Pro Plus Skid Steer Grader Attachment - Skeer

📘 Overview

The Pro Plus is a skid steer road grader attachment that takes a 7-foot centre beam out to 12 feet on two 30-inch hydraulic wings that retract from the cab, on a machine of 60 HP or more. It is the 4-way model: the blade pivots horizontally and vertically up to 60 degrees and the wings adjust independently, but there is no side-to-side tilt plate - that is the 6-way version, sold separately. The wings are what this blade is for. Each one can be angled on its own while the centre section stays level, so a shoulder or a windrow is formed in the same pass as the pad, and both retract hydraulically so a 12-foot blade still travels and still fits through a site gate. Underneath, the Pro Plus runs the same Skeer fundamentals as the rest of the range: patented traction level adjustment that references the cutting edge to the bottom of the tracks, a dynamic floating base that holds grade without gauge wheels, and a flat sharp profile that resists digging and holding in forward and reverse. An 8-inch Hardox 450 replaceable cutting edge runs the full width. This is a single-configuration listing; electrical controls are included and laser components can be added.

At 12 feet the Pro Plus is a different tool from a standard skid steer grader attachment. Crews searching for a skid steer land leveler, or simply a skid steer leveler for large pads, generally need this width rather than a seven-foot blade, and as a skid steer driveway grader it finishes a long approach in a single pass. It is not a 6 way dozer blade - the tilt plate version is a separate Skeer model - but as a wide-format skid steer grader it has no equivalent anywhere else in the range.

⚙ Key Features of the Skeer Pro Plus Skid Steer Road Grader Attachment

• Two 30-inch retractable hydraulic wings — The wings extend the 7 ft centre beam to 12 ft of working width and retract from the cab for transport and for working past obstacles - no stopping and no manual pinning.
• Independently adjustable wings — Each wing can be set to its own angle while the centre section stays level, so a shoulder, a windrow or a compound fall is cut in one pass.
• 4-way control, 60 degree pivot — The blade pivots horizontally and vertically up to 60 degrees. Side-to-side tilt is the 6-way tilt plate model, not this one.
• 8 inch Hardox 450 replaceable cutting edge — A full-width 8-inch edge in abrasion-resistant Hardox 450 that unbolts for replacement rather than being welded in.
• Dynamic floating base — The base adapts to the terrain continuously so the operator is not correcting blade height between passes, and it is what stops the edge grabbing.
• Patented traction level adjustment — Hydraulic traction level adjustment references the cutting edge to the bottom of the tracks with the arms down, so the blade lands at grade.
• Flat sharp knife profile — The flat profile produces the finish and resists digging or holding, in forward and in reverse.
• Electrical controls included — The in-cab electrical controls and harness ship with the unit, so wing and blade functions run from the joystick.
• Powder coat finish — Powder coating resists the chipping and corrosion that abrasive material and washdown cause.

🔑 Why Contractors Choose the Skeer Pro Plus

• Nearly doubles coverage per pass — Going from a 7 ft beam to 12 ft of working width cuts the number of passes across an open pad substantially, which is where the machine time on a site pad actually goes.
• Narrows for the gate, widens for the pad — Because the wings retract hydraulically from the seat, the same blade travels through a residential gate and then grades 12 ft wide, without a second attachment.
• Cuts a shoulder in the same pass as the pad — Independently angled wings mean the fall at the edge and the flat in the middle are formed together instead of requiring a separate trim pass.
• Full-width edge replaces as a wear part — The 8-inch Hardox 450 edge unbolts across the full width, so a worn edge is a yard job rather than a workshop booking.
• Rough and finish work from one attachment — 60 degrees of pivot in both planes covers aggressive material moving and final trim, so the blade is not left on the trailer for half the job.

📊 Skeer Pro Plus Specifications

📋 Options and Accessories for the Skeer Pro Plus

• Electrical harness and Bobcat adapter — Because the wings are hydraulic and controlled from the cab, the Pro Plus depends on its electrical harness more than a fixed blade does. The harness ships with the attachment; Bobcat owners additionally need the 7-to-14 pin adapter to match their machine connector.
• Side plate kit — Side plates hold material in front of the blade rather than letting it spill past the wing ends when you are carrying rather than cutting.
• Topcon LS-B200W 360 degree laser receiver — Picks up the transmitter beam from any direction, so the machine does not have to stay oriented to the laser.
• Topcon RL-HV2S dual slope laser transmitter — Sets slope on two axes at once, which is what a crowned pad or compound fall requires.
• HD adjustable tripod with 16 ft aluminium rod — Heavy-duty adjustable tripod and grade rod for setting the transmitter and checking grade across a site.
• Extended mast — Carries the laser receiver above the blade at the height the transmitter beam is set to.

🚜 Which Machines Fit the Skeer Pro Plus?

The Skeer Pro Plus mounts on a Universal Quick Attach (SSQA) plate, the standard mount fitted to skid steer loaders and compact track loaders, including:

Compatibility is decided by mount type rather than brand. Your machine needs a standard SSQA plate, 18-25 GPM standard-flow auxiliary hydraulics, and a minimum of 60 HP. The electrical side is brand-sensitive: the universal wiring harness covers John Deere, Caterpillar, Case, Gehl, Kubota, Takeuchi, ASV and New Holland among others, while Bobcat machines use a different connector and take the Bobcat harness. Everything needed to confirm fitment is on this page — add it to your cart to check delivered pricing for your address.

❓ Skeer Pro Plus Questions, Answered