Description
🏭Made in USA since 1981
🔒5-year factory guarantee
🔨Fully welded seams, inside and out
📘 Overview
The Star Industries UT31 is a high capacity skid steer bucket built for loose material — the deeper utility profile carries 17 to 24.2 cubic feet heaped, noticeably more than a low-profile dirt bucket of the same width. Seven widths are offered from 60 to 84 inches, and each can be ordered plain, with bolt-on teeth, or with a bolt-on blade. Construction is extra heavy-duty steel with fully welded seams inside and out, a reinforced hat section across the top, steel side blades, and a 3/8 inch plate universal quick-tach sized for current high-flow skid steer loaders.
⚙ Key Features of the Star Industries UT31 Utility Bucket
- Seven widths: 60, 66, 68, 72, 78, 80 and 84 inches
- Heaped capacity 17.0 to 24.2 cu ft depending on width
- 23 1/2 inch outside height and 34 inch outside depth across the range
- Reinforced hat section provides strength across the entire top of the bucket
- Steel side blades strengthen and protect the bucket sides
- Seams continuously welded inside and outside the shell
- Beveled hard carbon steel punched blade on the leading edge
- Heavy 1/2 inch x 3 inch scuff bars — three to five depending on width — reinforce the bucket bottom
- Integrated safety step
- 3/8 inch plate universal quick-tach built for higher-powered current skid steer loaders
- Optional pin-on series 23 teeth, 2 1/4 inches across the point
- Optional reversible 5/8 inch x 8 inch bolt-on blade giving roughly three times the wear
- Optional bolt-on side cutters, part LP-SC, sold as a pair
- A heavy duty skid steer bucket built as a utility bucket skid steer operators can run daily
🔑 Why Buyers Choose the Star Industries UT31 Utility Bucket
- The utility profile carries more than a dirt bucket at the same width — a 72 inch UT31 holds 20.6 cu ft heaped against 18.0 cu ft for the 72 inch low-profile dirt bucket, so the same doorway width moves 14 percent more mulch, grain or snow per pass.
- The bolt-on blade takes the wear instead of the bucket lip — a reversible 5/8 inch x 8 inch blade gives roughly three times the edge life and unbolts when spent, and flipping it once doubles the interval again before replacement.
- Teeth and blade are a choice, not a bundle — order the UT31 plain for snow and grain where a smooth edge scrapes clean, with teeth for frost and compacted soil, or with the bolt-on blade for abrasive material.
- Scuff bars protect the panel that wears first — three to five 1/2 inch x 3 inch bars across the bucket bottom take the abrasion from dragging and back-dragging, which is where an unprotected shell thins and eventually splits.
- 3/8 inch plate quick-tach is sized for current machines — modern skid steers put far more breakout force through the coupler than the machines these buckets were originally designed against, and the heavier plate is what keeps the mount from working loose.
📊 Star Industries UT31 Utility Bucket Specifications
| Model | Width | Width Outside | Height Outside | Depth Outside | Heaped Capacity |
|---|---|---|---|---|---|
| UT31-60 | 60 in | 61 7/8 in | 23 1/2 in | 34 in | 17.0 cu ft |
| UT31-66 | 66 in | 68 3/8 in | 23 1/2 in | 34 in | 18.8 cu ft |
| UT31-68 | 68 in | 70 3/8 in | 23 1/2 in | 34 in | 19.4 cu ft |
| UT31-72 | 72 in | 74 3/8 in | 23 1/2 in | 34 in | 20.6 cu ft |
| UT31-78 | 78 in | 80 3/8 in | 23 1/2 in | 34 in | 22.4 cu ft |
| UT31-80 | 80 in | 82 3/8 in | 23 1/2 in | 34 in | 23.0 cu ft |
| UT31-84 | 84 in | 86 3/8 in | 23 1/2 in | 34 in | 24.2 cu ft |
📋 Utility Bucket Options at Checkout
| Option as shown at checkout | What you get |
|---|---|
| 60" | UT31-60 — 60 in wide, 17.0 cu ft heaped |
| 66" | UT31-66 — 66 in wide, 18.7 cu ft heaped |
| 68" | UT31-68 — 68 in wide, 19.3 cu ft heaped |
| 72" | UT31-72 — 72 in wide, 20.4 cu ft heaped |
| 78" | UT31-78 — 78 in wide, 22.1 cu ft heaped |
| 80" | UT31-80 — 80 in wide, 22.7 cu ft heaped |
| 84" | UT31-84 — 84 in wide, 24.2 cu ft heaped |
| BOB | Adds the reversible 5/8 in x 8 in bolt-on blade sized to the bucket width |
| Teeth | Adds pin-on series 23 teeth, 2 1/4 in across the point, counted by width |
🔗 Teeth, Blades and Side Cutters for the UT31 High Capacity Skid Steer Bucket
Three edge options are available. Bolt-on teeth add the suffix T to the model number and are pin-on series 23 teeth measuring 2 1/4 inches across the point, with tooth count rising by width — 7 teeth at 60 inches, 8 at 66 and 72, 9 at 78 and 10 at 84. A bolt-on blade adds the suffix BOB and is a reversible 5/8 inch x 8 inch double-bevel blade supplied with fasteners: BOB60, BOB66, BOB72, BOB78 and BOB84 by width. Bolt-on side cutters, part LP-SC, are sold as a pair. Replacement teeth parts are available individually — tooth PBTA8023, shank adapter PBT1001 and flex pin PBTRP.
🚜 Which Skid Steers Fit the UT31 Utility Bucket?
The UT31 mounts with a universal quick-tach plate made from 3/8 inch steel, which is the standard skid steer coupler interface. Star builds the bucket profile to suit your specific make and model, so give them at checkout. It fits skid steer loaders and compact track loaders running a universal quick attach coupler from Bobcat, Caterpillar, John Deere, Case, New Holland, Takeuchi, Kubota, Gehl and other makers using the same standard. No auxiliary hydraulics are needed. Match bucket width to your machine rather than to the widest option: a bucket wider than the tyre or track stance loads the coupler unevenly when working one corner. Confirm your machine carries a universal quick attach coupler rather than a proprietary mount before ordering.
| Interface | Detail |
|---|---|
| Mount type | Universal quick attach (SSQA), 3/8 inch plate |
| Machine types | Skid steer loaders and compact track loaders |
| Hydraulics required | None — the UT31 is a non-hydraulic attachment |
| Brands using this standard | Bobcat, Caterpillar, John Deere, Case, New Holland, Takeuchi, Kubota, Gehl |
❓ Star Industries UT31 Utility Bucket Questions, Answered
Skid steer utility bucket or low profile dirt bucket — which do I need?
The Star Industries UT31 utility bucket has a deeper, taller profile than the LP22A low-profile dirt bucket, so it holds more loose material at the same width — 20.6 cu ft against 18.0 cu ft at 72 inches. The low-profile design gives better visibility of the leading edge for grading and back-dragging; the utility profile moves more volume per pass. Choose the utility bucket for mulch, grain, snow and light material, and the low-profile for dirt work.
Which UT31 bucket width should I order?
The UT31 comes in 60, 66, 68, 72, 78, 80 and 84 inch widths. Match the width to your machine rather than picking the largest: a bucket significantly wider than the tyre or track stance puts uneven load through the coupler when digging one corner. As a rule the bucket should be at least as wide as the machine so it clears a path for the tracks.
Do I want a skid steer bucket with teeth or a bolt on blade bucket?
Teeth suit frost, compacted soil and material that needs breaking before it will load. A bolt-on blade suits abrasive material and any work where a clean edge matters, and gives roughly three times the edge life. A plain edge is best for snow and grain where teeth would leave material behind. Teeth add the suffix T to the model, and a blade adds BOB.
How many teeth come on a UT31 bucket?
Tooth count is set by bucket width: 7 teeth on the 60 inch, 8 on the 66 and 72 inch, 9 on the 78 inch and 10 on the 84 inch. They are pin-on series 23 teeth measuring 2 1/4 inches across the point, and the individual tooth, shank adapter and flex pin are all available separately as replacements.
Can I add a bolt-on blade to a bucket I already own?
Yes. The bolt-on blade is ordered by bucket width as BOB60, BOB66, BOB72, BOB78 or BOB84, is a 5/8 inch by 8 inch double-bevel blade, and includes the fasteners. It is reversible, so flipping it when one edge wears doubles the interval before replacement.
Does the UT31 bucket need auxiliary hydraulics?
No. The Star Industries UT31 utility bucket is a non-hydraulic attachment. It mounts on the universal quick attach coupler and needs no hydraulic connection, so any skid steer or compact track loader with a standard quick-tach plate can run it.
What protects the bottom of the bucket from wear?
The UT31 carries heavy 1/2 inch by 3 inch scuff bars across the bucket bottom, three to five of them depending on width, plus steel side blades protecting the sides and a reinforced hat section across the top. The leading edge is beveled hard carbon steel punched blade, and optional side cutters, part LP-SC, protect the corners.
Is the UT31 covered by a warranty?
The Star Industries UT31 utility bucket carries a 5-year factory guarantee and is made in the USA. Star Industries has been manufacturing attachments in the United States since 1981.
Can I buy replacement teeth separately?
Yes. The replacement tooth is part PBTA8023, the shank adapter is PBT1001 and the flex pin is PBTRP, all sold individually so a single worn tooth does not mean a new edge.
Are side cutters available for the UT31?
Yes. Bolt-on side cutters, part LP-SC, are sold as a pair and protect the bucket corners, which are the first areas to wear when working against a wall or trench face.
Are Star skid steer buckets universal, or built to my machine?
Both apply. The mount is the standard universal quick attach coupler, so it fits any skid steer or compact track loader using that interface. But Star notes that different loaders need different bucket profiles to work properly, and builds each bucket to match your specific make and model. Enter your machine make and model at checkout and eskidsteer passes them to Star with the order.
How is a skid steer bucket shipped and how do I order?
Add the bucket to your cart on eskidsteer.com and complete checkout online. Shipping is calculated at checkout once you enter your delivery address, and lift gate service can be selected there for residential deliveries.
📥 Star Industries UT31 Utility Bucket Downloads
🎥 Video
Shipping
The following are estimated processing and delivery times. We make every effort to fulfill orders as quickly as possible.
We only deliver within the United States. If a package can’t be delivered due to an error entering your shipping address, Eskidsteer is not responsible for any additional fees that may incur to reroute or reship the package.
By placing an order through this Website you will be agreeing to the terms below. These are provided to ensure both parties are aware of and agree upon this arrangement to mutually protect and set expectations for our service. Please read our Terms of Service.
How do I place an order?
We do not take orders on the phone for security reasons. To place an order, go to a product page, select the desired quantity of the item, and add it to your cart via the “Add to Cart” button. During checkout, you just need to enter or confirm your shipping address and credit card information, then you can place your order
Shipping fee:
Delivery Time= Handling time +Transit Time:
Handling time: 3-3 Days
Transit time: 5-8Days
Order cut off Time: 5:00 PM (GMT-05:00) Eastern Standard Time (New York)
Which shipping carriers do you use to ship?
All Shipments are done with LTL Carriers, UPS, FedEx, DHL, and USPS
Failure to Accept Products on Delivery
If you reject delivery of goods ordered from us, or otherwise fail to accept delivery of the goods, you agree to pay for all related and additional shipping fees, duties, taxes, restocking fees and other charges arising from such failure to accept delivery. After such failure to accept delivery of the goods, it shall be your responsibility to pay for and arrange a new shipping date.
Tracking Information:
We also provide tracking numbers for all orders. Once your order has been shipped, we will provide you with a tracking number that you can use to track the progress of your package. You will receive this tracking number via email.
We understand the importance of knowing the status of your order, and we strive to provide you with transparent and reliable tracking information. If you have any questions or need assistance with tracking your order, please don’t hesitate to contact our customer support team. We’re here to help!.
Can I ship to multiple addresses?
At this time, we cannot ship to multiple addresses in one order. Please place separate orders on support@eSkidsteer.com to ship to different addresses. If you need assistance, please contact our Customer Service.
Wrong Address:
Please review and ensure that you have entered the correct address. We are not responsible for non-delivery due to errors in the address that you provide. If an order is returned due to an incorrect address, we will refund the original order (excluding the shipping fee) and ask that you re-submit your order.
Change of Address:
If your item hasn’t yet been shipped, you may change your delivery address by emailing at support@eSkidsteer.com. Please note that we are not obligated to ensure changes to the delivery address after the item has been delivered.
If you have any questions or require further assistance regarding the shipping policy, please do not hesitate to contact our customer support team.
Phone: +1 8667578337
Email: support@eSkidsteer.com
Address: 30 North Gould St Suite R, Sheridan, WY 82801, USA
Returns
Returns
We offer returns and exchanges in limited circumstances as follows:
- In order to submit a return, you must contact us by email at support@eSkidsteer.com for us to confirm the items ordered are eligible for return or exchange;
- To be eligible for a return, you must commence the return process within 30 days of your item being delivered to you and:
- it must be unused, for example, once an item is hooked up to an attachment plate, hydraulic lines or electrical connection, it will not be eligible for return. Likewise, if your item shows any sign of use, which we may determine in our sole and absolute discretion, we will not accept the return;
- it must be in the same condition you received it in. You will be required to send us timestamped photos of the condition of your items as a condition to determine your eligibility for the return or exchange; and
- it must be returned in the same packaging or containers as it was received in.
We do not accept returns for products that were listed as final sale items at the time of purchase.
You agree to pay a 25% restocking fee on all returns, which we will deduct from any refund owing to you.
After the above referenced 30-day period, unfortunately we cannot offer you a refund or exchange, under any circumstances.
If your return or exchange is approved, we will provide instructions on shipping your items back to us or the applicable supplier via email.
You agree that you shall be responsible for all return shipping costs and related expenses.
Our shipping cost to you is not refundable.
You are also responsible for ensuring the items are carefully packaged for shipment and that risk of loss or damage during return shipping shall be your sole liability. You may wish to obtain insurance while the returned items are in transit.
Lost or Damaged
If the item is damaged when you receive it, do not sign the proof of delivery, and contact us immediately at support@eSkidsteer.com. If you sign the proof of delivery form, you cannot later claim the item was lost (i.e. not delivered) or damaged on arrival.
If the item is damaged on arrival take photos of the damage with a time stamp.
In the event the item is lost or damaged on arrival, we will assist you with filing a reimbursement claim directly with the applicable supplier or shipping company as applicable. However, you agree that as we are not the direct supplier of the items, it shall be your responsibility to pursue any claims with the applicable supplier in the event your lost or damaged item is not replaced by the supplier or carrier.
No Warranties Offered by Us
Everything on the Website, including all products available for order, are provided "as is" without warranty of any kind from us, including all implied warranties and conditions of merchantability and fitness for a particular purpose. We hereby disclaim all warranties and conditions of any kind, whether express, implied or statutory.
You acknowledge that we do not manufacture the products made for sale on the Website and that such products and the individual components thereof, are made by third party manufacturers.
Warranties Offered by Third Parties
Our third party suppliers and manufacturers may offer limited warranties on certain products sold on the Website. You may contact us and we can refer you to the applicable supplier or manufacturer if you wish to inquire about the details of any such warranties offered by those third parties. You agree that we shall not be liable or responsible for any warranties granted by such third parties.
To the extent products you order from us have warranties provided by a third party supplier or manufacturer, upon your request we agree to reasonably assist with the submission of warranty claims to such third parties. However, we make no guarantees that any warranty claims will be successful. You agree it is your responsibility to ensure warranty claims are submitted within the applicable timeframe to the applicable supplier or manufacturer.
- Choosing a selection results in a full page refresh.