-
$25.00 Off
$1,185.99 List Price:
$1,210.99Made in USA Teeth & pilot included Overview The Digga A8 is a general-purpose earth auger bit for excavator drives, supplied here on a 3" hex hub. It is the largest of Digga’s flat-tooth earth augers, using chisel ripping teeth in the inner pockets... -
$107.00 Off
$5,233.99 List Price:
$5,340.99Made in USA 5-yr warranty Overview The largest single-speed high flow auger drive Digga builds, the 7DDS runs on the 2.5" hex shaft, and it needs the most flow of the three to reach its rated torque. It is the right choice on a... -
$181.00 Off
$8,839.99 List Price:
$9,020.99Made in USA 5-yr warranty Overview The middle model of three two-speed drives on the 2.5" hex shaft, this 2 speed auger drive sits between the 5DDT and 7DDT and asks for more flow than the 5DDT to reach its higher torque. All three... -
$106.00 Off
$5,194.99 List Price:
$5,300.99Made in USA 5-yr warranty Overview This high flow auger drive, the Digga 6DDS, sits between the 5DDS and 7DDS in the range, and the three share a shaft, a bit family and a mount pattern — what separates them is torque and the... -
$180.00 Off
$8,820.99 List Price:
$9,000.99Made in USA 5-yr warranty Overview This 2 speed auger drive is the smallest two-speed model Digga builds, and it is effectively two drives in one housing: a low-speed high-torque range for large diameters and hard ground, and a high-speed range for smaller bits... -
$105.00 Off
$5,145.99 List Price:
$5,250.99Made in USA 5-yr warranty Overview This high flow auger drive is the entry point to Digga’s DDS range and the first model to step up from the 2" hex shaft used across the standard-flow DSS drives to a 2.5" hex shaft. That single... -
$63.00 Off
$3,038.99 List Price:
$3,101.99Made in USA 5-yr warranty Overview This skid steer auger drive is the Digga 4DSS, the top of the standard-flow range, supplied as a bare drive unit. It is the most torque available on the 2" hex shaft before the range moves to high-flow... -
$68.00 Off
$3,302.99 List Price:
$3,370.99Made in USA 5-yr warranty Overview The Digga 3DSS is a skid steer auger drive sold here as the drive unit alone, sitting between the 2DSS and 4DSS in the standard-flow range. Its recommended flow band overlaps the 2DSS at the bottom and reaches... -
$323.00 Off
$15,787.99 List Price:
$16,110.99Made in USA 5-yr warranty Overview This Digga excavator auger drive is the largest two-speed model in the DDT range, sitting at the top of the 18–30 tonne class on the 100mm square shaft. Above it Digga’s line-up moves to the SD “Supa” drives,... -
$248.00 Off
$12,122.99 List Price:
$12,370.99Made in USA 5-yr warranty Overview The largest single-speed excavator auger drive Digga builds, the 30DDS sits at the top of the DDS range, at the top of the 18–30 tonne class on the 100mm square shaft. Above it, Digga’s range moves to the... -
$12.00 Off
$553.99 List Price:
$565.99Made in USA 12-mo warranty Overview This hydraulic hose kit is the long-run 3/4" set built for Digga’s TPE telescopic piling and drilling extension frames, in 14ft and 16ft overall lengths. A TPE frame extends the drive well beyond where a fixed frame holds... -
$54.00 Off
$2,606.99 List Price:
$2,660.99Made in USA 5-yr warranty Overview Supplied as a bare drive, this skid steer auger drive is the Digga 2DSS — a step up in torque from the 1DSS on the same 2" hex shaft, for machines that can supply more flow. Because the... -
$322.00 Off
$15,768.99 List Price:
$16,090.99Made in USA 5-yr warranty Overview The Digga 25DDT excavator auger drive is a two-speed high-flow unit for 18–30 tonne machines, delivering 24,979 ft-lbs of maximum torque at 3,500 PSI on 20–53 GPM through a 100mm square output shaft. Two speeds make it effectively... -
$247.00 Off
$12,103.99 List Price:
$12,350.99Made in USA 5-yr warranty Overview The Digga 25DDS is an excavator auger drive, the middle single-speed model in the 18–30 tonne range, on the same 100mm square shaft as the 20DDS and 30DDS. It is the direct single-speed counterpart to the 25DDT: same... -
$321.00 Off
$15,719.99 List Price:
$16,040.99Made in USA 5-yr warranty Overview This Digga excavator auger drive is the smallest of three two-speed models on the 100mm square shaft, serving 18–30 tonne machines and shares its augers, extensions and mounts with the 25DDT and 30DDT. The square shaft is the... -
$247.00 Off
$12,063.99 List Price:
$12,310.99Made in USA 5-yr warranty Overview This Digga excavator auger drive, the 20DDS, is the smallest of three single-speed models built for 18–30 tonne machines on a 100mm square output shaft. The square shaft is the dividing line in Digga’s range: it takes the... -
$3.00 Off
$100.99 List Price:
$103.99Made in USA 12-mo warranty Overview This 2 speed auger drive controller is a joystick-mounted toggle switch, which puts the speed change under the thumb of the hand already on the control. On a drive where you shift between high torque and high speed... -
$2.00 Off
$96.99 List Price:
$98.99Made in USA 12-mo warranty Overview This 2 speed auger drive controller is a floor-mounted foot switch, which shifts the drive between speed ranges without using a hand at all. On a machine where both hands are committed — working the joysticks while positioning... -
$51.00 Off
$2,469.99 List Price:
$2,520.99Made in USA 5-yr warranty Overview This skid steer auger drive is the Digga 1DSS supplied as a drive unit on its own — no mount, no hoses, no bit. It is the same drive that goes into the 1DSS auger package, sold this... -
$262.00 Off
$12,808.99 List Price:
$13,070.99Made in USA 5-yr warranty Overview The largest two-speed drive on a hex shaft, this Digga excavator auger drive tops the 13–16 tonne range and marks the boundary in Digga’s line-up: above the 16DDT the two-speed drives move to a 100mm square shaft, which...
SHOP DIGGA ATTACHEMENTS BY TYPE
HOW TO CHOOSE THE RIGHT DIGGA ATTACHMENTS
Match the Drive Unit to Your Machine
Digga auger drives come in different torque classes. If you're running a skid steer, a mid-range digga auger drive like the PDX2 might be perfect. Excavators often need more torque.
Consider the Ground Conditions
Not all dirt is equal. Loose soil? Standard bits will do. Clay or rock? You’ll want digga auger bits with bolt-on teeth for better bite and longer life on hard ground.
Look for Smart Features
Want faster, straighter holes? The digga halo system uses LED indicators to guide you as you drill. It's all about keeping your flight path true and consistent.
Don’t Forget Mounts & Hoses
We offer full kits with everything included hoses, mounts, even cradles. Tell us your hydraulic specs and we’ll match your setup with the right digga attachments.
WHY BUY DIGGA ATTACHMENTS FROM ESKIDSTEER.COM
Official Digga Partner
We’re a trusted source for authentic digga attachments, straight from the manufacturer. Every item is backed by full factory support and covered under warranty.
Expert Advice, No Guesswork
Our team knows these tools inside and out. Whether you're choosing a digga trencher or auger, we can walk you through torque specs, machine fit, and ground condition needs.
Complete Kits, Ready to Work
You won’t be chasing parts. Each setup includes the drive, hoses, mounts, and bits. Just bolt it on and get to work with a full digga augers system, pre-matched to your machine.
Transparent Pricing & Financing
What you see is what you pay. We also offer flexible financing so you can get the gear you need now without draining your budget.
Fast, Tracked Shipping
Your job can’t wait, and neither do we. Orders ship quickly with full tracking, so you always know where your digga attachments are and when they’ll arrive.
NEED HELP CHOOSING THE RIGHT DIGGA ATTACHMENT?
From torque specs to soil type, we’ve got you covered. Whether you're drilling, trenching, or mounting a drive head, our team can help you pick the right setup for your machine.
Contact Us →
FAQs
What size auger drive do I need for my skid steer?
It depends on your hydraulic flow and job type. For general dirt drilling, most standard-flow machines pair well with Digga’s PD series.
Are Digga augers compatible with other brands like Bobcat or CAT?
Yes. Digga attachments include universal mounts and hose options. We’ll help match the drive and bit setup to your machine’s specs.
How do I maintain a Digga auger drive?
Keep it greased, inspect bits, and store it dry. Digga auger drives are low-maintenance, but a quick check now and then saves downtime later.
What kind of teeth do I need for rocky ground?
Use bolt-on rock teeth or pilot points with wear protection. Let us know your soil type and we’ll guide you to the right digga auger bits.
Are Digga attachments covered by warranty?
Yes. All digga attachments we sell come with manufacturer-backed warranties. Coverage varies by model—ask us for details.`
CUSTOMER SUPPORT
If you need support, we’re here to help.
Mon-Fri: 8am-4:30pm CT
Sat-Sun: Closed
You can also email us for customer service or product support.
support@eskidsteer.com
Call or Text
To place a new order or for assistance with an existing order call or text us at
+1 (866) 757-8337
Live Chat
Have questions or need help?
Chat with us using the icon in the bottom left.
Start new chat
- Choosing a selection results in a full page refresh.