-
$180.00 Off
$8,820.99 List Price:
$9,000.995-yr gearbox warranty 3-yr motor warranty Lifetime shaft pull-out cover Overview The two-speed 5DDT excavator auger attachment produces 4,068 ft-lbs at 3,000 PSI and shifts between torque and speed while drilling, without lifting out of the hole. It is sold here with the mount... -
$107.00 Off
$5,233.99 List Price:
$5,340.995-yr gearbox warranty 3-yr motor warranty Lifetime shaft pull-out cover Overview With 6,164 ft-lbs and a 48 inch ceiling in earth, this 7DDS excavator auger attachment is the largest single-speed drive Digga offers for 4.5 to 8 tonne excavators and backhoes. It is sold... -
$106.00 Off
$5,194.99 List Price:
$5,300.995-yr gearbox warranty 3-yr motor warranty Lifetime shaft pull-out cover Overview This 6DDS excavator auger attachment carries 4,911 ft-lbs at 3,000 PSI and reaches 30 inches in clay and shale, the specification that usually decides whether a hole gets drilled in stiff ground. It... -
$105.00 Off
$5,145.99 List Price:
$5,250.995-yr gearbox warranty 3-yr motor warranty Lifetime shaft pull-out cover Overview Sized for 4.5 to 8 tonne machines, this 5DDS excavator auger attachment brings 3,904 ft-lbs at 3,000 PSI and runs from 10 GPM, the lowest flow demand of any drive in this class.... -
$91.00 Off
$309.99 List Price:
$400.9960" Class II Pallet Fork, 5,500 lb Capacity The 60" Class II Pallet Fork is designed for skid steer operators who need a dependable attachment component for pallet handling, material transport, and general jobsite work. With a rated capacity of 5,500 lbs, this fork... -
$131.00 Off
$1,314.99 List Price:
$1,445.99Heavy Duty Frame (5500 lbs) Skid Steer Pallet Forks Heavy materials require a pallet fork frame built for controlled, repeatable handling. The Heavy Duty Frame (5500 lbs) provides a robust platform for moving palletized supplies, bundled materials, equipment, and jobsite loads with a skid steer.... -
$78.00 Off
$785.99 List Price:
$863.99Walk Through Pallet Fork Frame Only (5500 lbs) The Walk Through Pallet Fork Frame is a heavy-duty skid steer pallet fork attachment designed for moving palletized materials, bundled supplies, equipment, and other loads with controlled, efficient handling. With a rated capacity of 5,500 pounds, this... -
$19.11 Off
$191.10 List Price:
$210.21🔧Controls for imported attachments 🔌Every machine connector type 🚜Any skid steer or track loader 📘 Overview Your attachment arrived from an auction and there are no controls with it — or there is a crane-style controller you are expected to wire and operate yourself.... -
$611.00 Off
$6,110.03 List Price:
$6,721.03🏭Made in USA 🔩Hardox 450 teeth 🔒1-year warranty 📘 Overview The Rockaway 4415 is a mini skid steer power rake that pulls 1/2" to 8" rocks out of the ground and conditions the soil in the same pass, on machines far too small for... -
$4.00 Off
$34.99 List Price:
$38.99📏26 feet 🔌camera connector to display connector 📹SG-SX-50 camera system 📘 Overview The SG-SX-50-EXC is a 26 feet extension cable with a camera connector on one end and a display connector on the other. It extends the run between a rear-mounted camera and the... -
$2,406.00 Off
$24,050.99 List Price:
$26,456.99🔒1-year warranty ⚡220 V, 3-phase 📘 Overview A grout mixer and pump in one chassis, the Ventures Equipment SureMix mixing pump is a self-contained machine with no mount and no host loader. It mixes pre-blended bagged material and pumps it up to 300 ft... -
$5,320.00 Off
$53,194.99 List Price:
$58,514.99🏭Made in USA 🔒1-year warranty 📘 Overview Built as a 3D concrete printing machine and as a general-purpose progressive cavity grout pump, the Ventures Equipment concrete printing pump system (VE3D) feeds a printer or a placement hose at 10-12 cubic yards an hour through... -
$2,310.00 Off
$23,092.99 List Price:
$25,402.99🔒1-year warranty ⚡220 V, 3-phase 📘 Overview This Ventures Equipment mixing pump (VE4) is a self-contained machine with no mount and no host loader: it mixes and pumps in one pass at up to 200 bags an hour and delivers material up to 200... -
$2,017.00 Off
$20,166.99 List Price:
$22,183.99🏭Made in USA 🔒1-year warranty 📘 Overview Ordered as a skid steer concrete pump, a self-powered skid unit or a towable road trailer, the Ventures Equipment concrete grout pump (3/8 Special) moves 10-12 cubic yards an hour through a 4 in. heavy-duty outlet and... -
$191.00 Off
$1,904.99 List Price:
$2,095.99📘 Overview The Blue Diamond Mini Fork Grapple is a mini-machine set of skid steer grapple forks that carry and clamp brush, logs, and debris on compact carriers. It mounts to a mini quick-attach plate, pairing pallet-style tines with a hydraulic top grapple so... -
$26.00 Off
$171.99 List Price:
$197.99🔁Forward and reverse ⚡12V DC motors 🧰Configurable kit 📘 Overview The SG-BDMC1-100 is a single-channel bi-directional motor controller for reversible 12-volt DC motors on skid steer attachments. It drives one motor with full forward and reverse control — suiting electric actuators, small winches and... -
$43.00 Off
$289.99 List Price:
$332.99🔦Indicator light per pin 🔧Plugs inline 🚜14 pin Deutsch HD 📘 Overview The SG-SB-100 test box plugs inline between a machine port or controller and the attachment harness, and gives you an indicator light and test point for every pin. It turns "nothing happens... -
$3.00 Off
$19.99 List Price:
$22.99🔧CAN signal pins 🔩Trident 7 pin 🚜Bobcat connectors 📘 Overview A professional removal tool for the CAN signal pins in a Bobcat 7-pin Trident connector. The signal contacts are the small-diameter ones, and they need their own tool — a power-pin tool will not... -
$80.00 Off
$535.99 List Price:
$615.99🌬Buffalo Turbine blowers 🔧2 channel control 🎛Four kit options 📘 Overview A two-channel control kit for Buffalo Turbine blower attachments, giving dedicated electronic control of two blower functions from the machine. Four kit versions are offered, one per machine interface. Choose the kit that... -
$18.00 Off
$117.99 List Price:
$135.99🔩Standard rebuild 🔧Machine side 🚜Bobcat 7 pin Trident 📘 Overview The standard rebuild kit for the Bobcat 7-pin Trident female connector — the machine side. It includes the components needed to replace a damaged machine-side Trident connector without buying a complete harness. Optional tools...











