Couldn't load pickup availability
108" Replacement Cable (Bobcat 7-Pin to 4-Pin Deutsch) — built specifically for CB-4000 and CB-6000 Genius Controllers.
Important Safety Warning: DO NOT connect this cable directly between your attachment and your Bobcat loader. This is a controller replacement cable only. Direct connection can cause serious damage to your machine—please follow this warning carefully.
How it connects: One end plugs into your Bobcat 7-pin connector, and the other end plugs into your Skid Steer Genius CB-4000/CB-6000 controller.
Disclaimer:
This is not a Bobcat® product and is not endorsed by Bobcat®. We are in no way attempting to make you think this is a Bobcat® product. This product is optically isolated from the controls of your machine and cannot damage your machine or controls. It is safe to use and will not damage anything. If a dealer claims your warranty will be voided or that this product will damage your machine, please call and report it to us. Skid Steer Genius is a specialty controls company—our goal is to make anything you buy for your machine work on any machine. Others design and build in such a way as to stop you from doing this.
Bobcat®, the Bobcat logo, and the colors of the Bobcat machine are registered trademarks of Bobcat Company in the United States and various other countries. Bobcat Company is a subsidiary of Doosan Infracore Bobcat Holdings Co., Ltd., a wholly owned subsidiary of Doosan Infracore Co., Ltd.
All rights reserved.
This 108" cable is a replacement harness designed to connect a Bobcat 7-pin machine-side connector to a 4-pin Deutsch connector used on Skid Steer Genius controllers.
This cable is intended for use with the Skid Steer Genius CB-4000 and CB-6000 controllers only.
No. This cable should NOT be used to connect an attachment directly to a Bobcat machine. It is only meant to connect your Bobcat to a compatible Genius controller.
Connecting it incorrectly (attachment-to-machine) can cause serious damage to your machine. Always use it only as a controller replacement cable.
One end is a 7-pin connector that plugs into your Bobcat. The other end is a 4-pin Deutsch connector that plugs into the CB-4000/CB-6000 controller.
No. This is not a Bobcat® product and it is not endorsed by Bobcat®.
When used correctly with the proper controller, it is designed to be optically isolated from the machine controls and safe to use. Do not use it in place of proper attachment wiring.
You may need this cable if your existing controller cable is damaged, worn, or you want a correct-length replacement for connecting your Bobcat to a CB-4000/CB-6000 controller.
No. This is a replacement cable only. It does not replace a controller and it is not an attachment-to-machine adapter.
Thanks for subscribing!
This email has been registered!
