-
$32.00 Off
$210.99 List Price:
$242.99🔧2 spade lug outputs 📏9 foot harness 🚜John Deere 3 pin 📘 Overview A nine-foot harness running from a John Deere 3-pin round machine connector to two standard spade lug terminals on the attachment side. It is for solenoid-controlled attachments whose connections are bare... -
$60.00 Off
$591.99 List Price:
$651.99260× stronger than the glass it replaces — at half the weight. SHIELDS® Lexan® polycarbonate, formed to the exact shape of your Bobcat windshield. Drops into the factory opening, reuses your existing hardware, and stays in the frame when something hits it. ✓ Guaranteed... -
$60.00 Off
$591.99 List Price:
$651.99260× stronger than the glass it replaces — at half the weight. SHIELDS® Lexan® polycarbonate, formed to the exact shape of your John Deere windshield. Drops into the factory opening, reuses your existing hardware, and stays in the frame when something hits it. ✓... -
$18.00 Off
$178.99 List Price:
$196.99🔎OEM interchange 📦Crated 📘 Overview Bobcat windshield replacement — front Windshield — the Bobcat replacement for OEM 7120401, cut to 41.5" X 13". It covers 23 published Bobcat models, listed in full further down this page. The pane installs into the original cab frame... -
$5.00 Off
$334.95 List Price:
$339.95Machine: New Holland Skid Steer LoaderMaterial: Heavy-duty vinyl-coated nylon | 40-mil clear vinyl windowsDoor: Included — full-size vinyl window + cold-weather bottom flapInstallation: Installs in minutes — no drilling or permanent modifications 📋 Overview Keep your New Holland Skid Steer Loader operator dry, warm,... -
$106.00 Off
$705.99 List Price:
$811.99🔌CAN to 3 pin 🔧Controller 🚜Bobcat CAN machines 📘 Overview A controller arrangement for running a John Deere 3-pin controlled attachment from a Bobcat 7-pin CAN machine. Because the Bobcat 7-pin port carries a CAN control signal rather than switched power, this needs a... -
$18.00 Off
$117.99 List Price:
$135.99🔩All pins and seals included 🔧Attachment side 🚜Bobcat 7 pin Trident 📘 Overview This is the male Trident (ITT) 7-pin connector for the attachment side of a Bobcat machine. It rebuilds a damaged attachment connector without replacing the whole wiring harness — body, pins,... -
$13.00 Off
$123.99 List Price:
$136.99🔎OEM interchange 🔧Complete kit 📘 Overview Bobcat coupler lever kit replacement — right Hand Coupler Lever Kit — the Bobcat replacement for OEM 6724775M. It covers 37 published Bobcat models, listed in full further down this page. Every component interchanges with the original, so... -
$22.00 Off
$216.99 List Price:
$238.99🔎OEM interchange 🏭Aftermarket 📘 Overview Komatsu mirror replacement — mirror — the Komatsu replacement for OEM 56B-54-17313. It covers 8 published Komatsu models, listed in full further down this page. The head mounts to the arm and bracket already fitted to the machine, so... -
$5.00 Off
$334.95 List Price:
$339.95Machine: Gehl Skid Steer LoaderMaterial: Heavy-duty vinyl-coated nylon | 40-mil clear vinyl windowsDoor: Included — full-size vinyl window + cold-weather bottom flapInstallation: Installs in minutes — no drilling or permanent modifications 📋 Overview Keep your Gehl Skid Steer Loader operator dry, warm, and productive... -
$8.00 Off
$72.99 List Price:
$80.99🔎OEM interchange 📦Crated 📘 Overview OEM LQ02C01301S001 — front Lower Glass — the Kobelco replacement for OEM LQ02C01301S001, cut to 32.5" X 17". It covers 55 published Kobelco models, listed in full further down this page. The pane installs into the original cab frame... -
$20.00 Off
$195.99 List Price:
$215.99🔎OEM interchange 📦Crated 📘 Overview Kobelco windshield replacement — front Upper Glass — the Kobelco replacement for OEM YN02C01563P1, cut to 42" X 32.5". It covers 15 published Kobelco models, listed in full further down this page. The pane installs into the original cab... -
$3.00 Off
$19.99 List Price:
$22.99Deutsch 8/14 Pin Machine-Side Nut and Washer Set A missing or damaged retaining nut can leave a Deutsch connector loose, exposed, and difficult to secure. The Nut and Washer for Deutsch 8/14 Pin Male (Machine Side) - Skid Steer Genius provides the essential hardware... -
$60.00 Off
$593.99 List Price:
$653.99260× stronger than the glass it replaces — at half the weight. SHIELDS® Lexan® polycarbonate, formed to the exact shape of your ASV windshield. Drops into the factory opening, reuses your existing hardware, and stays in the frame when something hits it. ✓ Guaranteed... -
$9.00 Off
$83.99 List Price:
$92.99🔎OEM interchange 📦Crated 📘 Overview Kobelco windshield replacement — front Lower Glass — the Kobelco replacement for OEM YT02C01072P1, cut to 31.5" X 16". It covers 18 published Kobelco models, listed in full further down this page. The pane installs into the original cab... -
$219.00 Off
$1,465.99 List Price:
$1,684.99🔄Bobcat attachments on any brand 🔌Plug in and go 🏭Patent pending 📘 Overview The CAN PRO runs Bobcat CAN attachments on machines that are not Bobcats. It plugs into the 14-pin connector on your loader and converts the machine's 12-volt outputs into the CAN... -
$18.00 Off
$117.99 List Price:
$135.99📏108 inches 🔌Controller cable ⚠Controller use only 📘 Overview The SG-CBC-108 is a 108-inch replacement cable for Skid Steer Genius CB-4000 and CB-6000 series controllers. It carries a 7-pin Trident connector on the machine end and a 4-pin Deutsch on the controller end, for... -
$5.00 Off
$27.99 List Price:
$32.99Bobcat 7 Pin Machine Side Socket Kit Reliable attachment operation starts with a sound electrical connection. The Bobcat 7 Pin Machine Side Socket Kit - Skid Steer Genius provides replacement female sockets for the machine-side Trident ITT 7-pin connector used on compatible Bobcat skid... -
$52.00 Off
$514.99 List Price:
$566.99260× stronger than the glass it replaces — at half the weight. SHIELDS® Lexan® polycarbonate, formed to the exact shape of your Takeuchi windshield. Drops into the factory opening, reuses your existing hardware, and stays in the frame when something hits it. ✓ Guaranteed... -
$60.00 Off
$591.99 List Price:
$651.99260× stronger than the glass it replaces — at half the weight. SHIELDS® Lexan® polycarbonate, formed to the exact shape of your John Deere windshield. Drops into the factory opening, reuses your existing hardware, and stays in the frame when something hits it. ✓...
PICKING THE RIGHT SKID STEER ACCESSORY
Identify Your Priorities
Think about where and how you’ll be using your machine. If winter traction is a concern, snow chains or studs are essential. Want better protection or comfort? Consider cab enclosures or glass panels. Securing your skid steer? Anti-theft locks offer peace of mind.
Match Accessories To Your Machine
Make sure your skid steer accessories fit your model and mounting type. This is especially important for adapter plates, hydraulic systems, or electrical upgrades.
Consider Quality And Durability
Look for mini skid steer accessories that are made from rugged materials and hold up well under jobsite stress and tough conditions.
Evaluate Ease Of Installation And Use
Choose skid steer accessories that install easily and hold up over time. Tools that are simple to use also help minimize downtime and boost field efficiency.
WHAT SETS OUR SKID STEER ACCESSORIES COLLECTION APART?
Built For Tough Conditions
Made with high-grade materials, our skid steer accessories are built to take on rugged terrain, year-round exposure, and long days on the job.
Trusted U.S. Suppliers
We partner with top American brands that manufacture durable skid steer accessories designed for performance and reliability.
Fast Delivery Across The U.S.
With fast order handling, accurate freight quotes, and live tracking, we make it simple to get the skid steer accessories you need, when you need them.
Fair Pricing & Financing
Our skid steer accessories come with competitive pricing and flexible financing options to help you gear up without delay.
NEED HELP CHOOSING THE RIGHT SKID STEER ACCESSORY?
Not sure which skid steer accessories fit your machine or jobsite needs? Our team of experts is here to help: no guesswork, just solid recommendations backed by hands-on experience.
Contact Us →
FAQs
Are Skid Steer Accessories Interchangeable Between Brands?
Many skid steer accessories use standard mount types that work across different brands. Always verify your machine's specs before ordering to ensure the right fit.
Do Accessories Fit Both Standard And Mini Skid Steers?
Some accessories are made for mini skid steers, others for full-size machines. We label each product clearly so you can match them with your equipment confidently.
How Do I Install An Attachment Plate Or Adapter?
Most skid loader accessories are either bolt-on or weld-on. Use standard mechanical tools and follow the included instructions to mount them securely.
Do I Need Snow Chains And Tire Studs Together?
Not always. Chains offer overall traction, while studs add direct grip. Depending on your winter conditions, one or both may be the right choice.
What Maintenance Is Required For Skid Steer Accessories?
Keep skid steer accessories clean and dry. Check for loose parts, apply grease where needed, and store indoors to prevent rust. Regular upkeep keeps them reliable.
CUSTOMER SUPPORT
If you need support, we’re here to help.
Mon-Fri: 8am-4:30pm CT
Sat-Sun: Closed
You can also email us for customer service or product support.
support@eskidsteer.com
Call or Text
To place a new order or for assistance with an existing order call or text us at
+1 (866) 757-8337
Live Chat
Have questions or need help?
Chat with us using the icon in the bottom left.
Start new chat
- Choosing a selection results in a full page refresh.