Couldn't load pickup availability
The SG-JCB-100 Skid Steer Attachment Control Box 4 is designed to give you up to four convenient electrical control functions from a dedicated handheld control box. It’s ideal for running electrically actuated attachments on machines that don’t have enough built-in auxiliary switches, or where you want simple, intuitive push-button operation.
Housed in a rugged enclosure and built with heavy-duty components, this control box is aimed at professional operators who demand reliable performance in harsh jobsite conditions. Use it to run functions such as angle, tilt, swing, open/close, or any other electrically driven attachment feature supported by your harness and controller.
The SG-JCB-100 control box can be used anywhere you need extra electrical control without modifying machine controls:
Once installed, each button on the control box will activate the corresponding output line, allowing you to control the attachment using your fingertips rather than relying only on machine joystick buttons or limited factory controls.
This control box is intended to be used as part of a properly designed harness and controller setup. Be sure that:
Always verify wiring and function before operating under load. Miswiring or overloading circuits can damage electrical components or attachment systems. If you are unsure about wiring, integration, or electrical loading, consult a qualified technician or refer to your attachment’s and machine’s electrical documentation before use.
This control box lets you operate up to 4 functions on almost any skid-steer attachment — even if your machine lacks built-in electrical controls. It’s ideal when you just need basic, occasional control over attachments.
You plug the control box into your machine’s power (e.g., cigarette lighter), mount it on a metal surface, then connect the box’s cable to the attachment’s 14-pin port (or via adapter if needed). Then you’re ready to operate the attachment.
It works with 14-pin attachments — and also 8-pin attachments if you use a compatible adapter. Typical uses include snow-blowers, brooms, rakes, and other implement-type attachments that require electrical control.
No — installation is straightforward. The box plugs into power and connects to the attachment like a plug-and-play harness. No complex wiring or permanent modifications required.
Not necessarily. This model is ideal for temporary or occasional control use. For permanent installations or frequent heavy use, a more robust controller or harness setup may be more suitable.
Yes — because the control box provides its own power and translates signals for 14-pin attachments, it can make older or less-equipped machines usable with modern electrical attachments.
Ensure the control box is properly powered, the output cable to the attachment is securely plugged in, and that the attachment is compatible with a 14-pin (or adapter-adjusted) connection. Loose plugs or mismatched pinouts are common causes of problems.
Yes — because it's a plug-and-play external box rather than a permanent installation, it’s convenient when swapping attachments. Just unplug and plug in the new attachment as needed.
Thanks for subscribing!
This email has been registered!
