-
$6.00 Off
$54.99 List Price:
$60.99🔎OEM interchange 📦Crated 📘 Overview Bobcat cab glass replacement — left Hand Sliding Cab Glass — the Bobcat replacement for OEM 7266740, cut to 15.5" X 19". It covers 4 published Bobcat models, listed in full further down this page. The pane installs into... -
$14.00 Off
$132.99 List Price:
$146.99Pengo by Paladin Three drill points Fits Aggressor & TriMax Overview This Pengo carbide tipped auger pilot bit — the Carbide Tipped Triflow Auger Bit Pilot Tooth (TF-350C, part number 135090) — is the pilot that leads a Pengo auger into the ground. It... -
$18.00 Off
$122.99 List Price:
$140.99🔧Activates high flow circuit 🔌Plugs into the 14 pin connector 🚜Cat D-Series, Next Gen, Develon 📘 Overview The SG-CTHF-14 high flow plug activates the high-flow hydraulic circuit on Caterpillar D-Series, Next Gen and Develon skid steer loaders. It installs into the machine's 14-pin connector... -
$60.00 Off
$593.99 List Price:
$653.99260× stronger than the glass it replaces — at half the weight. SHIELDS® Lexan® polycarbonate, formed to the exact shape of your Bobcat windshield. Drops into the factory opening, reuses your existing hardware, and stays in the frame when something hits it. ✓ Guaranteed... -
$8.51 Off
$85.99 List Price:
$94.50🔎OEM interchange 🔧Complete kit 📘 Overview John deere skid steer bucket pin kit replacement — john Deere skid steer pin kit — built to the OEM T342204K specification. It covers 13 published John Deere models, listed in full further down this page. Every component... -
$10.00 Off
$63.99 List Price:
$73.99🔩All sockets and seals 🔧Attachment side 🚜John Deere 3 pin 📘 Overview A complete Deutsch HD 3-pin female connector kit for the John Deere round attachment-side connector. Sockets, seals and body components are all included for a full build or rebuild. It is the... -
$35.00 Off
$348.99 List Price:
$383.99🔗Converts between standards 📘 Overview Haugen skid steer auger bits in five series, sized 4" to 48", in 2" Hex or 2 9/16" Round shaft. The series is chosen by ground condition, not by preference — a fabricated head in rock will not last,... -
$3.00 Off
$25.99 List Price:
$28.99Pengo by Paladin Soil rating 5–6 Exclusive to the BoRH head Overview These Pengo rock auger bullet teeth — the P21 RR conical tooth, stocked as PG-137990 — are designed exclusively for the Pengo BoRH bolt-on rock head. Each tooth weighs 0.59 lb and... -
$43.00 Off
$289.99 List Price:
$332.99🔌Plug and play 🔧2 switched ports 🚜Fits most 14 pin loaders 📘 Overview The SG-BC14-JD03A lets a 14-pin loader run John Deere 3-pin controlled attachments. The 14-pin end plugs into the machine, the round John Deere 3-pin end plugs into the attachment, and two... -
$139.00 Off
$931.99 List Price:
$1,070.99🔧6 switched outputs 🔌Plugs into 7 pin Trident 🚜Loaders, Toolcat, Versahandler 📘 Overview The SG-CAN60-14 lets a Bobcat 7-pin CAN machine run attachments that were never built to speak Bobcat's control language. It plugs into the 7-pin Trident connector, reads the CAN messages your... -
$51.00 Off
$343.99 List Price:
$394.99🔧2 switched outputs 📅SVL machines before 2018 🔌Genuine Deutsch connectors 📘 Overview The SG-KB-01 is the machine-side control harness for Kubota SVL75, SVL90 and SVL95 compact track loaders built before 2018. It provides two switched outputs, a keyed 12-volt supply and a ground, installs... -
$9.00 Off
$396.99 List Price:
$405.99Made in USA 12-mo warranty Overview These are Digga’s auger extension outer bars, fitting between the drive and the auger bit to add drilling depth without buying a longer auger. Two hub sizes are covered: 2" hex in 2, 3, 4, 6 and 8... -
$11.00 Off
$103.99 List Price:
$114.99🔎OEM interchange 🔧Complete kit 📘 Overview John deere bucket pin kit replacement — pin Kit — the John Deere replacement for OEM T259580PK. It covers 5 published John Deere models, listed in full further down this page. Every component interchanges with the original, so... -
$5.00 Off
$334.95 List Price:
$339.95Machine: Case Skid Steer LoaderMaterial: Heavy-duty vinyl-coated nylon | 40-mil clear vinyl windowsDoor: Included — full-size vinyl window + cold-weather bottom flapInstallation: Installs in minutes — no drilling or permanent modifications 📋 Overview Keep your Case Skid Steer Loader operator dry, warm, and productive... -
$2.00 Off
$14.99 List Price:
$16.99Pengo by Paladin Soil rating 5–6 Severe Rock Ripper standard Overview These Pengo rock auger teeth — the S-RL08 standard rock tooth, stocked as PG-990021 — are the conical teeth supplied as standard on the Pengo Severe Rock Ripper auger. Each weighs 0.7 lb... -
$1.00 Off
$32.99 List Price:
$33.99Made in USA Direct fit Overview Of the auger teeth on a Digga A4 cutting head, the TS-3 outer tooth is the one that wears fastest. The outer position travels the largest circumference per revolution, so it covers more ground and more material than... -
$60.00 Off
$591.99 List Price:
$651.99260× stronger than the glass it replaces — at half the weight. SHIELDS® Lexan® polycarbonate, formed to the exact shape of your CAT windshield. Drops into the factory opening, reuses your existing hardware, and stays in the frame when something hits it. ✓ Guaranteed... -
$3.00 Off
$137.99 List Price:
$140.99Made in USA Direct fit Overview This tungsten auger pilot is the PM-SQ-3 from Digga’s A4 Heavy Conditions set — the same square drive as the steel PM-SQ-1, with tungsten on the cutting point. It is the pilot supplied on Heavy Conditions A4 bits... -
$60.00 Off
$591.99 List Price:
$651.99260× stronger than the glass it replaces — at half the weight. SHIELDS® Lexan® polycarbonate, formed to the exact shape of your CAT windshield. Drops into the factory opening, reuses your existing hardware, and stays in the frame when something hits it. ✓ Guaranteed... -
$43.00 Off
$289.99 List Price:
$332.99Skid Steer Electrical Adapter Ordering Guide - 8/14 Pin Only Electrical compatibility should not limit which attachments can be used on a skid steer. The Skid Steer Electrical Adapter Ordering Guide - 8/14 Pin Only is designed to connect compatible Bobcat attachments to Cat,...
SHOP SKID STEER ATTACHMENTS FOR SALE BY TYPE
CHOOSING THE RIGHT SKID STEER ATTACHMENT
Define Your Primary Purpose
Choosing the right tool starts with knowing the job. Are you moving material? Buckets and pallet forks get it done. Clearing land? Go for brush cutters or root grapples. Drilling or trenching? You’ll want augers and trenchers. Whatever the job, we’ve got skid loader attachments built to match it.
Match To Your Skid Steer’s Specs
Before anything else, double-check the basics. Will the attachment overload your machine? Does your coupler system fit the design? Some tools like augers or brush cutters demand high-flow hydraulics. Play it smart and choose attachments for a skid steer that match your model’s limits.
Prioritize Build Quality And Materials
Reinforced steel. Solid welds. Clean design that doesn’t crack under pressure. We only carry skid steer attachments built to last from names that know the trade: Bobcat, Depco, Skid Steer Genius.
Think About Long-Term Versatility
Is this one job, or five? The best gear adapts. An adjustable pallet fork can move pallets today, then lift beams, logs, and slabs tomorrow. Choose attachments for skid steer that stay useful long after the first project wraps up.
WHY BUY SKID STEER ATTACHMENTS FROM ESKIDSTEER.COM
Unmatched Expertise
You’re not just buying a part. You’re getting real advice from a team that’s worked in the field. When it comes to skid loader attachments, we know what works.
Quality You Can Count On
Everything we carry is built to perform. You’ll find skid steer attachments for sale that can take hits, haul weight, and keep going through tough conditions.
Transparent Pricing
No guesswork. No gimmicks. Just clear pricing on reliable skid steer attachments for sale, backed by people who actually answer the phone when you call.
Fast Nationwide Shipping
Need it fast? You’ve got it. We ship skid steer accessories quickly across the U.S. so your job site never has to wait on gear.
Personalized Customer Support
Got a question about fit, flow, or function? We don’t script responses. We listen, troubleshoot, and guide you to the right call for your machine.
NEED HELP CHOOSING THE RIGHT SKID STEER ATTACHMENT?
Not sure which attachment fits your machine or the work ahead? Our team is here to help. No fluff, no confusion, just real answers from people who know skid steer attachments inside and out.
Contact Us →
FAQs
Are skid steer attachments universal?
Not all skid steer attachments fit every machine. Compatibility depends on coupler type, hydraulic flow, and overall lift capacity. Always double-check the specs.
Can all skid steers use the same attachments?
Some models share mounts, but not all. Always confirm connection type and capacity before you buy. That’s true even with general-purpose skid steer equipment.
How do I know if a skid steer attachment will fit my machine?
Check your owner's manual or model page for coupler size, hydraulic requirements, and lift limits. The right skid steer attachments won’t make you guess.
How do I maintain my skid steer attachments?
Clean off debris, check welds, and grease all moving parts. If you're using skid steer accessories daily, a regular maintenance habit will keep them working longer.
How long do skid steer attachments usually last?
With solid care and storage, quality skid steer attachments can last years. Some gear sees heavy action daily, so condition depends on use, not just time.
Are these attachments compatible with my skid steer brand?
Yes. Most of our attachments use the Universal Skid Steer Quick Tach system, making them compatible with major brands like Bobcat, Cat, John Deere, Kubota, and Case. Always check your machine's hydraulic flow (GPM) against the attachment's requirements.
Do I need high-flow hydraulics for these attachments?
It depends on the tool. Standard attachments (buckets, forks) run on standard flow (10-25 GPM). High-performance tools like forestry mulchers or large cold planers require a "High Flow" hydraulic system (26-40+ GPM). Check the product specs for details.
What is the difference between standard and extreme duty?
Standard duty is designed for general use like dirt and gravel. Extreme duty attachments feature thicker steel (often AR400), reinforced welding, and additional wear protection for harsh environments like demolition and concrete work.
CUSTOMER SUPPORT
If you need support, we’re here to help.
Mon-Fri: 8am-4:30pm CT
Sat-Sun: Closed
You can also email us for customer service or product support.
support@eskidsteer.com
Call or Text
To place a new order or for assistance with an existing order call or text us at
+1 (866) 757-8337
Live Chat
Have questions or need help?
Chat with us using the icon in the bottom left.
Start new chat
- Choosing a selection results in a full page refresh.