-
$776.00 Off
$37,994.99 List Price:
$38,770.99Made in USA ECV fitted Overview This screw anchor drive is the Digga SD80, part of the Supa range built specifically for helical pile and screw anchor installation rather than adapted from a drilling drive. It is the second-heaviest drive in the range. It... -
$675.00 Off
$33,075.99 List Price:
$33,750.99201 HP radial piston motor 100mm square shaft 5,000 PSI rated Overview The SD80HPS-ECV is a helical pile driver attachment — Digga's high powered Supa drive at 62,638 ft-lbs with the Energy Control Valve fitted from the factory. The ECV is what separates an... -
$776.00 Off
$37,994.99 List Price:
$38,770.99201 HP radial piston motor 100mm square shaft 5,000 PSI rated Overview The SD70HPT is Digga's two speed high powered Supa helical pile driver attachment: 52,007 ft-lbs in high torque, a low torque range that turns at 51 RPM for speed, and the Energy... -
$598.00 Off
$29,262.99 List Price:
$29,860.99201 HP radial piston motor 100mm square shaft 5,000 PSI rated Overview The SD70HPS is Digga's high powered Supa drilling drive at 51,634 ft-lbs — the torque class where an auger drive stops being an attachment and becomes the machine's main job. Sold here... -
$776.00 Off
$37,994.99 List Price:
$38,770.99201 HP radial piston motor 100mm square shaft 5,000 PSI rated Overview The SD50HPT is Digga's two speed high powered Supa helical pile driver attachment: 39,728 ft-lbs in high torque, a low torque range that turns at 66 RPM for speed, and the Energy... -
$675.00 Off
$33,075.99 List Price:
$33,750.99201 HP radial piston motor 100mm square shaft 5,000 PSI rated Overview The SD70HPS-ECV is a helical pile driver attachment — Digga's high powered Supa drive at 51,634 ft-lbs with the Energy Control Valve fitted from the factory. The ECV is what separates an... -
$776.00 Off
$37,994.99 List Price:
$38,770.99Made in USA ECV fitted Overview This screw anchor drive is the Digga SD70, part of the Supa range built specifically for helical pile and screw anchor installation rather than adapted from a drilling drive. It sits in the middle of the range and... -
$776.00 Off
$37,994.99 List Price:
$38,770.99Made in USA ECV fitted Overview This screw anchor drive is the Digga SD50, part of the Supa range built specifically for helical pile and screw anchor installation rather than adapted from a drilling drive. It sits one step above the SD45 with the... -
$776.00 Off
$37,994.99 List Price:
$38,770.99Made in USA ECV fitted Overview This screw anchor drive is the Digga SD45, part of the Supa range built specifically for helical pile and screw anchor installation rather than adapted from a drilling drive. It is the entry point to the Supa range... -
$38.00 Off
$1,822.99 List Price:
$1,860.99RYNO Piling Cradle Hitch - Digga For piling applications, the way an auger drive is supported matters. The Digga RYNO Piling Cradle Hitch carries the drive in a cradle secured by a bolted base plate, instead of allowing it to swing from a pin.... -
$598.00 Off
$29,262.99 List Price:
$29,860.99201 HP radial piston motor 100mm square shaft 5,000 PSI rated Overview The SD50HPS is Digga's high powered Supa drilling drive at 39,463 ft-lbs — the torque class where an auger drive stops being an attachment and becomes the machine's main job. Sold here... -
$675.00 Off
$33,075.99 List Price:
$33,750.99201 HP radial piston motor 100mm square shaft 5,000 PSI rated Overview The SD50HPS-ECV is a helical pile driver attachment — Digga's high powered Supa drive at 39,463 ft-lbs with the Energy Control Valve fitted from the factory. The ECV is what separates an... -
$776.00 Off
$37,994.99 List Price:
$38,770.99201 HP radial piston motor 100mm square shaft 5,000 PSI rated Overview The SD45HPT is Digga's two speed high powered Supa helical pile driver attachment: 33,880 ft-lbs in high torque, a low torque range that turns at 78 RPM for speed, and the Energy... -
$675.00 Off
$33,075.99 List Price:
$33,750.99201 HP radial piston motor 100mm square shaft 5,000 PSI rated Overview The SD45HPS-ECV is a helical pile driver attachment — Digga's high powered Supa drive at 33,654 ft-lbs with the Energy Control Valve fitted from the factory. The ECV is what separates an... -
$598.00 Off
$29,262.99 List Price:
$29,860.99201 HP radial piston motor 100mm square shaft 5,000 PSI rated Overview The SD45HPS is Digga's high powered Supa drilling drive at 33,654 ft-lbs — the torque class where an auger drive stops being an attachment and becomes the machine's main job. Sold here... -
$58.00 Off
$2,822.99 List Price:
$2,880.99Digga Excavator Drilling and Piling Extension Boom When the required drilling or piling depth is beyond the reach of the excavator boom alone, an extension can add working distance between the machine and the drive. The Digga Excavator Drilling and Piling Extension Boom is... -
$308.80 Off
$3,087.99 List Price:
$3,396.7942" Mini Grapple Rake – Digga Gather brush, roots and rock without carrying unnecessary soil along with the load. The Digga 42" Mini Grapple Rake combines a rake-style profile with hydraulic tined jaws: the tines retain bulky debris while letting loose soil sift through.... -
$10.00 Off
$95.99 List Price:
$105.99🔎OEM interchange 📦Crated 📘 Overview Komatsu door glass replacement — upper Rear Door Glass — the Komatsu replacement for OEM 20Y-53-12840. It covers 29 published Komatsu models, listed in full further down this page. The pane installs into the original cab frame using the... -
$20.00 Off
$195.99 List Price:
$215.99🔎OEM interchange 📦Crated 📘 Overview Komatsu windshield replacement — komatsu excavator front glass — built to the OEM 20Y-53-11601 specification. It covers 30 published Komatsu models, listed in full further down this page. The pane installs into the original cab frame using the factory... -
$10.00 Off
$96.99 List Price:
$106.99🔎OEM interchange 📦Crated 📘 Overview Komatsu door glass replacement — komatsu skid steer door glass replaces OEM 20Y-53-11241 and fits the original mounting. It covers 29 published Komatsu models, listed in full further down this page. The pane installs into the original cab frame...
SHOP EXCAVATOR ATTACHMENTS BY TYPE
CHOOSING THE RIGHT EXCAVATOR PARTS & ATTACHMENTS
Define Your Primary Task
Start with the work you’re doing. Digging or trenching? Go with augers or buckets. Land clearing or demolition? You’ll want brush cutters, grapples, or thumbs. For sorting or finishing, tilting quick couplers give extra control across tight moves.
Match to Your Machine’s Specs
Know your machine’s class. Mini, mid, or full size each demands different flow, spacing, and weight support. Many mini excavator accessories need less flow but tighter precision, so check those specs before you gear up.
Focus on Durability
Look for thick-gauge steel, welded joints, and reinforced cutting edges. Most mini excavator attachments get run hard in tight spaces, so the gear you bolt on has to last, not just fit.
Think Long-Term: One Tool, Many Jobs
Hydraulic thumbs, tiltrotators, or grapples can adapt across projects. A thumb lets you move rock, lift timber, and clean debris with one install—saving time and machine swaps over the long haul.
WHY BUY EXCAVATOR ATTACHMENTS FROM ESKIDSTEER.COM
Proven Compatibility
We help you find excavator attachments that match your machine’s specs—right down to pin spacing, weight class, and hydraulic flow.
Durable, Job-Site Tested Gear
Every product is field-tested for performance under pressure. From rippers to mini excavator attachments, these parts are built to take a beating and keep going.
Transparent Pricing & Financing
No surprise fees. You see your price up front. Plus, we offer flexible payment options on all major excavator equipment.
Fast Nationwide Shipping
We ship quickly and provide tracking from dock to delivery. You’ll always know when your excavator attachments are arriving.
Expert Customer Support
Need help picking a part or solving a fit issue? Our team has answers. We guide you through fitment, flow specs, and install tips every step of the way.
NEED HELP FINDING THE RIGHT EXCAVATOR ATTACHMENT?
Whether you're outfitting a mini or a full-size rig, we’re here to help. Our team can match you with the right tool, just tell us your machine and the work ahead.
Contact Us →
FAQs
How do I know which attachment fits my excavator?
Start with your machine’s weight, pin spacing, and flow specs. We’ll help you match the right attachments for excavators to your exact setup.
Can I use skid steer attachments on an excavator?
Usually not. Mounting systems and flow requirements differ. For best results, use excavator equipment or mini attachments made for your specific machine.
What if I need help after I get my attachment?
Reach out anytime. If you need help with install, compatibility, or accessory fit, our team is a call or email away with real answers.
Can I use a larger attachment than what’s recommended for my excavator?
We don’t recommend it. Oversized tools stress your machine. If you’re unsure, ask us. We’ll guide you to attachments for excavators that match flow and weight specs.
How do I know if my excavator’s hydraulic flow is compatible with an attachment?
Compare the GPM and PSI listed in your operator manual to the specs shown on the attachment’s product page. We can help confirm compatibility.
CUSTOMER SUPPORT
If you need support, we’re here to help.
Mon-Fri: 8am-4:30pm CT
Sat-Sun: Closed
You can also email us for customer service or product support.
support@eskidsteer.com
Call or Text
To place a new order or for assistance with an existing order call or text us at
+1 (866) 757-8337
Live Chat
Have questions or need help?
Chat with us using the icon in the bottom left.
Start new chat
- Choosing a selection results in a full page refresh.