Trident 7 Pin Male Connector for Bobcat - Attachment Side (QTY 1) - Skid Steer Genius

Fits Bobcat only. This is the connector that so many of you have hunted for for years. We certainly did. If you have damaged the connector on your attachment that connects to your Bobcat Skid Steer Loader, then this is the connector for you. No need to buy an expensive harness when all you need is the connector. You will need to solder or crimp wires to the pins. This is the same connector that the dealers sell for $320 + as part of the wiring harness, but why change the harness when all you need is the connector. 

Kit Includes:

• 1 Male Trident Body
• 1 Barrel Top Cap and Seal
• 3 x Male Power Pins
• 4 x Male Canbus Pins
• Installation tool not required
  
• De-Installation Tool is not supplied at this time because they are very expensive.
  

Kit does not include crimping tool or soldering tool to connect pins to wire.

About these connectors:
We have had so many customers complain that when they damage the connectors on their machines, their dealers will not sell them a new connector. Instead they are forced into buying a whole new wiring harness just to get the connector. Some of these harnesses cost as much as $500. This is crazy! 

Since we buy huge volumes of the attachment side connectors, we were able to buy the machine side for the same great price. They were next to impossible to find and we finally had to blindly buy 100 units and wait for 16 weeks just to see if they were the right connectors. It has paid off for us and now it will for you. Buying these in bulk allows us to offer just the connector with pins for a much better price. We bring these in and kit them with everything you need to repair your harness. We are sure you will see just how much effort we put into this item just to save you money.

Warning. This connector is meant to replace a damaged connector.  Do not attempt to change an 8 pin or 14 pin connector by just changing it out for this connector.  Do not attempt to just connect it to existing wiring on a non Bobcat brand attachment.  You will damage your machine.  There is a small computer controller installed farther down the harness on the attachment.  Regular attachments do not have this so you could possibly ground out one of the Can lines on your Bobcat and then it is lights out.  You could permanently damage your machine.  Call us if you have any questions before you try anything.