Fits
Digga RC11 auger bits
Type
Triple tungsten taper tooth
Part number
TTL-3
Guaranteed Fit
Fast Shipping
Hassle-Free Returns
Description
Digga RC11 Triple Tungsten Auger Tooth – TTL-3
Maintain a compatible Digga RC11 auger bit with the genuine TTL-3 Triple Tungsten Auger Tooth. This individual replacement tooth is designed for the RC11 bit and provides a service-part option when a worn or damaged tooth needs replacement. Confirming the part number and tooth profile before installation helps keep the replacement aligned with the auger bit’s intended configuration.
The triple-tungsten taper design identifies this tooth within Digga’s RC11 rock-auger tooth range. The tungsten-equipped cutting end is intended for demanding ground-engaging work, while the tapered profile supports the tooth’s fit at its designated position on the bit. Exact dimensions, tungsten composition, and performance ratings are not provided for this listing, so verify the application against the existing tooth or Digga parts information rather than relying on appearance alone.
Fit and application
This auger part is specified for Digga RC11 auger bits. It is not identified as a universal tooth, and compatibility with other Digga bit series or other manufacturers’ augers is not confirmed. Before ordering, check the auger bit model, the tooth location and profile, and the part number stamped or listed for the required replacement. Matching these details is especially important when a bit uses more than one tooth style or position.
For skid steer and excavator operators, replacing the correct wear component helps keep the auger assembly configured for its intended digging application. A tooth that does not match the holder or cutting position may not seat correctly. If the existing tooth is difficult to identify, compare it with the RC11 bit documentation or confirm the required part with a qualified equipment or parts specialist.
Replacement and inspection
Inspect the tooth and its mounting area before fitting a replacement. Remove accumulated soil or debris as needed to check the holder, retaining components and surrounding bit for damage or excessive wear. Install the TTL-3 only in the position and manner specified for the compatible RC11 bit. Follow the auger manufacturer’s instructions and the applicable equipment safety procedures; this listing does not include installation hardware or instructions unless separately specified.
After installation, check that the tooth is seated and retained correctly before returning the auger to service. Inspect the tooth and holder periodically during use, particularly when working in abrasive or rocky material. Replace worn parts according to the manufacturer’s guidance. Routine inspection can help identify wear or damage before it affects the condition of adjacent components, though service life depends on material, operating conditions and maintenance.
Ordering details
The TTL-3 is sold individually, not as a complete tooth set or auger-bit assembly. Determine the number of teeth required from the RC11 bit configuration and the condition of each position. The listed price is $43.99 per tooth. No pack quantity, mounting hardware, warranty coverage, or service-life estimate is specified in the product information; check the current listing or contact eSkidSteer for details if any of these affect the order.
This part is listed among eSkidSteer’s auger parts and skid steer attachment parts. As a specialized attachment component, it is intended to support maintenance of compatible heavy-equipment tooling rather than replace the auger bit itself. It is suitable to consider when the required part has been identified as Digga TTL-3 for an RC11 bit; it should not be selected solely because an auger is described generally as a rock auger.
eSkidSteer serves equipment owners and operators shopping for attachments, parts and accessories for machines including skid steers and excavators. For an accurate parts selection, have the auger model, existing tooth profile and required quantity available when checking fit. This practical confirmation is preferable to assuming compatibility across models, since the product details identify the RC11 application specifically.
Choose the Digga TTL-3 when replacing the triple tungsten taper tooth specified for a Digga RC11 auger bit. Verify the model and position, account for the individual-unit quantity, and follow the manufacturer’s fitting and inspection guidance to return the compatible bit to service.
Shipping
The following are estimated processing and delivery times. We make every effort to fulfill orders as quickly as possible.
We only deliver within the United States. If a package can’t be delivered due to an error entering your shipping address, Eskidsteer is not responsible for any additional fees that may incur to reroute or reship the package.
By placing an order through this Website you will be agreeing to the terms below. These are provided to ensure both parties are aware of and agree upon this arrangement to mutually protect and set expectations for our service. Please read our Terms of Service.
How do I place an order?
We do not take orders on the phone for security reasons. To place an order, go to a product page, select the desired quantity of the item, and add it to your cart via the “Add to Cart” button. During checkout, you just need to enter or confirm your shipping address and credit card information, then you can place your order
Shipping fee:
Delivery Time= Handling time +Transit Time:
Handling time: 3-3 Days
Transit time: 5-8Days
Order cut off Time: 5:00 PM (GMT-05:00) Eastern Standard Time (New York)
Which shipping carriers do you use to ship?
All Shipments are done with LTL Carriers, UPS, FedEx, DHL, and USPS
Failure to Accept Products on Delivery
If you reject delivery of goods ordered from us, or otherwise fail to accept delivery of the goods, you agree to pay for all related and additional shipping fees, duties, taxes, restocking fees and other charges arising from such failure to accept delivery. After such failure to accept delivery of the goods, it shall be your responsibility to pay for and arrange a new shipping date.
Tracking Information:
We also provide tracking numbers for all orders. Once your order has been shipped, we will provide you with a tracking number that you can use to track the progress of your package. You will receive this tracking number via email.
We understand the importance of knowing the status of your order, and we strive to provide you with transparent and reliable tracking information. If you have any questions or need assistance with tracking your order, please don’t hesitate to contact our customer support team. We’re here to help!.
Can I ship to multiple addresses?
At this time, we cannot ship to multiple addresses in one order. Please place separate orders on support@eSkidsteer.com to ship to different addresses. If you need assistance, please contact our Customer Service.
Wrong Address:
Please review and ensure that you have entered the correct address. We are not responsible for non-delivery due to errors in the address that you provide. If an order is returned due to an incorrect address, we will refund the original order (excluding the shipping fee) and ask that you re-submit your order.
Change of Address:
If your item hasn’t yet been shipped, you may change your delivery address by emailing at support@eSkidsteer.com. Please note that we are not obligated to ensure changes to the delivery address after the item has been delivered.
If you have any questions or require further assistance regarding the shipping policy, please do not hesitate to contact our customer support team.
Phone: +1 8667578337
Email: support@eSkidsteer.com
Address: 30 North Gould St Suite R, Sheridan, WY 82801, USA
Returns
Returns
We offer returns and exchanges in limited circumstances as follows:
- In order to submit a return, you must contact us by email at support@eSkidsteer.com for us to confirm the items ordered are eligible for return or exchange;
- To be eligible for a return, you must commence the return process within 30 days of your item being delivered to you and:
- it must be unused, for example, once an item is hooked up to an attachment plate, hydraulic lines or electrical connection, it will not be eligible for return. Likewise, if your item shows any sign of use, which we may determine in our sole and absolute discretion, we will not accept the return;
- it must be in the same condition you received it in. You will be required to send us timestamped photos of the condition of your items as a condition to determine your eligibility for the return or exchange; and
- it must be returned in the same packaging or containers as it was received in.
We do not accept returns for products that were listed as final sale items at the time of purchase.
You agree to pay a 25% restocking fee on all returns, which we will deduct from any refund owing to you.
After the above referenced 30-day period, unfortunately we cannot offer you a refund or exchange, under any circumstances.
If your return or exchange is approved, we will provide instructions on shipping your items back to us or the applicable supplier via email.
You agree that you shall be responsible for all return shipping costs and related expenses.
Our shipping cost to you is not refundable.
You are also responsible for ensuring the items are carefully packaged for shipment and that risk of loss or damage during return shipping shall be your sole liability. You may wish to obtain insurance while the returned items are in transit.
Lost or Damaged
If the item is damaged when you receive it, do not sign the proof of delivery, and contact us immediately at support@eSkidsteer.com. If you sign the proof of delivery form, you cannot later claim the item was lost (i.e. not delivered) or damaged on arrival.
If the item is damaged on arrival take photos of the damage with a time stamp.
In the event the item is lost or damaged on arrival, we will assist you with filing a reimbursement claim directly with the applicable supplier or shipping company as applicable. However, you agree that as we are not the direct supplier of the items, it shall be your responsibility to pursue any claims with the applicable supplier in the event your lost or damaged item is not replaced by the supplier or carrier.
No Warranties Offered by Us
Everything on the Website, including all products available for order, are provided "as is" without warranty of any kind from us, including all implied warranties and conditions of merchantability and fitness for a particular purpose. We hereby disclaim all warranties and conditions of any kind, whether express, implied or statutory.
You acknowledge that we do not manufacture the products made for sale on the Website and that such products and the individual components thereof, are made by third party manufacturers.
Warranties Offered by Third Parties
Our third party suppliers and manufacturers may offer limited warranties on certain products sold on the Website. You may contact us and we can refer you to the applicable supplier or manufacturer if you wish to inquire about the details of any such warranties offered by those third parties. You agree that we shall not be liable or responsible for any warranties granted by such third parties.
To the extent products you order from us have warranties provided by a third party supplier or manufacturer, upon your request we agree to reasonably assist with the submission of warranty claims to such third parties. However, we make no guarantees that any warranty claims will be successful. You agree it is your responsibility to ensure warranty claims are submitted within the applicable timeframe to the applicable supplier or manufacturer.
- Choosing a selection results in a full page refresh.