Hydraulic flow
15-25 GPM standard flow
Working widths
7 ft or 8.4 ft
Finish
Powder coated
Guaranteed Fit
Fast Shipping
Hassle-Free Returns
Description
🔒1-year warranty
🔩Hardox 450 edge
📘 Overview
The Skeer Pro is a 4-way skid steer grader attachment, and the choice you have to make is width: 7 ft, which runs on a 50 HP machine, or 8.4 ft, which needs 60 HP. Four-way means the blade pivots horizontally and vertically up to 60 degrees - it angles and it lifts, but it does not tilt side to side. If you need to cut a slope or a crown, the tilt plate version is the model to buy, and it is a separate listing. What the Pro does carry is every one of Skeer's core patents: traction level adjustment sets the cutting edge level with the bottom of your tracks when the arms are down, so the blade returns to grade on its own instead of being re-levelled each time it is set down, and the patented floating base rides the surface without gauge wheels and without grabbing. The flat Hardox 450 edge stays in constant ground contact and is sharp in reverse, so the back-drag pass grades and packs rather than being wasted travel. The Pro is laser-indicator ready, so a receiver, mast, transmitter and tripod can be added later without replacing the blade, and its electrical controls and harness ship with it.
Contractors comparing a powered skid steer grader against a simple skid steer grader blade usually land here, because the 4-way Pro is the point at which a grader attachment for skid steer work starts behaving like a machine rather than a scraper. Used as a skid steer driveway grader it re-cuts crown and shoulder in one pass; used as a general skid steer grading attachment it brings a rough lot to a flat finish. Because it mounts on the universal quick attach plate it serves equally as a Bobcat grader attachment or on Cat, Deere, Case and Kubota loaders, and every Skeer blade shares the same patented traction level adjustment underneath.
⚙ Key Features of the Skeer Pro Skid Steer Grader Attachment
- 4-way blade control, 60 degree pivot — The blade pivots horizontally and vertically up to 60 degrees, which covers angling for windrows and lifting for material moving. Side-to-side tilt is the 6-way tilt plate model, not this one.
- Patented traction level adjustment — The cutting edge is referenced to the bottom of the tracks with the loader arms down, so the Pro comes back to grade every time it is set on the ground.
- Patented floating base — The base floats over the surface to hold the cut level without gauge wheels, and it is what stops the edge grabbing and digging in at speed.
- Hardox 450 replaceable flat cutting edge — Abrasion-resistant Hardox 450 in a flat profile, replaceable when worn, in constant contact with the ground for a consistent cut.
- Laser-indicator ready — The Pro runs fully manual out of the crate and accepts a laser receiver and mast later, so laser indication is an upgrade rather than a re-purchase.
- Grades and compacts in reverse — The edge cuts going backwards, and tilting the blade forward on the reverse pass packs the material and exposes any imperfection.
- Electrical controls included — Every Pro ships with its electrical harness and in-cab control, so the blade functions are on the joystick rather than requiring a separate switch box purchase.
- Polymer central blade pivot — The central pivot runs on high-grade polymer rather than steel on steel, which reduces wear and slop in the pivot over time.
- Powder coated finish — Powder coat resists chipping and corrosion from abrasive spoil and washdown.
🔑 Why Contractors Choose the Skeer Pro
- The lowest-cost route into the Skeer system — The 4-way Pro carries the same traction level adjustment and floating base as every blade in the range, without paying for a tilt plate you may not need on flat pad work.
- Removes the re-levelling pass — Traction level adjustment eliminates the setup most blades need every time they touch down, which on a pad is repeated dozens of times a day.
- Buy manual now, add laser later — Because the Pro is laser-indicator ready as standard, a contractor can start manual and add a receiver, mast and transmitter when a job justifies it, without replacing the blade.
- Every return pass is a working pass — A reverse-sharp edge turns back-dragging from wasted travel into a grading and packing pass.
- Width matched to the machine you own — The 7 ft model runs on a 50 HP loader and the 8.4 ft on 60 HP, so the blade can be sized to the carrier instead of forcing a machine upgrade.
📊 Skeer Pro Specifications
| Specification | Value |
|---|---|
| Model | Pro (Skeer 4-way PRO) |
| Working widths | 7 ft or 8.4 ft |
| Minimum machine horsepower | 50 HP (7 ft) / 60 HP (8.4 ft) |
| Blade control | 4-way: horizontal and vertical pivot up to 60 degrees |
| Side-to-side tilt | Not fitted - see the 6-way tilt plate model |
| Cutting edge | Hardox 450, flat profile, replaceable |
| Grading modes | Fully manual, laser-indicator ready |
| Base | Patented floating base |
| Level adjustment | Patented ground traction level adjustment |
| Central pivot | High-grade polymer |
| Operation | Forward and reverse |
| Finish | Powder coated |
| Mount | Universal skid steer quick attach (SSQA), adjustable |
| Hydraulic flow | 15-25 GPM standard flow |
| Controls | Electrical controls and harness included |
| Warranty | 1 year parts and labour (Skeer System) |
🔄 Skeer Pro Specifications by Model
| Specification | 7' Pro | 8.4' Pro |
|---|---|---|
| Working width | 7 ft | 8.4 ft |
| Minimum machine horsepower | 50 HP | 60 HP |
| Blade control | 4-way, 60 deg pivot | 4-way, 60 deg pivot |
| Side-to-side tilt | Not fitted | Not fitted |
| Hydraulic wings | None | None |
| Cutting edge | Hardox 450 replaceable | Hardox 450 replaceable |
📋 Options and Accessories for the Skeer Pro
- Side plates (pair) — Bolt-on side plates keep material in front of the blade instead of spilling out the ends, which matters when you are carrying material across a pad rather than just cutting.
🚜 Which Machines Fit the Skeer Pro?
The Skeer Pro mounts on a Universal Quick Attach (SSQA) plate, the standard mount fitted to skid steer loaders and compact track loaders, including:
BobcatCaterpillarJohn DeereCaseNew HollandTakeuchiKubotaGehl
Compatibility is decided by mount type rather than brand. Your machine needs a standard SSQA plate, 15-25 GPM standard-flow auxiliary hydraulics, and a minimum of 50 HP for the 7 ft model, 60 HP for the 8.4 ft. The electrical side is brand-sensitive: the universal wiring harness covers John Deere, Caterpillar, Case, Gehl, Kubota, Takeuchi, ASV and New Holland among others, while Bobcat machines use a different connector and take the Bobcat harness. Everything needed to confirm fitment is on this page — add it to your cart to check delivered pricing for your address.
On delivery: inspect the crate before you sign the Bill of Lading and note any damage on it. A signed clean BOL makes a freight damage claim very hard to pursue, so photograph anything that looks wrong before the driver leaves.
❓ Skeer Pro Questions, Answered
Should I buy the 7 ft or the 8.4 ft Pro?
Machine horsepower decides it. The 7 ft Pro needs a minimum of 50 HP; the 8.4 ft Pro needs 60 HP. If your loader clears 60 HP, the 8.4 ft covers more ground per pass and is the better choice on open pads and driveways. On a machine between 50 and 60 HP, or where you work between buildings and inside fence lines, take the 7 ft.
Is the Skeer Pro a 4-way or a 6-way blade?
The Pro on this listing is the 4-way model: the blade pivots horizontally and vertically up to 60 degrees, so it angles and lifts, but it has no side-to-side tilt. The 6-way version adds a tilt plate giving 13 degrees of tilt each way and 30 degrees of swivel, and it is sold as the Skeer Grading Blade with Tilt Plate. If your work involves designed slopes, crowns or drainage falls, buy the 6-way.
Does the Skeer Pro come with laser guidance?
No - the Pro ships as a manual blade that is laser-indicator ready. All the mounting provision is built in, and a Topcon LS-B200W 360-degree receiver, a Topcon RL-HV2S dual slope laser transmitter and an HD adjustable tripod with a 16 ft aluminium rod can be added. Laser indication tells the operator when the blade is off grade; the operator still makes the correction.
Do I need to buy a control kit for the Pro?
No. Electrical controls and the wiring harness are included with every Pro, so blade functions are operated from the joystick in the cab. There is no separate switch kit to purchase for standard operation. Bobcat machines need a 7-to-14 pin adapter because they use a different connector.
How is the Pro different from the Skeer Beam?
The Beam is a fixed 8.4-foot blade with no pivot at all and a 40 HP minimum. The Pro adds 60 degrees of horizontal and vertical pivot, laser-indicator readiness and a choice of two widths, and asks for 50 to 60 HP. If you only push and level flat, the Beam does it; if you want to angle the blade, you want the Pro.
What if I need more than 8.4 ft of width?
Step up to the Skeer Pro Plus, which adds 30-inch hydraulic wings to a 7 ft centre beam for up to 12 ft of working width, or the Pro Plus OS, which extends an 8.4 ft beam to 13.4 ft. Both need more horsepower - 60 HP and 90 HP respectively.
Will the Pro fit my Bobcat, Cat or John Deere machine?
The Pro mounts on the universal skid steer quick attach plate (SSQA) used by Bobcat, Caterpillar, John Deere, Case, New Holland, Takeuchi, Kubota and Gehl, so fitment depends on mount type rather than badge. Bobcat machines use a different electrical connector and need a 7-to-14 pin adapter for the blade controls.
Can I replace the cutting edge myself?
Yes. The Pro uses a bolt-on Hardox 450 flat cutting edge, and Skeer supplies replacement cutting edge kits for both the 7 ft and 8.4 ft blades as stocked parts. It is a yard job rather than a workshop booking.
What is covered by the warranty?
Skeer System provides 1 year of parts and labour on all products sold. The Hardox 450 cutting edge is a wear item and is treated as a consumable rather than a warranty part.
How does the Pro ship?
The Pro ships by LTL freight. Shipping is calculated at checkout - add the model you want to your cart and enter your delivery address, and the freight charge is shown before you complete the order. Lift gate service is available for residential deliveries and can be selected at checkout.
Shipping
The following are estimated processing and delivery times. We make every effort to fulfill orders as quickly as possible.
We only deliver within the United States. If a package can’t be delivered due to an error entering your shipping address, Eskidsteer is not responsible for any additional fees that may incur to reroute or reship the package.
By placing an order through this Website you will be agreeing to the terms below. These are provided to ensure both parties are aware of and agree upon this arrangement to mutually protect and set expectations for our service. Please read our Terms of Service.
How do I place an order?
We do not take orders on the phone for security reasons. To place an order, go to a product page, select the desired quantity of the item, and add it to your cart via the “Add to Cart” button. During checkout, you just need to enter or confirm your shipping address and credit card information, then you can place your order
Shipping fee:
Delivery Time= Handling time +Transit Time:
Handling time: 3-3 Days
Transit time: 5-8Days
Order cut off Time: 5:00 PM (GMT-05:00) Eastern Standard Time (New York)
Which shipping carriers do you use to ship?
All Shipments are done with LTL Carriers, UPS, FedEx, DHL, and USPS
Failure to Accept Products on Delivery
If you reject delivery of goods ordered from us, or otherwise fail to accept delivery of the goods, you agree to pay for all related and additional shipping fees, duties, taxes, restocking fees and other charges arising from such failure to accept delivery. After such failure to accept delivery of the goods, it shall be your responsibility to pay for and arrange a new shipping date.
Tracking Information:
We also provide tracking numbers for all orders. Once your order has been shipped, we will provide you with a tracking number that you can use to track the progress of your package. You will receive this tracking number via email.
We understand the importance of knowing the status of your order, and we strive to provide you with transparent and reliable tracking information. If you have any questions or need assistance with tracking your order, please don’t hesitate to contact our customer support team. We’re here to help!.
Can I ship to multiple addresses?
At this time, we cannot ship to multiple addresses in one order. Please place separate orders on support@eSkidsteer.com to ship to different addresses. If you need assistance, please contact our Customer Service.
Wrong Address:
Please review and ensure that you have entered the correct address. We are not responsible for non-delivery due to errors in the address that you provide. If an order is returned due to an incorrect address, we will refund the original order (excluding the shipping fee) and ask that you re-submit your order.
Change of Address:
If your item hasn’t yet been shipped, you may change your delivery address by emailing at support@eSkidsteer.com. Please note that we are not obligated to ensure changes to the delivery address after the item has been delivered.
If you have any questions or require further assistance regarding the shipping policy, please do not hesitate to contact our customer support team.
Phone: +1 8667578337
Email: support@eSkidsteer.com
Address: 30 North Gould St Suite R, Sheridan, WY 82801, USA
Returns
Returns
We offer returns and exchanges in limited circumstances as follows:
- In order to submit a return, you must contact us by email at support@eSkidsteer.com for us to confirm the items ordered are eligible for return or exchange;
- To be eligible for a return, you must commence the return process within 30 days of your item being delivered to you and:
- it must be unused, for example, once an item is hooked up to an attachment plate, hydraulic lines or electrical connection, it will not be eligible for return. Likewise, if your item shows any sign of use, which we may determine in our sole and absolute discretion, we will not accept the return;
- it must be in the same condition you received it in. You will be required to send us timestamped photos of the condition of your items as a condition to determine your eligibility for the return or exchange; and
- it must be returned in the same packaging or containers as it was received in.
We do not accept returns for products that were listed as final sale items at the time of purchase.
You agree to pay a 25% restocking fee on all returns, which we will deduct from any refund owing to you.
After the above referenced 30-day period, unfortunately we cannot offer you a refund or exchange, under any circumstances.
If your return or exchange is approved, we will provide instructions on shipping your items back to us or the applicable supplier via email.
You agree that you shall be responsible for all return shipping costs and related expenses.
Our shipping cost to you is not refundable.
You are also responsible for ensuring the items are carefully packaged for shipment and that risk of loss or damage during return shipping shall be your sole liability. You may wish to obtain insurance while the returned items are in transit.
Lost or Damaged
If the item is damaged when you receive it, do not sign the proof of delivery, and contact us immediately at support@eSkidsteer.com. If you sign the proof of delivery form, you cannot later claim the item was lost (i.e. not delivered) or damaged on arrival.
If the item is damaged on arrival take photos of the damage with a time stamp.
In the event the item is lost or damaged on arrival, we will assist you with filing a reimbursement claim directly with the applicable supplier or shipping company as applicable. However, you agree that as we are not the direct supplier of the items, it shall be your responsibility to pursue any claims with the applicable supplier in the event your lost or damaged item is not replaced by the supplier or carrier.
No Warranties Offered by Us
Everything on the Website, including all products available for order, are provided "as is" without warranty of any kind from us, including all implied warranties and conditions of merchantability and fitness for a particular purpose. We hereby disclaim all warranties and conditions of any kind, whether express, implied or statutory.
You acknowledge that we do not manufacture the products made for sale on the Website and that such products and the individual components thereof, are made by third party manufacturers.
Warranties Offered by Third Parties
Our third party suppliers and manufacturers may offer limited warranties on certain products sold on the Website. You may contact us and we can refer you to the applicable supplier or manufacturer if you wish to inquire about the details of any such warranties offered by those third parties. You agree that we shall not be liable or responsible for any warranties granted by such third parties.
To the extent products you order from us have warranties provided by a third party supplier or manufacturer, upon your request we agree to reasonably assist with the submission of warranty claims to such third parties. However, we make no guarantees that any warranty claims will be successful. You agree it is your responsibility to ensure warranty claims are submitted within the applicable timeframe to the applicable supplier or manufacturer.
- Choosing a selection results in a full page refresh.