-
$181.00 Off
$8,839.99 List Price:
$9,020.995-yr gearbox warranty 3-yr motor warranty Lifetime shaft pull-out cover Overview At 5,013 ft-lbs with a 30 inch limit in clay and shale, this 6DDT excavator auger attachment is the middle of Digga's two-speed range for 4.5 to 8 tonne machines. It is sold... -
$107.00 Off
$5,233.99 List Price:
$5,340.995-yr gearbox warranty 3-yr motor warranty Lifetime shaft pull-out cover Overview With 6,164 ft-lbs and a 48 inch ceiling in earth, this 7DDS excavator auger attachment is the largest single-speed drive Digga offers for 4.5 to 8 tonne excavators and backhoes. It is sold... -
$180.00 Off
$8,820.99 List Price:
$9,000.995-yr gearbox warranty 3-yr motor warranty Lifetime shaft pull-out cover Overview The two-speed 5DDT excavator auger attachment produces 4,068 ft-lbs at 3,000 PSI and shifts between torque and speed while drilling, without lifting out of the hole. It is sold here with the mount... -
$106.00 Off
$5,194.99 List Price:
$5,300.995-yr gearbox warranty 3-yr motor warranty Lifetime shaft pull-out cover Overview This 6DDS excavator auger attachment carries 4,911 ft-lbs at 3,000 PSI and reaches 30 inches in clay and shale, the specification that usually decides whether a hole gets drilled in stiff ground. It... -
$105.00 Off
$5,145.99 List Price:
$5,250.995-yr gearbox warranty 3-yr motor warranty Lifetime shaft pull-out cover Overview Sized for 4.5 to 8 tonne machines, this 5DDS excavator auger attachment brings 3,904 ft-lbs at 3,000 PSI and runs from 10 GPM, the lowest flow demand of any drive in this class.... -
$72.00 Off
$3,518.99 List Price:
$3,590.99Extend drilling reach with the Digga XT40 When a job requires a deeper bore than the auger flight alone can reach, the XT40 Heavy Duty Auger Inner Extension adds length between a compatible drive and auger. This genuine Digga attachment accessory is the 6-foot... -
$17.00 Off
$823.99 List Price:
$840.99XT25 Auger Inner Extension – Digga, 4-Foot When a digging job calls for more depth, the Digga XT25 Auger Inner Extension adds 4 feet of reach to a compatible auger setup. Designed for an auger drive with a 2.5-inch hex hub, this inner extension... -
$15.00 Off
$690.99 List Price:
$705.99Digga Trencher Excavator Mounts Put a Digga Bigfoot trencher on an excavator quick coupler with a dedicated trencher mount. Designed for Bigfoot and Bigfoot XD trenchers, these mounts let the trencher attach like a bucket rather than requiring it to be pinned directly to... -
$65.00 Off
$3,165.99 List Price:
$3,230.99Digga TPE Extension Mounting Bracket for Skid Steers Reliable support for a telescopic piling and drilling extension starts with the correct mounting interface. The Skid Steer TPE Extension Mounting Bracket - Digga is the bracket used to carry Digga’s TPE extension on a skid... -
$8.00 Off
$392.99 List Price:
$400.99Digga Slide Shift Cradle for Skid Steer Auger Mounting Bracket A slide-shift auger mount depends on a correctly matched cradle to support and connect the drive at the bracket. This genuine Digga drive-side slide shift cradle is a replacement part for compatible Digga skid... -
$70.00 Off
$3,400.99 List Price:
$3,470.99Digga Large TPE Extension Mounting Bracket for Skid Steers When a large telescopic piling and drilling extension is part of the setup, the mounting interface needs to match the extension and carrier configuration. The Skid Steer Large TPE Extension Mounting Bracket - Digga is... -
$675.00 Off
$33,075.99 List Price:
$33,750.99201 HP radial piston motor 100mm square shaft 5,000 PSI rated Overview The SD95HPS-ECV is a helical pile driver attachment — Digga's high powered Supa drive at 69,244 ft-lbs with the Energy Control Valve fitted from the factory. The ECV is what separates an... -
$598.00 Off
$29,262.99 List Price:
$29,860.99201 HP radial piston motor 100mm square shaft 5,000 PSI rated Overview The SD95HPS is Digga's high powered Supa drilling drive at 69,244 ft-lbs — the torque class where an auger drive stops being an attachment and becomes the machine's main job. Sold here... -
$776.00 Off
$37,994.99 List Price:
$38,770.99Made in USA ECV fitted Overview This screw anchor drive is the Digga SD95, part of the Supa range built specifically for helical pile and screw anchor installation rather than adapted from a drilling drive. It is the largest drive in the Supa two-speed... -
$675.00 Off
$33,075.99 List Price:
$33,750.99201 HP radial piston motor 100mm square shaft 5,000 PSI rated Overview The SD80HPS-ECV is a helical pile driver attachment — Digga's high powered Supa drive at 62,638 ft-lbs with the Energy Control Valve fitted from the factory. The ECV is what separates an... -
$598.00 Off
$29,262.99 List Price:
$29,860.99201 HP radial piston motor 100mm square shaft 5,000 PSI rated Overview The SD80HPS is Digga's high powered Supa drilling drive at 62,638 ft-lbs — the torque class where an auger drive stops being an attachment and becomes the machine's main job. Sold here... -
$776.00 Off
$37,994.99 List Price:
$38,770.99Made in USA ECV fitted Overview This screw anchor drive is the Digga SD80, part of the Supa range built specifically for helical pile and screw anchor installation rather than adapted from a drilling drive. It is the second-heaviest drive in the range. It... -
$776.00 Off
$37,994.99 List Price:
$38,770.99201 HP radial piston motor 100mm square shaft 5,000 PSI rated Overview The SD70HPT is Digga's two speed high powered Supa helical pile driver attachment: 52,007 ft-lbs in high torque, a low torque range that turns at 51 RPM for speed, and the Energy... -
$675.00 Off
$33,075.99 List Price:
$33,750.99201 HP radial piston motor 100mm square shaft 5,000 PSI rated Overview The SD70HPS-ECV is a helical pile driver attachment — Digga's high powered Supa drive at 51,634 ft-lbs with the Energy Control Valve fitted from the factory. The ECV is what separates an... -
$598.00 Off
$29,262.99 List Price:
$29,860.99201 HP radial piston motor 100mm square shaft 5,000 PSI rated Overview The SD70HPS is Digga's high powered Supa drilling drive at 51,634 ft-lbs — the torque class where an auger drive stops being an attachment and becomes the machine's main job. Sold here...












