repair — teeth are individually welded and replaceable, so hitting something solid costs you one tooth rather than a rotor assembly.
- The screening bucket keeps your footing on site — 3/4"" openings drop loose dirt and arena footing back where it belongs instead of hauling it away mixed with the rocks.
- Runs on standard-flow hydraulics — 10+ GPM covers it, so a high-flow machine is not required and most of your hydraulic power stays available for the tracks or wheels. That makes this skid steer landscape rake attachment usable on far more machines than a high-flow-only tool.
- Hardox 450 teeth last through many seasons of use — the teeth pulverize, aerate, level and condition the soil as they cut, and the hardened steel keeps doing it through repeated rocky ground.
Rockaway Skid Steer Landscape Rake Specifications
| Specification | Value |
|---|---|
| Rotor diameter | 14.5 in |
| Tooth material | Hardox 450 steel, replaceable |
| Tooth pattern | Two sets, spiral-mounted |
| Rock removal range | 1/2 in to 8 in diameter |
| Working depth | Approximately 3/4 in per pass |
| Drive | Single rotor, #80 chain, two rotor bearings |
| Rotor shaft | 1 3/8 in on 1 3/8 in bearings, bolted hub |
| Maximum pressure | 3,200 PSI |
| Overall length | 61 in |
| Overall height | 24 in |
| Frame | 3/16 in tube frame, 1/2 in stainless steel wear runners |
| Push bar | 1/4 in steel, front-mounted |
| Mount | Standard skid steer quick attach plate |
| Warranty | 1 year |
| Country of origin | Made in USA — Lancaster County, Pennsylvania |
Rockaway 7415 vs 8415 — Variant Specifications
| Specification | 7415 Super Duty | 8415 Super Duty |
|---|---|---|
| Working width | 73 in | 84 in |
| Bucket width | 73.125 in | 84.125 in |
| Overall width | 80.375 in | 91.375 in |
| Number of teeth | 69 | 81 |
| Hydraulic flow required | 10+ GPM | 10+ GPM |
| Working weight | 1,180 lb | 1,300 lb |
| Solid bucket SKU | 7415SD | 8415SD |
| Screening bucket SKU | 7415sb | 8415sb |
| Typical carrier | Wheel loaders and smaller track loaders | Larger track loaders |
Machine Compatibility
Compatible with skid steer loaders and compact track loaders equipped with a Universal Quick Attach (SSQA) system, including:
Bobcat
Caterpillar
John Deere
Case
New Holland
Takeuchi
Kubota
Gehl
Ideal Rockaway also offers custom attachment plates and 3-point hitch mounting for tractors on request, and the rake works with Avant loaders — some Avant models need a specialised adapter.
Hydraulic requirement: 10+ GPM at up to 3,200 PSI. This is a standard-flow attachment; a high-flow machine is not required. Everything needed to attach is supplied, including the bucket and hydraulic quick-connect hoses.
Sizing guidance: Ideal Rockaway recommends running a rake wider than your machine's tracks or wheels so the rake clears what the machine drives over. The 73"" 7415 covers most wheel loaders up to 70"" wide; the 84"" 8415 suits larger track loaders. Running a stand-on or walk-behind mini loader instead? The 44"" Rockaway 4415 mini power rake is the model that fits a mini mount and runs on 8+ GPM.
Compatibility is determined by mount type, not brand — confirm your machine's quick attach configuration and available hydraulic flow before ordering.
Rockaway Landscape Rake Questions, Answered
Should I buy the 73"" 7415 or the 84"" 8415?
Choosing a landscape rake for skid steer work starts with the machine, not the job. Ideal Rockaway recommends a rake wider than your tracks or wheels, so the 84"" 8415 is the choice for larger track loaders, while the 73"" 7415 covers most wheel loaders up to 70"" wide. The 8415 also carries 81 teeth against the 7415's 69, and weighs 1,300 lb against 1,180 lb. Both need the same 10+ GPM. Ideal Rockaway rates the 7415 at 100 cubic feet of collection capacity, so it holds a useful amount between trips to the dump pile.
What is the difference between the solid bucket and the screening bucket?
The solid bucket is the standard collection bucket and keeps everything the rotor throws into it, rocks and dirt together. The screening bucket is perforated with 3/4"" diamond-shaped openings, measured corner to corner, which let loose dirt and fine material fall back onto the ground while rocks and debris 1"" and larger stay in the bucket. The screening bucket is reinforced underneath and carries the same bottom wear strips as the solid bucket. If you have priced a skid steer screening bucket as a separate attachment, the screening-bucket Rockaway covers both jobs in one pass — it lifts the rocks out and screens the soil while it works.
Can I put a screening bucket on a Rockaway I already own?
Yes. The Rockaway screening bucket is a straight swap — unpin the solid bucket from the hood and pin the screening bucket in its place. Ideal Rockaway offers the screening bucket for all three Rockaway sizes, including units bought in previous years.
What hydraulic flow does the Rockaway landscape rake need?
The 7415 and 8415 both require 10 GPM or more, with a maximum operating pressure of 3,200 PSI. This is a standard-flow skid steer attachment, so a high-flow machine is not needed, and most of your machine's hydraulic power stays available for driving the tracks or wheels through rough ground.
What size rocks will the Rockaway actually pick up?
Ideal Rockaway rates this skid steer rock rake for rocks between 1/2"" and 8"" in diameter. Alongside rocks it lifts out sticks, root pieces and other buried debris, and the rotor works about 3/4"" into the soil on each pass.
Is anything else needed to run this skid steer landscape rake?
No. Every Rockaway ships with its own collection bucket and its own hydraulic quick-connect hoses, and mounts on a standard skid steer quick attach plate. There is nothing to buy separately to put the rake to work, which makes it a self-contained rock rake for skid steer crews who would rather order one part number than a kit list.
Can a Rockaway remove rocks from a horse arena?
Yes, and the screening bucket is what makes it practical as an arena rock picker. Ideal Rockaway tested the screening bucket at the Columbia Riding Club in Lancaster County, Pennsylvania: the rotor lifts the rocks out of the riding surface, then the 3/4"" screening openings let the arena footing that came up with them fall back into the arena instead of leaving with the rocks. Note that the Rockaway is a rock removal attachment, not an arena drag or groomer — it takes the rocks out rather than levelling the footing.
How is a Rockaway different from a Harley rake?
Both get shopped as a skid steer power rake, but they do different work. A Harley rake is a power box rake: it pulverizes and grades the top layer of soil, windrowing material to the side. The Rockaway is built to lift rocks out of the ground and carry them off in a collection bucket, conditioning the soil as it goes. If the goal is getting rocks off the site, the Rockaway collects them; if the goal is purely grading, a box rake is the other tool. Ideal Rockaway describes the 7415 as most comparable to a Rockhound 72B.
What maintenance does the Rockaway landscape rake need?
Very little, by design. The entire drivetrain is one rotor, one #80 chain and two rotor bearings, and routine service is greasing those bearings. The chain runs outside the hood under a protective guard, and the rotor uses a bolted hub so it can be serviced without cutting welds.
What happens if a tooth breaks?
Each Hardox 450 tooth on the Rockaway rotor is individually welded in place and replaceable, so a broken tooth is repaired one tooth at a time rather than requiring a new rotor assembly. Ideal Rockaway also supplies complete rotor assemblies and replacement parts kits for these models.
Which way do you drive when using a Rockaway?
Ideal Rockaway advises that the rake works best with the skid steer run in reverse, letting the rotor pull rocks up and back into the collection bucket as the machine travels.
What warranty comes with the Rockaway landscape rake?
The Rockaway landscape rake is covered by a 1-year warranty. The design keeps the wear items few and cheap in any case — the drivetrain is a single rotor, one #80 chain and two rotor bearings, and individual Hardox 450 teeth are replaceable rather than requiring a new rotor. If you have a warranty question before buying, call eskidsteer.com at (866) 757-8337.
How is the Rockaway landscape rake shipped?
Shipping is calculated at checkout — add the rake to your cart, enter your delivery address, and the shipping charge is displayed before you complete your order. Lift gate service is available for residential deliveries and can be selected at checkout.
How do I order?
Add the Rockaway landscape rake to your cart directly on eskidsteer.com and complete checkout online. Have your machine make, model and serial number ready to confirm fitment before ordering. If you have a fitment question before purchasing, call us at (866) 757-8337.
Rockaway Landscape Rake Video
Shipping
The following are estimated processing and delivery times. We make every effort to fulfill orders as quickly as possible.
We only deliver within the United States. If a package can’t be delivered due to an error entering your shipping address, Eskidsteer is not responsible for any additional fees that may incur to reroute or reship the package.
By placing an order through this Website you will be agreeing to the terms below. These are provided to ensure both parties are aware of and agree upon this arrangement to mutually protect and set expectations for our service. Please read our Terms of Service.
How do I place an order?
We do not take orders on the phone for security reasons. To place an order, go to a product page, select the desired quantity of the item, and add it to your cart via the “Add to Cart” button. During checkout, you just need to enter or confirm your shipping address and credit card information, then you can place your order
Shipping fee:
We offer Free Shipping for most items.
*Free shipping is not applicable to parts orders.
Delivery Time= Handling time +Transit Time:
Handling time: 3-3 Days
Transit time: 5-8Days
Order cut off Time: 5:00 PM (GMT-05:00) Eastern Standard Time (New York)
Which shipping carriers do you use to ship?
All Shipments are done with LTL Carriers,UPS, FedEx, DHL, and USPS
Failure to Accept Products on Delivery
If you reject delivery of goods ordered from us, or otherwise fail to accept delivery of the goods, you agree to pay for all related and additional shipping fees, duties, taxes, restocking fees and other charges arising from such failure to accept delivery. After such failure to accept delivery of the goods, it shall be your responsibility to pay for and arrange a new shipping date.
Tracking Information:
We also provide tracking numbers for all orders. Once your order has been shipped, we will provide you with a tracking number that you can use to track the progress of your package. You will receive this tracking number via email.
We understand the importance of knowing the status of your order, and we strive to provide you with transparent and reliable tracking information. If you have any questions or need assistance with tracking your order, please don’t hesitate to contact our customer support team. We’re here to help!.
Can I ship to multiple addresses?
At this time, we cannot ship to multiple addresses in one order. Please place separate orders on support@eSkidsteer.com to ship to different addresses. If you need assistance, please contact our Customer Service.
Wrong Address:
Please review and ensure that you have entered the correct address. We are not responsible for non-delivery due to errors in the address that you provide. If an order is returned due to an incorrect address, we will refund the original order (excluding the shipping fee) and ask that you re-submit your order.
Change of Address:
If your item hasn’t yet been shipped, you may change your delivery address by emailing at support@eSkidsteer.com. Please note that we are not obligated to ensure changes to the delivery address after the item has been delivered.
If you have any questions or require further assistance regarding the shipping policy, please do not hesitate to contact our customer support team.
Phone: +1 8667578337
Email: support@eSkidsteer.com
Address: 30 North Gould St Suite R, Sheridan, WY 82801, USA
Returns
Returns
We offer returns and exchanges in limited circumstances as follows:
- In order to submit a return, you must contact us by email at support@eSkidsteer.com for us to confirm the items ordered are eligible for return or exchange;
- To be eligible for a return, you must commence the return process within 30 days of your item being delivered to you and:
- it must be unused, for example, once an item is hooked up to an attachment plate, hydraulic lines or electrical connection, it will not be eligible for return. Likewise, if your item shows any sign of use, which we may determine in our sole and absolute discretion, we will not accept the return;
- it must be in the same condition you received it in. You will be required to send us timestamped photos of the condition of your items as a condition to determine your eligibility for the return or exchange; and
- it must be returned in the same packaging or containers as it was received in.
We do not accept returns for products that were listed as final sale items at the time of purchase.
You agree to pay a 25% restocking fee on all returns, which we will deduct from any refund owing to you.
After the above referenced 30-day period, unfortunately we cannot offer you a refund or exchange, under any circumstances.
If your return or exchange is approved, we will provide instructions on shipping your items back to us or the applicable supplier via email.
You agree that you shall be responsible for all return shipping costs and related expenses.
Our shipping cost to you is not refundable.
You are also responsible for ensuring the items are carefully packaged for shipment and that risk of loss or damage during return shipping shall be your sole liability. You may wish to obtain insurance while the returned items are in transit.
Lost or Damaged
If the item is damaged when you receive it, do not sign the proof of delivery, and contact us immediately at support@eSkidsteer.com. If you sign the proof of delivery form, you cannot later claim the item was lost (i.e. not delivered) or damaged on arrival.
If the item is damaged on arrival take photos of the damage with a time stamp.
In the event the item is lost or damaged on arrival, we will assist you with filing a reimbursement claim directly with the applicable supplier or shipping company as applicable. However, you agree that as we are not the direct supplier of the items, it shall be your responsibility to pursue any claims with the applicable supplier in the event your lost or damaged item is not replaced by the supplier or carrier.
No Warranties Offered by Us
Everything on the Website, including all products available for order, are provided "as is" without warranty of any kind from us, including all implied warranties and conditions of merchantability and fitness for a particular purpose. We hereby disclaim all warranties and conditions of any kind, whether express, implied or statutory.
You acknowledge that we do not manufacture the products made for sale on the Website and that such products and the individual components thereof, are made by third party manufacturers.
Warranties Offered by Third Parties
Our third party suppliers and manufacturers may offer limited warranties on certain products sold on the Website. You may contact us and we can refer you to the applicable supplier or manufacturer if you wish to inquire about the details of any such warranties offered by those third parties. You agree that we shall not be liable or responsible for any warranties granted by such third parties.
To the extent products you order from us have warranties provided by a third party supplier or manufacturer, upon your request we agree to reasonably assist with the submission of warranty claims to such third parties. However, we make no guarantees that any warranty claims will be successful. You agree it is your responsibility to ensure warranty claims are submitted within the applicable timeframe to the applicable supplier or manufacturer.
- Choosing a selection results in a full page refresh.