-
$13.00 Off
$126.99 List Price:
$139.99🔎OEM interchange 📦Crated 📘 Overview Excavator windshield — front Lower Glass — the Kobelco replacement for OEM 2427R1161, cut to 32.5" X 16.5". The pane installs into the original cab frame using the factory glazing seal and retaining hardware, so no cab modification is... -
$15.00 Off
$145.99 List Price:
$160.99🔎OEM interchange 📦Crated 📘 Overview John deere windshield replacement — front Lower Glass — the John Deere replacement for OEM 4457161R, cut to 32.5" X 20". It covers 7 published John Deere models, listed in full further down this page. The pane installs into... -
$26.00 Off
$254.99 List Price:
$280.99🔎OEM interchange 📦Crated 📘 Overview John deere windshield replacement — front Lower Glass — the John Deere replacement for OEM 4635167, cut to 30" X 20.5". It covers 3 published John Deere models, listed in full further down this page. The pane installs into... -
$36.00 Off
$355.99 List Price:
$391.99🔎OEM interchange 📦Crated 📘 Overview John deere windshield replacement — front Windshield — the John Deere replacement for OEM 4635166, cut to 29.5" X 29". It covers 3 published John Deere models, listed in full further down this page. The pane installs into the... -
$24.00 Off
$237.99 List Price:
$261.99🔎OEM interchange 📦Crated 📘 Overview Caterpillar cab glass — upper Rear Glass — the Caterpillar replacement for OEM 229-0309. It covers 12 published Caterpillar models, listed in full further down this page. The pane installs into the original cab frame using the factory glazing... -
$23.00 Off
$221.99 List Price:
$244.99🔎OEM interchange 📦Crated 📘 Overview Caterpillar cab glass — lower Rear Glass — the Caterpillar replacement for OEM 229-0308, cut to 35" X 30". The pane installs into the original cab frame using the factory glazing seal and retaining hardware, so no cab modification... -
$12.00 Off
$113.99 List Price:
$125.99🔎OEM interchange 📦Crated 📘 Overview Excavator windshield — front Lower Glass — the Case & New Holland replacement for OEM KHN3046, cut to 28" X 16.5". It covers 4 published Case & New Holland models, listed in full further down this page. The pane... -
$4.00 Off
$31.99 List Price:
$35.99Depco 10-Inch Round Mirror for Komatsu Excavators A missing or damaged mirror can limit the operator’s view from the cab. This Depco 10-inch round excavator mirror is a replacement part listed for selected Komatsu machines and is identified as a direct interchange for OEM... -
$16.00 Off
$159.99 List Price:
$175.99🔎OEM interchange 🔧Complete kit 📘 Overview John deere mirror kit — left Hand Mirror Kit — the John Deere replacement for OEM M-21-8300L. It covers 24 published John Deere models, listed in full further down this page. The head mounts to the arm and... -
$4.00 Off
$39.99 List Price:
$43.99Caterpillar Excavator Mirror, 6.25" x 12" | Depco Clear visibility is essential when positioning an excavator, working around personnel, or monitoring the area beside the machine. This Depco Caterpillar excavator mirror provides a practical replacement for a damaged, cracked, or missing mirror and is... -
$34.00 Off
$334.99 List Price:
$368.99260× stronger than the glass it replaces — at half the weight. SHIELDS® Lexan® polycarbonate, formed to the exact shape of your Case windshield. Drops into the factory opening, reuses your existing hardware, and stays in the frame when something hits it. ✓ Guaranteed... -
$39.00 Off
$382.99 List Price:
$421.99260× stronger than the glass it replaces — at half the weight. SHIELDS® Lexan® polycarbonate, formed to the exact shape of your CAT windshield. Drops into the factory opening, reuses your existing hardware, and stays in the frame when something hits it. ✓ Guaranteed... -
$39.00 Off
$382.99 List Price:
$421.99260× stronger than the glass it replaces — at half the weight. SHIELDS® Lexan® polycarbonate, formed to the exact shape of your John Deere windshield. Drops into the factory opening, reuses your existing hardware, and stays in the frame when something hits it. ✓... -
$39.00 Off
$382.99 List Price:
$421.99260× stronger than the glass it replaces — at half the weight. SHIELDS® Lexan® polycarbonate, formed to the exact shape of your John Deere windshield. Drops into the factory opening, reuses your existing hardware, and stays in the frame when something hits it. ✓... -
$352.00 Off
$3,516.99 List Price:
$3,868.99Paladin Classic Series Main pin mounting 140–350 lbs Overview This Paladin Classic Series hydraulic thumb for excavator mounts on the main pin and turns a digging bucket into a grab. It is offered for Coupler Length, STD Length machine classes, weighing 140–350 lbs. A... -
$873.00 Off
$5,819.99 List Price:
$6,692.99🏭Made in USA 🔧4140 square shaft 📘 Overview The EZ Spot UR Mini Excavator Rotator (EZ-001X) is a small, lightweight rotating base built for mini excavators. It does not use a quick attach plate — it requires a bolt-on mount specific to the brand... -
$675.00 Off
$33,075.99 List Price:
$33,750.99201 HP radial piston motor 100mm square shaft 5,000 PSI rated Overview The SD95HPS-ECV is a helical pile driver attachment — Digga's high powered Supa drive at 69,244 ft-lbs with the Energy Control Valve fitted from the factory. The ECV is what separates an... -
$598.00 Off
$29,262.99 List Price:
$29,860.99201 HP radial piston motor 100mm square shaft 5,000 PSI rated Overview The SD95HPS is Digga's high powered Supa drilling drive at 69,244 ft-lbs — the torque class where an auger drive stops being an attachment and becomes the machine's main job. Sold here... -
$598.00 Off
$29,262.99 List Price:
$29,860.99201 HP radial piston motor 100mm square shaft 5,000 PSI rated Overview The SD80HPS is Digga's high powered Supa drilling drive at 62,638 ft-lbs — the torque class where an auger drive stops being an attachment and becomes the machine's main job. Sold here... -
$776.00 Off
$37,994.99 List Price:
$38,770.99Made in USA ECV fitted Overview This screw anchor drive is the Digga SD95, part of the Supa range built specifically for helical pile and screw anchor installation rather than adapted from a drilling drive. It is the largest drive in the Supa two-speed...
SHOP EXCAVATOR ATTACHMENTS BY TYPE
CHOOSING THE RIGHT EXCAVATOR PARTS & ATTACHMENTS
Define Your Primary Task
Start with the work you’re doing. Digging or trenching? Go with augers or buckets. Land clearing or demolition? You’ll want brush cutters, grapples, or thumbs. For sorting or finishing, tilting quick couplers give extra control across tight moves.
Match to Your Machine’s Specs
Know your machine’s class. Mini, mid, or full size each demands different flow, spacing, and weight support. Many mini excavator accessories need less flow but tighter precision, so check those specs before you gear up.
Focus on Durability
Look for thick-gauge steel, welded joints, and reinforced cutting edges. Most mini excavator attachments get run hard in tight spaces, so the gear you bolt on has to last, not just fit.
Think Long-Term: One Tool, Many Jobs
Hydraulic thumbs, tiltrotators, or grapples can adapt across projects. A thumb lets you move rock, lift timber, and clean debris with one install—saving time and machine swaps over the long haul.
WHY BUY EXCAVATOR ATTACHMENTS FROM ESKIDSTEER.COM
Proven Compatibility
We help you find excavator attachments that match your machine’s specs—right down to pin spacing, weight class, and hydraulic flow.
Durable, Job-Site Tested Gear
Every product is field-tested for performance under pressure. From rippers to mini excavator attachments, these parts are built to take a beating and keep going.
Transparent Pricing & Financing
No surprise fees. You see your price up front. Plus, we offer flexible payment options on all major excavator equipment.
Fast Nationwide Shipping
We ship quickly and provide tracking from dock to delivery. You’ll always know when your excavator attachments are arriving.
Expert Customer Support
Need help picking a part or solving a fit issue? Our team has answers. We guide you through fitment, flow specs, and install tips every step of the way.
NEED HELP FINDING THE RIGHT EXCAVATOR ATTACHMENT?
Whether you're outfitting a mini or a full-size rig, we’re here to help. Our team can match you with the right tool, just tell us your machine and the work ahead.
Contact Us →
FAQs
How do I know which attachment fits my excavator?
Start with your machine’s weight, pin spacing, and flow specs. We’ll help you match the right attachments for excavators to your exact setup.
Can I use skid steer attachments on an excavator?
Usually not. Mounting systems and flow requirements differ. For best results, use excavator equipment or mini attachments made for your specific machine.
What if I need help after I get my attachment?
Reach out anytime. If you need help with install, compatibility, or accessory fit, our team is a call or email away with real answers.
Can I use a larger attachment than what’s recommended for my excavator?
We don’t recommend it. Oversized tools stress your machine. If you’re unsure, ask us. We’ll guide you to attachments for excavators that match flow and weight specs.
How do I know if my excavator’s hydraulic flow is compatible with an attachment?
Compare the GPM and PSI listed in your operator manual to the specs shown on the attachment’s product page. We can help confirm compatibility.
CUSTOMER SUPPORT
If you need support, we’re here to help.
Mon-Fri: 8am-4:30pm CT
Sat-Sun: Closed
You can also email us for customer service or product support.
support@eskidsteer.com
Call or Text
To place a new order or for assistance with an existing order call or text us at
+1 (866) 757-8337
Live Chat
Have questions or need help?
Chat with us using the icon in the bottom left.
Start new chat
- Choosing a selection results in a full page refresh.