Couldn't load pickup availability
This Y adaptor allows you to use your Cat Dozer Blade on a Bobcat.
Use this adapter to plug directly into your Caterpillar dozer solenoids and then directly into our Canbus controllers to operate on a Bobcat. This adaptor is necessary because Cat uses two opposing solenoids that need to trigger at the same time. By installing this adapter you are tying the trigger points together and allowing just one plug to go to our controller so you will only need to push one button to make it actuate.
The dozer will work by angling side to side without any electronics. Just hook up your hoses. To make the blade tip, you need to trigger the solenoid to move your flow to the secondary cylinders. You will still need to turn on your pump by moving your right joystick toggle from side to side.
This Y adapter is used to operate a Caterpillar dozer blade on a Bobcat machine.
Caterpillar dozer blades use two opposing solenoids that must activate at the same time. The adapter ties both trigger points together so they can be operated with a single control input.
Side-to-side angling works hydraulically without any electronics by connecting the hoses normally.
Tipping the blade requires activating the solenoid to redirect hydraulic flow to the secondary cylinders.
Yes. The hydraulic pump must still be activated using the right joystick toggle.
Thanks for subscribing!
This email has been registered!
