Description
🔒1-year warranty
⚡220 V, 3-phase
📘 Overview
This Ventures Equipment mixing pump (VE4) is a self-contained machine with no mount and no host loader: it mixes and pumps in one pass at up to 200 bags an hour and delivers material up to 200 ft from where it stands, on a single 220 V 3-phase supply. It is a plastering and dry-mortar machine rather than a concrete pump: fireproofing, self-levelling underlayment and topping compounds, grout, micro-trench reinstatement and LV spray work are what it is built around. The hopper takes 24 gallons of dry material and can be charged by hand from bags or fed pneumatically from a dry-mortar silo, so the same machine suits a two-man patch crew and a continuous silo-fed pour. A water pump is standard rather than an add-on, the worm pump changes without tools, and every function runs from one control panel. The mixing zone is a highly wear-resistant synthetic and the structural components are hot-dip galvanized. At 573 lb and 41 in. wide it is a single-configuration machine - there is no variant to choose - and it carries a 1-year limited warranty.
⚙ Key Features of the VE4 Mixing Pump
- Mixes and pumps in one machine at up to 200 bags per hour, removing the separate mixer and the crew member who tends it.
- 200 ft pumping distance from a single set-up, so one position covers most of a floor plate without breaking down and moving.
- Water pump included as standard - not a priced option, and the reason mix consistency does not depend on site water pressure.
- Tool-free quick-change worm pump - the highest-wear part on any rotor-stator machine comes off without a spanner, so a stator change is a break-time job.
- Every function on one control panel, which keeps training short on crews where the operator changes week to week.
- 24-gallon dry material hopper charged by hand from bags or fed pneumatically from a dry-mortar silo - the same machine covers patch work and continuous silo-fed pours.
- Modular construction for fast dismantling, transport and set-up, which is what gets a 573 lb machine into an occupied building.
- Wear-resistant synthetic mixing zone - it cleans down faster than a steel mixing chamber and resists the abrasion that shortens machine life on cementitious work.
- Hot-dip galvanized components for corrosion protection, which matters on a machine that is washed out with water at the end of every shift.
🔑 What the VE4 Mixing Pump Changes on Site
- Drop a person from the mixing station. Mixing and pumping happen in one machine at up to 200 bags an hour, so the crew member who would run a separate mixer works on placement instead.
- Set up once for most of a floor. 200 ft of pumping distance covers a large floor plate from one position, which removes the repeated break-down, move and re-prime cycle that eats a working day.
- Change a worm pump at break, not at end of shift. The tool-free quick-change device takes the highest-wear component off without tools.
- Run the same machine on bags and on silo. Manual bag charging and pneumatic dry-mortar feed are both standard, so a machine bought for patch work still fits when the job goes to continuous silo supply.
- Get it into an occupied building. Modular construction means it dismantles for transport and reassembles on site, which is how a 573 lb machine reaches an upper floor.
- Wash down faster. The synthetic mixing zone releases material that sticks to steel, so end-of-shift clean-down is shorter and the machine starts cleanly the next morning.
📊 VE4 Mixing Pump Specifications
| Specification | Value |
|---|---|
| Power requirement | 220 V, 3-phase |
| Output | Up to 200 bags per hour |
| Pumping distance | Up to 200 ft |
| Dry material hopper | 24 gallons |
| Dimensions | 41 in. W x 29 in. L x 56 in. H |
| Weight | 573 lb (estimated) |
| Water pump | Included as standard |
| Worm pump change | Tool-free quick-change device |
| Mixing zone | Highly wear-resistant synthetic material |
| Corrosion protection | Hot-dip galvanized components |
| Loading | Manual bag loading or pneumatic dry-mortar silo feed |
| Warranty | 1-year limited (initial user) |
🔗 Material and Feed Compatibility on the VE4
The VE4 runs pre-mixed dry mortar - material designed for machine application. The 24-gallon dry hopper is charged by hand from bags, or connected to a pneumatic dry-mortar delivery system for continuous silo feed. Both methods are standard on the machine; neither is a conversion.
A water pump is fitted as standard, so mix water is metered by the machine rather than drawn straight from a site tap at whatever pressure happens to be available. Material is delivered up to 200 ft from the machine through standard mortar hose.
Material suitability is set by the product manufacturer, not by the pump - check that your fireproofing, underlayment or render is approved for machine application before ordering.
🚜 What the VE4 Mixing Pump Needs on Site
The VE4 is a self-contained, mains-powered machine, not a skid steer or excavator attachment. There is no mount, no quick attach plate and no host machine - what determines whether it fits your job is electrical supply, access and working space.
| Site requirement | What the VE4 needs |
|---|---|
| Electrical supply | 220 V, 3-phase |
| Machine footprint | 41 in. wide x 29 in. long x 56 in. high |
| Weight | 573 lb (estimated) |
| Material delivery | Up to 200 ft from the machine position |
| Material loading | Manual bag charging, or pneumatic feed from a dry-mortar silo |
| Water | Site water supply - the machine's own water pump meters it |
Because it is modular, the VE4 dismantles for transport and reassembles on site, which is how it reaches upper floors and interiors that a one-piece machine of this weight cannot. Plan a route wide enough for a 41 in. body.
Confirm you have 220 V 3-phase power at or near the work area before ordering - single-phase supply will not run this machine, and that is the one requirement a generator hire cannot always solve on short notice.
Everything needed to size this machine to your site is on this page - add it to your cart to see delivered pricing for your address. If anything about the power supply or the access route still needs checking, we confirm it with you after the order is placed.
🔗 What the VE4 Mixing Pump Is Used For
The VE4 is bought as several machines at once: a fireproofing pump on steel-frame work, a self leveling underlayment pump on floor preparation, a grouting machine on repair contracts, and a plastering machine for renders and internal plasters. As a dry mortar pump it runs pre-blended bagged product, and as a mortar mixing machine it removes the separate mixer and the person who tends it.
- Fireproofing materials
- Self-levelling underlayment and topping compounds
- Grout pumping
- Reinstatement for micro-trenching
- LV spray application
- External renders and internal plasters suitable for machine use
🔗 What Else Pairs With the VE4 Mixing Pump
- SureMix dual mixing mortar and grout pump - 300 ft horizontal reach and a wireless remote where the VE4 offers 200 ft
- 3/8 Special concrete grout pump - for site-batched concrete with aggregate up to 3/8 in.
- Star Industries mortar buggies - for moving mixed material to the machine on sites the hose cannot reach
❓ VE4 Mixing Pump Questions, Answered
Inspect the VE4 before you sign. The machine ships crated by LTL freight. Check the control panel, the hopper and the galvanized frame for transit damage, and note anything you find on the Bill of Lading before the driver leaves - a signed clean BOL closes the carrier claim.
What power supply does the VE4 mixing pump need?
The VE4 mixing pump runs on 220 V, 3-phase power. Single-phase supply will not run the machine, so confirm 3-phase is available at or near the work area before ordering.
How far can the VE4 pump material?
The VE4 delivers material up to 200 ft from where the machine stands. Beyond that distance the machine needs to be repositioned.
What materials does the VE4 mixing pump handle?
The VE4 is built for pre-mixed dry mortar and cementitious products: fireproofing materials, self-levelling underlayment and topping compounds, grouts, micro-trenching reinstatement material, LV spray products, and external renders and internal plasters that are suitable for machine application.
Can the VE4 be fed from a silo?
Yes. The 24-gallon dry material hopper can be charged by hand from bags or supplied pneumatically through a dry-mortar delivery system. Both are standard capabilities, not conversions, so the machine covers small patch work and continuous silo-fed pours.
Is a water pump included with the VE4?
Yes. A water pump is fitted as standard on the VE4, so mix water is metered by the machine rather than depending on site water pressure.
How difficult is it to change the worm pump?
The VE4 uses a tool-free quick-change device for the worm pump, so the highest-wear component comes off without tools. All other functions are managed from a single control panel.
Will the VE4 fit through a doorway and up to an upper floor?
The VE4 measures 41 in. wide by 29 in. long by 56 in. high and weighs an estimated 573 lb. Its modular construction allows fast dismantling for transport and reassembly on site, which is how it is moved into interiors and to upper floors.
How is the VE4 protected against corrosion?
Hot-dip galvanized components provide corrosion protection, and the mixing zone is made from a highly wear-resistant synthetic material that cleans down more easily than steel and extends service life.
Is the VE4 mixing pump a skid steer attachment?
No. The VE4 is a self-contained, mains-powered machine with no quick attach plate, and the VE4 does not mount to a skid steer, loader or excavator. The machine requires a 220 V 3-phase supply and floor space, not a host machine.
What warranty comes with the VE4?
Ventures Equipment warrants the machine free of defects in material and workmanship for one year from delivery, to the initial user. Normal wear parts are excluded, including seals, rotors, stators, hoses, shaft couplings and connectors, pump shafts and filter elements.
How does the VE4 mixing pump ship?
Shipping is calculated at checkout - add the VE4 to your cart and enter your delivery address to see the freight charge before completing the order. The machine ships by LTL freight and lift gate service can be selected at checkout.
Shipping
The following are estimated processing and delivery times. We make every effort to fulfill orders as quickly as possible.
We only deliver within the United States. If a package can’t be delivered due to an error entering your shipping address, Eskidsteer is not responsible for any additional fees that may incur to reroute or reship the package.
By placing an order through this Website you will be agreeing to the terms below. These are provided to ensure both parties are aware of and agree upon this arrangement to mutually protect and set expectations for our service. Please read our Terms of Service.
How do I place an order?
We do not take orders on the phone for security reasons. To place an order, go to a product page, select the desired quantity of the item, and add it to your cart via the “Add to Cart” button. During checkout, you just need to enter or confirm your shipping address and credit card information, then you can place your order
Shipping fee:
Delivery Time= Handling time +Transit Time:
Handling time: 3-3 Days
Transit time: 5-8Days
Order cut off Time: 5:00 PM (GMT-05:00) Eastern Standard Time (New York)
Which shipping carriers do you use to ship?
All Shipments are done with LTL Carriers, UPS, FedEx, DHL, and USPS
Failure to Accept Products on Delivery
If you reject delivery of goods ordered from us, or otherwise fail to accept delivery of the goods, you agree to pay for all related and additional shipping fees, duties, taxes, restocking fees and other charges arising from such failure to accept delivery. After such failure to accept delivery of the goods, it shall be your responsibility to pay for and arrange a new shipping date.
Tracking Information:
We also provide tracking numbers for all orders. Once your order has been shipped, we will provide you with a tracking number that you can use to track the progress of your package. You will receive this tracking number via email.
We understand the importance of knowing the status of your order, and we strive to provide you with transparent and reliable tracking information. If you have any questions or need assistance with tracking your order, please don’t hesitate to contact our customer support team. We’re here to help!.
Can I ship to multiple addresses?
At this time, we cannot ship to multiple addresses in one order. Please place separate orders on support@eSkidsteer.com to ship to different addresses. If you need assistance, please contact our Customer Service.
Wrong Address:
Please review and ensure that you have entered the correct address. We are not responsible for non-delivery due to errors in the address that you provide. If an order is returned due to an incorrect address, we will refund the original order (excluding the shipping fee) and ask that you re-submit your order.
Change of Address:
If your item hasn’t yet been shipped, you may change your delivery address by emailing at support@eSkidsteer.com. Please note that we are not obligated to ensure changes to the delivery address after the item has been delivered.
If you have any questions or require further assistance regarding the shipping policy, please do not hesitate to contact our customer support team.
Phone: +1 8667578337
Email: support@eSkidsteer.com
Address: 30 North Gould St Suite R, Sheridan, WY 82801, USA
Returns
Returns
We offer returns and exchanges in limited circumstances as follows:
- In order to submit a return, you must contact us by email at support@eSkidsteer.com for us to confirm the items ordered are eligible for return or exchange;
- To be eligible for a return, you must commence the return process within 30 days of your item being delivered to you and:
- it must be unused, for example, once an item is hooked up to an attachment plate, hydraulic lines or electrical connection, it will not be eligible for return. Likewise, if your item shows any sign of use, which we may determine in our sole and absolute discretion, we will not accept the return;
- it must be in the same condition you received it in. You will be required to send us timestamped photos of the condition of your items as a condition to determine your eligibility for the return or exchange; and
- it must be returned in the same packaging or containers as it was received in.
We do not accept returns for products that were listed as final sale items at the time of purchase.
You agree to pay a 25% restocking fee on all returns, which we will deduct from any refund owing to you.
After the above referenced 30-day period, unfortunately we cannot offer you a refund or exchange, under any circumstances.
If your return or exchange is approved, we will provide instructions on shipping your items back to us or the applicable supplier via email.
You agree that you shall be responsible for all return shipping costs and related expenses.
Our shipping cost to you is not refundable.
You are also responsible for ensuring the items are carefully packaged for shipment and that risk of loss or damage during return shipping shall be your sole liability. You may wish to obtain insurance while the returned items are in transit.
Lost or Damaged
If the item is damaged when you receive it, do not sign the proof of delivery, and contact us immediately at support@eSkidsteer.com. If you sign the proof of delivery form, you cannot later claim the item was lost (i.e. not delivered) or damaged on arrival.
If the item is damaged on arrival take photos of the damage with a time stamp.
In the event the item is lost or damaged on arrival, we will assist you with filing a reimbursement claim directly with the applicable supplier or shipping company as applicable. However, you agree that as we are not the direct supplier of the items, it shall be your responsibility to pursue any claims with the applicable supplier in the event your lost or damaged item is not replaced by the supplier or carrier.
No Warranties Offered by Us
Everything on the Website, including all products available for order, are provided "as is" without warranty of any kind from us, including all implied warranties and conditions of merchantability and fitness for a particular purpose. We hereby disclaim all warranties and conditions of any kind, whether express, implied or statutory.
You acknowledge that we do not manufacture the products made for sale on the Website and that such products and the individual components thereof, are made by third party manufacturers.
Warranties Offered by Third Parties
Our third party suppliers and manufacturers may offer limited warranties on certain products sold on the Website. You may contact us and we can refer you to the applicable supplier or manufacturer if you wish to inquire about the details of any such warranties offered by those third parties. You agree that we shall not be liable or responsible for any warranties granted by such third parties.
To the extent products you order from us have warranties provided by a third party supplier or manufacturer, upon your request we agree to reasonably assist with the submission of warranty claims to such third parties. However, we make no guarantees that any warranty claims will be successful. You agree it is your responsibility to ensure warranty claims are submitted within the applicable timeframe to the applicable supplier or manufacturer.
- Choosing a selection results in a full page refresh.