-
$2.00 Off
$22.99 List Price:
$24.99Made in USA Direct fit Overview The TTS-3 is the single-tungsten inner auger teeth position on Digga RC4 combination bits. Where the outer TTD-3 carries two tungsten faces for wear, the inner tooth carries one — because the inner position is asked for breakout... -
$16.00 Off
$169.99 List Price:
$185.99Made in USA Direct fit Overview This hex-drive auger pilot is the PM-HX-3 for Digga RC4 combination bits, and it is worth noting that it is a hex rather than the square drive used on the A4 range — the two are not interchangeable... -
$30.00 Off
$298.99 List Price:
$328.99🏭Made in USA since 1981 🔨Replaceable wear part 🔒Genuine Star part 📘 Overview Auger teeth replacement on a T-post auger means one part: the Star Industries 160A-P10, the 2 inch replaceable carbide cutting head for the 160A-TP2 T-post auger. It is the part that... -
$3.00 Off
$28.99 List Price:
$31.99Made in USA Direct fit Overview This auger pilot tooth is the DP-C1HDLR, at the centre of a Digga DR6 rock auger head. On a dedicated rock auger the pilot takes a harder job than on any earth bit: it meets undisturbed rock at... -
$1.00 Off
$5.99 List Price:
$6.99Made in USA Direct fit Overview The TS-C-1 is the inner auger teeth position on Digga A4 earth auger bits — the teeth working closest to the pilot, in the inner pockets of the cutting head. They see less travel per revolution than the... -
$48.00 Off
$476.99 List Price:
$524.99Pengo by Paladin Three drill points Fits Aggressor & TriMax Overview This Pengo hardface carbide auger pilot bit — the HardFace Carbide TriFlow Auger Bit Pilot Tooth (TF-350HFTC, part number 135092) — is the pilot that leads a Pengo auger into the ground. It... -
$0.10 Off
$0.99 List Price:
$1.09A retaining pin is a small part with an important job: holding a compatible tooth in place on an auger bit. The Digga A4 Truloc Single Pin (SKU WP-000271) is a replacement tooth-retaining pin for Digga A4 auger bits. Select it when servicing a... -
$72.00 Off
$3,518.99 List Price:
$3,590.99Extend drilling reach with the Digga XT40 When a job requires a deeper bore than the auger flight alone can reach, the XT40 Heavy Duty Auger Inner Extension adds length between a compatible drive and auger. This genuine Digga attachment accessory is the 6-foot... -
$2.50 Off
$24.99 List Price:
$27.49Digga Trencher Replacement Components When wear behind the trencher chain begins to affect operation or material clearance, replacing the appropriate components can help return the assembly to service. These Digga trencher replacement components are intended for servicing key wear areas on compatible Digga trenchers.... -
$1.30 Off
$12.99 List Price:
$14.29Genuine Digga wear parts Sold individually Overview These are the replacement trencher teeth for Digga Bigfoot chains — Diggatac carbide teeth and cup teeth, in both chain pitches. Pick your chain pitch first: 1-5/8" Pitch (Bigfoot) or 2" Pitch (Bigfoot XD). Then pick the... -
$4.40 Off
$43.99 List Price:
$48.39Digga RC11 Triple Tungsten Auger Tooth – TTL-3 Maintain a compatible Digga RC11 auger bit with the genuine TTL-3 Triple Tungsten Auger Tooth. This individual replacement tooth is designed for the RC11 bit and provides a service-part option when a worn or damaged tooth... -
$97.00 Off
$4,743.99 List Price:
$4,840.99Integrated flow reversal at the auger drive Reverse an auger’s rotation from the machine cab with the Digga Integrated 2-Way Flow Valve for DDS & DLS Auger Drives. Designed to bolt directly to the top-port hydraulic motor, this flow reversal valve places the control... -
$31.00 Off
$1,499.99 List Price:
$1,530.99Digga External 2-Way Flow Valve Kit, 32 GPM Max Give a compatible excavator’s single-direction hammer circuit two-way flow with the Digga External 2-Way Flow Valve Kit. Rated for flow up to 32 GPM, this external valve kit is designed to reverse hydraulic flow for... -
$322.50 Off
$3,224.99 List Price:
$3,547.49Standard and high definition 12V and 24V supply cable Overview The DiggAlign auger alignment system is Digga's inclinometer for drilling, screw piling and core barrelling, built for contractors where accuracy is the job. It shows the operator on an in-cab display when the top... -
$1.20 Off
$11.99 List Price:
$13.19Genuine Digga HALO parts Fits every HALO-equipped Digga drive Overview These Digga HALO battery and power kits keep a HALO auger alignment system running, or add the cable-free battery option to a drive that came with the standard cab cable. HALO is the ring... -
$54.00 Off
$2,606.99 List Price:
$2,660.99Digga External 2-Way Flow Valve Kit — 80 GPM Maximum When a hydraulic attachment requires flow reversal, the Digga External 2-Way Flow Valve Kit provides a practical way to switch circuit direction on high-flow equipment. Rated for up to 80 GPM, this external valve... -
$65.20 Off
$651.99 List Price:
$717.19Genuine Digga 2 inch pitch chain Earth, Combo, Diggatac or bare Overview This is the Digga trencher chain replacement for 2 inch pitch Bigfoot XD trenchers — the XD 900, XD 1200 and XD 1500 models sold here as the Bigfoot trencher (2 inch... -
$28.50 Off
$284.99 List Price:
$313.49Digga Bigfoot Trencher Replacement Chain, 1-5/8-Inch Pitch When a trencher chain is worn or damaged, matching the replacement to the machine’s pitch and tooth configuration is essential. This genuine Digga replacement chain is specified for 1-5/8-inch pitch Bigfoot trenchers, including the Bigfoot Mini Skid... -
$41.00 Off
$400.99 List Price:
$441.99🏭Made in USA since 1981 🔒5-year factory guarantee 🔨Protective sleeve fitted 📘 Overview The Star Industries 160HK auger hose kit connects an auger drive to your machine auxiliary hydraulics. It includes two 1/2 inch by 96 inch hoses in a protective sleeve, fitted with... -
$3.00 Off
$100.99 List Price:
$103.99Made in USA 12-mo warranty Overview This 2 speed auger drive controller is a joystick-mounted toggle switch, which puts the speed change under the thumb of the hand already on the control. On a drive where you shift between high torque and high speed...
- Skid Steer
- Skid Steer
- Go to Skid Steer
- 3 Point Adapters
- Accessories
- Attachment Racks
- Augers
- Backhoes
- Bale Handlers
- Bale Spears
- Booms & Jibs
- Box Grader
- Box Scraper
- Breakers
- Brooms & Sweepers
- Brush Cutters
- Buckets
- Cold Planers
- Concrete Equipment
- Concrete Mixers
- Concrete Pumps
- Concrete Saw
- Dozer Blades
- Electrical Accessories
- Feed Pusher
- Fence Installer
- Graders
- Grapple Rake
- Grapples
- Hoppers
- Land Planes
- Landscape Rake
- Log Splitters
- Mulchers
- Pallet Forks
- Paver Attachment
- Planers & Graders
- Post & Tree Pullers
- Post Drivers
- Power Rakes
- Replacement Doors & Windows
- Rotary Tillers
- Rotating Attachment
- Salt Spreaders
- Snow Blowers
- Snow Plows
- Snow Pushers
- Sod Rollers
- Storage
- Stump Grinders
- Trailer Movers
- Tree Puller
- Tree Shears
- Tree Spades
- Trenchers
- Vibratory Rollers
- Work Platforms
- Mini Skid Steer
- Mini Skid Steer
- Go to Mini Skid Steer
- Accessories
- Augers
- Backhoes
- Brooms & Sweepers
- Brush Cutters
- Buckets
- Concrete Breakers
- Dozer Blades
- Electrical Accessories
- Grapple Rake
- Grapples
- Hitches
- Land Planes
- Log Grapples
- Mounting Plates
- Pallet Forks
- Rotary Tillers
- Snow Attachments
- Sod Rollers
- Stump Grinders
- Trenchers
- Excavator
- Excavator
- Go to Excavator
- Accessories
- Adapters
- Augers
- Breaker Hammers
- Brush Cutters
- Buckets
- Cold Planers
- Electrical Accessories
- Grading Beam
- Grapples
- Hydraulic Thumb
- Log Splitters
- Mulchers
- Part & Accessories
- Plate Compactors
- Post Drivers
- Quick Couplers
- Replacement Doors & Windows
- Rigid Thumb
- Ripper
- Root Rakes
- Screening Buckets
- Tree Grubbers
- Telehandler
- Tractor
- Shop By Brand
- Shop By Brand
- Go to Shop By Brand
- Amulet
- Anbo
- Bradco
- Cardinal Canvas Products
- Depco
- Digga
- Equipment Lock
- EZ SPOT UR
- FFC
- Haugen Attachments
- Ideal Rockaway
- Maxx Attachments
- McLaren Industries
- Paladin Heavy
- Pengo Attachments
- Quality Chain
- Roadrunner
- Shields
- Skeer
- Skid Steer Genius
- Stanley
- Star Industries
- Strike Force
- The Silt Fence Plow
- Top Dog Attachments
- Ventures Equipment
- WAIN ROY
![]()
- Blog
Backhoe Loader Auger Parts
SHOP BACKHOE LOADER AUGER PARTS BY TYPE
Most relevant
- Featured
- Most relevant
- Best selling
- Alphabetically, A-Z
- Alphabetically, Z-A
- Price, low to high
- Price, high to low
- Date, old to new
- Date, new to old
Sort
Results: 41
Filters
Sort by:
- Featured
- Most relevant
- Best selling
- Alphabetically, A-Z
- Alphabetically, Z-A
- Price, low to high
- Price, high to low
- Date, old to new
- Date, new to old
Sort & Filter
Categories
- 3 Point Adapters
- Amulet Manufacturing
- Anbo
- Anti-Theft Locks & Security Devices for Heavy Equipment
- Attachment Plates And Adapter Systems
- Attachment Racks
- Attachment Racks
- Attachments
- Auger Parts
- Backhoe Loader
- Backhoe Loader Accessories
- Backhoe Loader Auger Parts
- Backhoe Loader Buckets
- Backhoe Loader Grapples
- Backhoe Loader Quick Couplers
- Backhoe Loader Replacement Doors & Windows
- Bale Handlers
- Beach Cleaning Machine Attachments
- Best selling products
- Blue Diamond
Customers Also Viewed
CUSTOMER SUPPORT
If you need support, we’re here to help.
Mon-Fri: 8am-4:30pm CT
Sat-Sun: Closed
You can also email us for customer service or product support.
support@eskidsteer.com
Call or Text
To place a new order or for assistance with an existing order call or text us at
+1 (866) 757-8337
Live Chat
Have questions or need help?
Chat with us using the icon in the bottom left.
Start new chat
- Choosing a selection results in a full page refresh.