-
$6.00 Off
$39.99 List Price:
$45.99Deutsch Hobby Crimping Tool for 14–18 AWG Connectors Reliable connector repairs depend on a properly formed crimp. The Deutsch Hobby Crimping Tool for Connectors SG-DCT16-100 is designed for crimping 14–18 AWG pins and sockets used in Deutsch-style electrical connectors. Its primary application is the... -
$6.00 Off
$39.99 List Price:
$45.99Hobby Deutsch Crimping Tool – SG-DCT12-100 Reliable electrical repairs start with a crimp matched to the contact. The Hobby Deutsch Crimping Tool is designed for Deutsch HD #12 contacts used in 8-pin connectors on compatible machines and attachments, including Cat, ABC, ASV, and Terex... -
$3.00 Off
$19.99 List Price:
$22.99Delphi Metri-Pack Terminal Removal Tool Electrical connector service requires the correct release tool. The Delphi Metri Pack Pin Removal Tool SG-DP150T-100 is designed to extract Delphi Metri-Pack terminals from compatible connectors in the 150-series and 280-series families. It provides a controlled method for releasing... -
$6.00 Off
$44.99 List Price:
$50.99🔧Trident crimping 🔩Signal and power 🚜Bobcat 7 pin 📘 Overview A professional crimping tool for ITT Trident 7-pin connectors, covering both the CAN signal and power contacts used on Bobcat machines and attachments. One tool for both contact sizes in the Trident connector, for... -
$26.00 Off
$171.99 List Price:
$197.99Single Channel Latching Controller 9 Amp – SG-LSC1-100 Keep an electrical function switched on without holding a control button. The Skid Steer Genius Single Channel Latching Controller 9 Amp provides one latching output: toggle it on, and the controller holds the output until it... -
$5.00 Off
$34.99 List Price:
$39.99Skid Steer RAM Mount Phone Holder RAP-B-404UKeep essential electronics positioned within reach while operating a skid steer. The Skid Steer RAM Mount Phone Holder RAP-B-404U uses a RAM 1-inch ball and round base to create an in-cab mounting point for compatible phones, controllers, and... -
$5.00 Off
$34.99 List Price:
$39.99Skid Steer RAM Mount Phone Holder – RAP-B-400U The Skid Steer RAM Mount Phone Holder RAP-B-400U provides a stable mounting point for a phone or compatible device inside a skid steer cab. Designed around RAM’s standard 1-inch ball system, this flat-base mount supports surface-mount... -
$2.00 Off
$10.99 List Price:
$12.99Ball Adapter Plate RAM Mount - RAP-B-236U The Ball Adapter Plate RAM Mount RAP-B-236U adds a practical mounting point for control boxes, displays, switches, and other electronic equipment inside a skid steer cab. Built around the RAM 1-inch ball system, this rectangular adapter plate... -
$2.00 Off
$15.99 List Price:
$17.99RAM Mount Short Socket Arm RAP-B-201U-A Limited cab space requires a mounting solution that provides adjustment without adding unnecessary reach. The RAM Mount Short Socket Arm RAP-B-201U-A is a compact double-socket arm designed to join two compatible RAM 1-inch balls. It is suited to... -
$2.00 Off
$15.99 List Price:
$17.99RAM Mount Double Socket Arm – RAP-B-201U The RAM Mount Double Socket Arm RAP-B-201U provides a practical connection between two RAM 1-inch balls. Designed for adjustable equipment mounting, this double socket arm lets operators position phones, displays, controls, and other compatible devices where they... -
$1.00 Off
$4.99 List Price:
$5.99Replacement Base Magnet for Skid Steer Genius Accessories A worn or damaged magnet can reduce the reliability of an otherwise useful in-cab accessory. The Replacement Base Magnet SG-MG1-100 restores the magnetic mounting point used with compatible Skid Steer Genius accessories, helping keep equipment positioned... -
$4.00 Off
$27.99 List Price:
$31.99🛡Weatherproof 🔩8 or 14 pin 🚜Machine side 📘 Overview A weatherproof dust cap for Deutsch HD 8-pin and 14-pin machine-side receptacles. It covers the male machine port whenever no attachment is connected, keeping dirt, water and debris out of the pin faces. One cap... -
$18.00 Off
$117.99 List Price:
$135.99💧Enhanced high flow 🔌Case and New Holland ⚠Not interchangeable 📘 Overview The SG-CSHF-14 is the enhanced high-flow plug for Case and New Holland skid steer loaders. It provides the connection that activates the machine's high-flow hydraulic circuit for demanding attachments. This is not the... -
$116.00 Off
$779.99 List Price:
$895.99🔧6 button outputs 🔌Complete kit — wiring included 🚜Kubota SVL75 / 90 / 95 📘 Overview The SG-KB-01-PRO-KIT is the complete machine-side control harness for Kubota SVL75, SVL90 and SVL95 compact track loaders, giving six button-controlled auxiliary functions. It ships as a full kit... -
$43.00 Off
$289.99 List Price:
$332.99🔌Plug and play 🔧MAC 8 pin to 14 pin 🚜Bobcat 14 pin 📘 Overview The SG-MC8-BC14 connects a MAC Swing Steer 8-pin attachment to a loader with a standard Deutsch HD 14-pin machine port. MAC uses its own 8-pin attachment connector, which does not... -
$46.00 Off
$303.99 List Price:
$349.99🔀4 in, 10 out 🔧Signal multiplexer 🚜Cat D-Series 📘 Overview The SG-CT6-BC10 takes up to four Caterpillar D-Series 14-pin machine outputs and expands them into ten independent solenoid channels through a Bobcat-style 14-pin output connector. It exists because Caterpillar machines supply relatively few analog... -
$4.00 Off
$24.99 List Price:
$28.99Deutsch 2 Pin Power Plug Adapter for Skid Steer Accessories The Deutsch 2 Pin Power Plug Adapter - SG-FP2-2P provides a straightforward way to connect a standard 2-pin power trailer plug to a Deutsch 2-pin female connector. Designed for compatible 12V accessories, this adapter... -
$2.00 Off
$12.99 List Price:
$14.99📏Extension 🔌PS/2 MD6 male to PS/2 MD6 female 🕹Super Controller 📘 Overview The PS2-MD6-M/F is a extension joystick cable extension with a PS/2 MD6 male on one end and a PS/2 MD6 female on the other. It extends the joystick cable on a Super... -
$23.00 Off
$151.99 List Price:
$174.99🔩Complete rebuild 🔧Attachment side 🚜Bobcat 7 pin Trident 📘 Overview The ultimate rebuild kit for the Bobcat 7-pin Trident male connector — the attachment side. It includes every component needed for a full rebuild rather than the connector body alone. Choose this over the... -
$23.00 Off
$151.99 List Price:
$174.99Complete Bobcat 7-Pin Trident Female Rebuild Kit The Trident 7 Pin Female Ultimate Kit - SG-KIT-TRIDENT-UF provides the components required to rebuild the machine-side female connector used with Bobcat 7-pin Trident systems. Designed for repair and replacement work, this complete kit helps address worn,...
- Attachments
- Attachments
- Go to Attachments
-
Skid Steer Attachments
- Skid Steer Attachments
- Go to Skid Steer Attachments
- 3-Point Adapters
- Augers
- Bale Spears
- Beach Cleaners
- Booms
- Brooms
- Buckets
- Concrete Mixers
- Concrete Breakers
- Concrete Claws
- Concrete Crushers
- Concrete Dispensers
- Dozer Blades
- Fence Installers
- Forestry Mulchers
- Graders
- Grapples
- Hay Grapples
- Hoppers
- Mowers And Brush Cutters
- Pallet Forks
- Plate Compactors
- Post Drivers
- Power Rakes
- Sand Baggers
- Snow Blowers
- Snow Plows
- Snow Pushers
- Steel Shears
- Tillers
- Tree Shears
- Tree Spades
- Trenchers
- Vibratory Rollers
- Excavator Attachments
- Mini Skid Steer Attachments
-
Telehandler Attachments
- Telehandler Attachments
- Go to Telehandler Attachments
- Spreader Bars
- Swivel Hooks
- Truss Jibs
- Work Platforms
- Buckets
- Bale Handlers
- Accessories
- Accessories
- Go to Accessories
- Skid Steer Accessories
-
Excavator Accessories
- Excavator Accessories
- Go to Excavator Accessories
- Adapters
- Attachment Parts
- Attachment Parts
- Go to Attachment Parts
-
Skid Steer/Excavator Attachment Parts
- Skid Steer/Excavator Attachment Parts
- Go to Skid Steer/Excavator Attachment Parts
- Auger Parts
- Grapples Parts
- Shop By Brands
- Shop By Brands
- Go to Shop By Brands
- Amulet
- Anbo
- Bradco
- Cardinal Canvas Products
- Depco
- Digga
- Equipment Lock
- EZ SPOT UR
- FFC
- Haugen Attachments
- Ideal Rockaway
- Maxx Attachments
- McLaren Industries
- Paladin Heavy
- Pengo Attachments
- Quality Chain
- Roadrunner
- Shields
- Skeer
- Skid Steer Genius
- Stanley
- Star Industries
- Strike Force
- The Silt Fence Plow
- Top Dog Attachments
- Ventures Equipment
- WAIN ROY
- Blog
- About Us
- Contact Us
New products
SHOP NEW PRODUCTS BY TYPE
Date, new to old
- Featured
- Most relevant
- Best selling
- Alphabetically, A-Z
- Alphabetically, Z-A
- Price, low to high
- Price, high to low
- Date, old to new
- Date, new to old
Sort
Results: 1314
Filters
Sort by:
- Featured
- Most relevant
- Best selling
- Alphabetically, A-Z
- Alphabetically, Z-A
- Price, low to high
- Price, high to low
- Date, old to new
- Date, new to old
Sort & Filter
Categories
- 3 Point Adapters
- Amulet Manufacturing
- Anbo
- Anti-Theft Locks & Security Devices for Heavy Equipment
- Attachment Plates And Adapter Systems
- Attachment Racks
- Attachment Racks
- Attachments
- Auger Parts
- Backhoe Loader
- Backhoe Loader Accessories
- Backhoe Loader Buckets
- Backhoe Loader Grapples
- Backhoe Loader Quick Couplers
- Backhoe Loader Replacement Doors & Windows
- Bale Handlers
- Beach Cleaning Machine Attachments
- Best selling products
- Blue Diamond
- Booms & Jibs
Customers Also Viewed
CUSTOMER SUPPORT
If you need support, we’re here to help.
Mon-Fri: 8am-4:30pm CT
Sat-Sun: Closed
You can also email us for customer service or product support.
support@eskidsteer.com
Call or Text
To place a new order or for assistance with an existing order call or text us at
+1 (866) 757-8337
Live Chat
Have questions or need help?
Chat with us using the icon in the bottom left.
Start new chat
- Choosing a selection results in a full page refresh.