-
$14.00 Off
$132.99 List Price:
$146.99Pengo by Paladin Three drill points Fits Aggressor & TriMax Overview This Pengo carbide tipped auger pilot bit — the Carbide Tipped Triflow Auger Bit Pilot Tooth (TF-350C, part number 135090) — is the pilot that leads a Pengo auger into the ground. It... -
$6.00 Off
$54.99 List Price:
$60.99🔎OEM interchange 📦Crated 📘 Overview Bobcat cab glass replacement — left Hand Sliding Cab Glass — the Bobcat replacement for OEM 7266740, cut to 15.5" X 19". It covers 4 published Bobcat models, listed in full further down this page. The pane installs into... -
$18.00 Off
$122.99 List Price:
$140.99🔧Activates high flow circuit 🔌Plugs into the 14 pin connector 🚜Cat D-Series, Next Gen, Develon 📘 Overview The SG-CTHF-14 high flow plug activates the high-flow hydraulic circuit on Caterpillar D-Series, Next Gen and Develon skid steer loaders. It installs into the machine's 14-pin connector... -
$60.00 Off
$593.99 List Price:
$653.99260× stronger than the glass it replaces — at half the weight. SHIELDS® Lexan® polycarbonate, formed to the exact shape of your Bobcat windshield. Drops into the factory opening, reuses your existing hardware, and stays in the frame when something hits it. ✓ Guaranteed... -
$8.51 Off
$85.99 List Price:
$94.50🔎OEM interchange 🔧Complete kit 📘 Overview John deere skid steer bucket pin kit replacement — john Deere skid steer pin kit — built to the OEM T342204K specification. It covers 13 published John Deere models, listed in full further down this page. Every component... -
$10.00 Off
$63.99 List Price:
$73.99🔩All sockets and seals 🔧Attachment side 🚜John Deere 3 pin 📘 Overview A complete Deutsch HD 3-pin female connector kit for the John Deere round attachment-side connector. Sockets, seals and body components are all included for a full build or rebuild. It is the... -
$35.00 Off
$348.99 List Price:
$383.99🔗Converts between standards 📘 Overview Haugen skid steer auger bits in five series, sized 4" to 48", in 2" Hex or 2 9/16" Round shaft. The series is chosen by ground condition, not by preference — a fabricated head in rock will not last,... -
$6.00 Off
$51.99 List Price:
$57.99🔎OEM interchange 🏭Aftermarket 📘 Overview John deere mirror — john Deere excavator mirror replaces OEM 4675257 and fits the original mounting. The head mounts to the arm and bracket already fitted to the machine, so no new mounting hardware is needed. Sold as a... -
$242.00 Off
$2,411.99 List Price:
$2,653.99🏭Made in USA 🔒1-year warranty ⚙No hydraulics required 📘 Overview The Haugen telehandler to skid steer adapter (Tele-Tach) is a skid steer adapter plate that fits your telehandler's carriage and presents a Universal Skid Steer Quick Attach face, so ground-engaging skid steer attachments will... -
$3.00 Off
$25.99 List Price:
$28.99Pengo by Paladin Soil rating 5–6 Exclusive to the BoRH head Overview These Pengo rock auger bullet teeth — the P21 RR conical tooth, stocked as PG-137990 — are designed exclusively for the Pengo BoRH bolt-on rock head. Each tooth weighs 0.59 lb and... -
$139.00 Off
$931.99 List Price:
$1,070.99🔧6 switched outputs 🔌Plugs into 7 pin Trident 🚜Loaders, Toolcat, Versahandler 📘 Overview The SG-CAN60-14 lets a Bobcat 7-pin CAN machine run attachments that were never built to speak Bobcat's control language. It plugs into the 7-pin Trident connector, reads the CAN messages your... -
$43.00 Off
$289.99 List Price:
$332.99🔌Plug and play 🔧2 switched ports 🚜Fits most 14 pin loaders 📘 Overview The SG-BC14-JD03A lets a 14-pin loader run John Deere 3-pin controlled attachments. The 14-pin end plugs into the machine, the round John Deere 3-pin end plugs into the attachment, and two... -
$51.00 Off
$343.99 List Price:
$394.99🔧2 switched outputs 📅SVL machines before 2018 🔌Genuine Deutsch connectors 📘 Overview The SG-KB-01 is the machine-side control harness for Kubota SVL75, SVL90 and SVL95 compact track loaders built before 2018. It provides two switched outputs, a keyed 12-volt supply and a ground, installs... -
$11.00 Off
$103.99 List Price:
$114.99🔎OEM interchange 🔧Complete kit 📘 Overview John deere bucket pin kit replacement — pin Kit — the John Deere replacement for OEM T259580PK. It covers 5 published John Deere models, listed in full further down this page. Every component interchanges with the original, so... -
$5.00 Off
$334.95 List Price:
$339.95Machine: Case Skid Steer LoaderMaterial: Heavy-duty vinyl-coated nylon | 40-mil clear vinyl windowsDoor: Included — full-size vinyl window + cold-weather bottom flapInstallation: Installs in minutes — no drilling or permanent modifications 📋 Overview Keep your Case Skid Steer Loader operator dry, warm, and productive... -
$9.00 Off
$396.99 List Price:
$405.99Made in USA 12-mo warranty Overview These are Digga’s auger extension outer bars, fitting between the drive and the auger bit to add drilling depth without buying a longer auger. Two hub sizes are covered: 2" hex in 2, 3, 4, 6 and 8... -
$2.00 Off
$14.99 List Price:
$16.99Pengo by Paladin Soil rating 5–6 Severe Rock Ripper standard Overview These Pengo rock auger teeth — the S-RL08 standard rock tooth, stocked as PG-990021 — are the conical teeth supplied as standard on the Pengo Severe Rock Ripper auger. Each weighs 0.7 lb... -
$1.00 Off
$32.99 List Price:
$33.99Made in USA Direct fit Overview Of the auger teeth on a Digga A4 cutting head, the TS-3 outer tooth is the one that wears fastest. The outer position travels the largest circumference per revolution, so it covers more ground and more material than... -
$60.00 Off
$591.99 List Price:
$651.99260× stronger than the glass it replaces — at half the weight. SHIELDS® Lexan® polycarbonate, formed to the exact shape of your CAT windshield. Drops into the factory opening, reuses your existing hardware, and stays in the frame when something hits it. ✓ Guaranteed... -
$8.00 Off
$70.99 List Price:
$78.99🔎OEM interchange 🏭Aftermarket 📘 Overview Komatsu wheel loader mirror replacement — this Komatsu wheel loader mirror carries the OEM 421-54-65720 fit and mounting pattern. It covers 5 published Komatsu models, listed in full further down this page. The head mounts to the arm and...













