-
$6.00 Off
$45.99 List Price:
$51.99📏60 inches 🔌Deutsch 2-pin male receptacle to 2-pin DIN connector 🚜Skid steer attachments 📘 Overview The SG-DTR-DIN-60 is a 60 inches adapter cable with a Deutsch 2-pin male receptacle on one end and a 2-pin DIN connector on the other. It connects Deutsch 2-pin... -
$5.00 Off
$34.99 List Price:
$39.99📏108 inches 🔌Deutsch 2-pin male receptacle to Deutsch 2-pin female plug 🚜Attachment wiring 📘 Overview The SG-DTR-DTP-108 is a 108 inches cable with a Deutsch 2-pin male receptacle on one end and a Deutsch 2-pin female plug on the other. It extends a single... -
$5.00 Off
$27.99 List Price:
$32.99📏18 inches 🔌Deutsch 2-pin male receptacle to Deutsch 2-pin female plug 🚜Attachment wiring 📘 Overview The SG-DTR-DTP-18 is a 18 inches cable with a Deutsch 2-pin male receptacle on one end and a Deutsch 2-pin female plug on the other. It extends the reach... -
$32.00 Off
$210.99 List Price:
$242.99📏9 feet 🔌two Deutsch 2-pin male receptacles to two spade lug terminals 🚜Attachment wiring 📘 Overview The SG-DTR2A-SP4-9 is a 9 feet cable with a two Deutsch 2-pin male receptacles on one end and a two spade lug terminals on the other. It connects... -
$4.00 Off
$24.99 List Price:
$28.99Adapter Delphi to Deutsch for Skid Steer Solenoid Connections Electrical connector mismatches can delay diagnostics, attachment installation, and routine service. The Adapter Delphi to Deutsch - Skid Steer Genius provides a direct inline solution for connecting a Delphi-equipped component to a Deutsch-equipped harness. Built... -
$4.00 Off
$29.99 List Price:
$33.99🔌Inline adapter 🔧Deutsch to Delphi 🚜Solenoid connections 📘 Overview An inline adapter converting a Deutsch 2-pin female plug to a Delphi 2-pin male receptacle. It connects a Deutsch-equipped controller or harness to a Delphi/Metripak-equipped attachment solenoid. Deutsch and Delphi are both common on skid... -
$10.00 Off
$63.99 List Price:
$73.99📏108 inches 🔌Deutsch 2-pin male receptacle to 2-pin DIN connector 🚜Skid steer attachments 📘 Overview The SG-DTR-DIN-108 is a 108 inches adapter cable with a Deutsch 2-pin male receptacle on one end and a 2-pin DIN connector on the other. It provides extended reach... -
$58.00 Off
$387.99 List Price:
$445.99🎚4 switched channels ➕Supplements existing controls 🚜Any machine 📘 Overview The SG-ASW-200 adds four independently switched 12-volt outputs to a machine that already has some attachment control but not enough of it. It supplements rather than replaces — for the common case where a... -
$2.00 Off
$12.99 List Price:
$14.99📏Replacement 🔌joystick end to controller end 🕹Super Controller 📘 Overview The SG-JS-20 is a replacement replacement cable with a joystick end on one end and a controller end on the other. It is the OEM-match replacement cable for the Super Controller joystick assembly, for... -
$10.00 Off
$63.99 List Price:
$73.99RAM Mount Phone Holder - Skid Steer Genius Maintain clear access to a smartphone without placing it on a console, seat, or other loose surface. The RAM Mount Phone Holder - Skid Steer Genius is a universal in-cab phone mounting solution for skid steers... -
$58.00 Off
$387.99 List Price:
$445.99🔧Rexroth valve 💧Proportional control 🚜Attachment hydraulics 📘 Overview A Rexroth proportional directional solenoid valve for skid steer attachment hydraulic circuits, giving electronically controlled flow direction for precision functions. Unlike a simple on/off solenoid, a proportional valve controls how much flow goes where — which... -
$283.00 Off
$2,825.99 List Price:
$3,108.99Stanley TA54 Hydraulic Tamper (Valve In Handle TA54103) Consistent compaction is essential when preparing trenches, repairing roads, and stabilizing ground around critical infrastructure. The Stanley TA54 Hydraulic Tamper is a purpose-built skid steer attachment designed to deliver controlled hydraulic tamping in areas where larger... -
$67.00 Off
$660.99 List Price:
$727.99260× stronger than the glass it replaces — at half the weight. SHIELDS® Lexan® polycarbonate, formed to the exact shape of your Terex windshield. Drops into the factory opening, reuses your existing hardware, and stays in the frame when something hits it. ✓ Guaranteed... -
$52.00 Off
$514.99 List Price:
$566.99260× stronger than the glass it replaces — at half the weight. SHIELDS® Lexan® polycarbonate, formed to the exact shape of your Gehl windshield. Drops into the factory opening, reuses your existing hardware, and stays in the frame when something hits it. ✓ Guaranteed... -
$3,312.00
🏭Made in USA 📘 Overview A hydraulic tamper for the hole you just set. The EZ Spot UR Hydraulic Hand Tamper (EZ-TAMPER) is a hand-held soil tamper powered by your machine’s hydraulics, used to compact backfill around a pole or post immediately after it... -
$6.00 Off
$35.99 List Price:
$41.99🏭Made in USA 📘 Overview The EZ Spot UR Intermediate Tool Wiring Harness (P-EZ-TWH-102) is the tool-side lead in an EZ Spot UR installation — it runs between the machine harness and the attachment rather than plugging into the machine itself. It integrates with... -
$6.96 Off
$242.99 List Price:
$249.95🏭Made in USA 🔒1-year warranty ⚙Anchors the hand crank 📘 Overview The Landing Gear Leg Lock anchors the landing gear hand crank in place so the gear cannot be wound up. A parked trailer with its landing gear down and the crank locked cannot... -
$2.96 Off
$96.99 List Price:
$99.95🏭Made in USA 🔒1-year warranty 🔩3/8 in plate, 1 in solid shaft 📘 Overview The Ball and Ring Hitch Lock covers and contains the hitch on a parked trailer, so a thief cannot back up, hook on and tow it away. It is a... -
$6.96 Off
$242.99 List Price:
$249.95🏭Made in USA 🔒1-year warranty 🔑Pick and corrosion resistant barrel lock 📘 Overview The Skid Steer Lock clamps both drive control levers at once and locks through the holes in the protective cage, so the operator station is effectively unusable even when the ignition... -
$3.96 Off
$145.99 List Price:
$149.95🏭Made in USA 🔒1-year warranty 📏Adjusts 28 to 33 in 📘 Overview The Wheel to Pedal Lock attaches to the steering wheel in the turned position and secures the brake pedal at the same time, so the vehicle can neither be steered nor stopped...
PICKING THE RIGHT SKID STEER ACCESSORY
Identify Your Priorities
Think about where and how you’ll be using your machine. If winter traction is a concern, snow chains or studs are essential. Want better protection or comfort? Consider cab enclosures or glass panels. Securing your skid steer? Anti-theft locks offer peace of mind.
Match Accessories To Your Machine
Make sure your skid steer accessories fit your model and mounting type. This is especially important for adapter plates, hydraulic systems, or electrical upgrades.
Consider Quality And Durability
Look for mini skid steer accessories that are made from rugged materials and hold up well under jobsite stress and tough conditions.
Evaluate Ease Of Installation And Use
Choose skid steer accessories that install easily and hold up over time. Tools that are simple to use also help minimize downtime and boost field efficiency.
WHAT SETS OUR SKID STEER ACCESSORIES COLLECTION APART?
Built For Tough Conditions
Made with high-grade materials, our skid steer accessories are built to take on rugged terrain, year-round exposure, and long days on the job.
Trusted U.S. Suppliers
We partner with top American brands that manufacture durable skid steer accessories designed for performance and reliability.
Fast Delivery Across The U.S.
With fast order handling, accurate freight quotes, and live tracking, we make it simple to get the skid steer accessories you need, when you need them.
Fair Pricing & Financing
Our skid steer accessories come with competitive pricing and flexible financing options to help you gear up without delay.
NEED HELP CHOOSING THE RIGHT SKID STEER ACCESSORY?
Not sure which skid steer accessories fit your machine or jobsite needs? Our team of experts is here to help: no guesswork, just solid recommendations backed by hands-on experience.
Contact Us →
FAQs
Are Skid Steer Accessories Interchangeable Between Brands?
Many skid steer accessories use standard mount types that work across different brands. Always verify your machine's specs before ordering to ensure the right fit.
Do Accessories Fit Both Standard And Mini Skid Steers?
Some accessories are made for mini skid steers, others for full-size machines. We label each product clearly so you can match them with your equipment confidently.
How Do I Install An Attachment Plate Or Adapter?
Most skid loader accessories are either bolt-on or weld-on. Use standard mechanical tools and follow the included instructions to mount them securely.
Do I Need Snow Chains And Tire Studs Together?
Not always. Chains offer overall traction, while studs add direct grip. Depending on your winter conditions, one or both may be the right choice.
What Maintenance Is Required For Skid Steer Accessories?
Keep skid steer accessories clean and dry. Check for loose parts, apply grease where needed, and store indoors to prevent rust. Regular upkeep keeps them reliable.
CUSTOMER SUPPORT
If you need support, we’re here to help.
Mon-Fri: 8am-4:30pm CT
Sat-Sun: Closed
You can also email us for customer service or product support.
support@eskidsteer.com
Call or Text
To place a new order or for assistance with an existing order call or text us at
+1 (866) 757-8337
Live Chat
Have questions or need help?
Chat with us using the icon in the bottom left.
Start new chat
- Choosing a selection results in a full page refresh.