Description
🔗8 mm alloy
🔒30-day warranty
📦Bungee included
📘 Overview
Quality Chain skid steer snow chains in 2-link spacing put a cross chain across the tread every two side-chain links, the densest ladder pattern Quality Chain builds for a skid steer, so there is almost always steel biting the ground on packed snow, ice and greasy mud. The cross chains are 8 mm (5/16 inch) square link alloy steel, which Quality Chain rates for more traction and longer life than the carbon steel round twist chains sold at the budget end of the category. Fitment is decided by tire size, not by machine brand, and the choice you make on this page is which of three sizes you run: 10x16.5, 12x16.5 or 14x17.5, each covering a group of equivalent metric and flotation sizes listed further down. Every pair ships with the Quality Chain 0216 six-arm spider bungee, the tightener Quality Chain specifies for 12 to 18 inch skid steer rims, so you are not hunting for a tensioner after the chains land. Chains can be shortened link by link during fitting, which is how the same part number covers several tire sizes in one group. Price shown is for a pair, meaning two chains, enough for one axle. Operators shopping snow chains for skid steer work usually end up choosing between cheap carbon steel round twist and alloy steel tire chains like these - Quality Chain rates the alloy square link higher on both traction and wear life.
⚙ What Makes the Quality Chain 2-Link Square Link Chain Different
- 8 mm square link alloy cross chain. These are square link tire chains, not round twist: square links present a flat edge to the ground instead of the rolled profile of a twist link, and Quality Chain publishes the alloy square link as delivering more traction and a longer life than the carbon steel round twist chain in the same fitment.
- 2-Link ladder spacing. A cross chain lands every two links of the side chain. That is the closest cross-chain spacing Quality Chain offers on a skid steer ladder chain, so the tread is covered more of the time and the ride over the chain is smoother.
- Ladder pattern built for industrial equipment. Quality Chain catalogues these skid loader tire chains under skid steer rather than adapting a passenger or light truck chain, so the side chain length and cross chain count are set for skid steer tire sizes rather than car sizing that happens to go around the tire.
- 0216 spider bungee in the box. The blue six-arm spider bungee Quality Chain specifies for 12 to 18 inch forklift and skid steer rims ships with every pair, which is the tightener the fitment chart calls for on all three of these sizes.
- Cut to length during fitting. Quality Chain's mounting procedure has you drive the chain onto the tire, mark the overlap and remove the excess links, so one part number fits a group of tire diameters rather than a single exact size.
- Non-studded. These are plain square link chains with no studs, which matters because the state restrictions Quality Chain flags on paved roads apply to studded chains, not to this line.
🔑 Why Operators Buy the 2-Link Chain
- Traction where the 4-link runs out. Doubling the cross-chain count means roughly twice as many bars in contact through a given wheel rotation, which is the difference between pushing a snow pile and spinning on a compacted lot at 6am.
- Smoother over hard surfaces. With an 8 mm square link cross chain landing every 2 links instead of every 4, the skid steer tire never drops far between bars, so the machine walks over pavement and packed lots with less of the thumping that 4-link spacing produces.
- Alloy outlasts the cheap option. Quality Chain positions alloy square link above carbon steel round twist for wear life, so on a machine that runs chains all season the replacement interval moves out rather than the purchase price being the whole story.
- No separate tensioner purchase. The 0216 bungee that Quality Chain's own fitment chart specifies for these three tire sizes is already in the box, so the chain can be tensioned properly the day it arrives rather than run loose while a tightener is on order.
- One part number covers a size group. Because the chain is cut to fit, the 12x16.5 part also covers 31x13-16.5, 33/12-20, 305/70-16.5 and ten more equivalents, so a mixed fleet on similar sized rubber can standardise on one chain.
📊 Quality Chain 2-Link Skid Steer Chain Specifications
| Specification | Value |
|---|---|
| Chain style | Square link ladder |
| Cross chain material | Alloy steel |
| Cross chain size | 8 mm (5/16 inch) |
| Cross chain spacing | Every 2 links of the side chain |
| Trade size | 7/0 |
| Gauge size | .312 |
| Studs | None - non-studded |
| SAE Class S | No |
| Sold as | Pair (two chains, one axle) |
| Tightener included | Quality Chain 0216 six-arm spider bungee (blue, 12 to 18 inch rims) |
| Maximum operating speed | 30 MPH |
| Manufacturer | Quality Chain Corp |
🔄 2-Link Chain Part Numbers by Tire Size
| Tire size option | Quality Chain part | Cross chain part | Znet |
|---|---|---|---|
| 10x16.5 | 1501HDSL-2 | 6263SL | 811149 |
| 12x16.5 | 1502HDSL-2 | 6268SL | 279298 |
| 14x17.5 | 1503HDSL-2 | 6268SL | 811156 |
The part number you receive is set by the tire size selected above. Every option in this listing ships as a pair with the 0216 spider bungee.
📋 Choosing Your 2-Link Chain Size
There is one choice on this listing, and it is tire size. All three options use the same 8 mm square link alloy cross chain and the same 2-link spacing, so nothing about traction or construction changes between them:
- 10 x 16.5 - the smallest of the three, covering 10x16.5, 31x5x9, 31x6x10, 31/10-20, 260/70-16.5, 10/75-15.5, 10-16.5 and 265/70-16.5.
- 12 x 16.5 - the most common skid steer size, and the 12x16.5 skid steer tire chains carry the widest fitment group here, covering carry the widest fitment group here, covering 12x16.5, 12-16.5, 31x13-16.5, 31x15.5-15, 31x12.50-16.5, 33x6x10, 33x6x11, 33/12-20, 36x13.5-15, 305/70-16.5, 300/75-15, 315/55-20, 12.5/70-16, 33x12.50-16.5 and 320/65-16.5. If your sidewall reads 12-16.5 rather than 12x16.5, this is still the right part - 12-16.5 skid steer tire chains are the same fitment group.
- 14 x 17.5 - the largest option, covering 14x17.5, 33x7x11, 33x15.5-16.5, 36/14-20, 12.0-18 and 355/70-17.5.
🚜 Will These Skid Steer Snow Chains Fit My Machine?
Quality Chain builds these as tire chains for skid steer loaders rather than adapting a car chain that happens to go round the rubber, and fitment is decided by tire size, not by a quick attach plate, a coupler or a machine brand. Chains for skid steer tires are sized off the sidewall: read the size printed on your tire, match it in the table below, and the chain fits regardless of whether the loader is a Bobcat, a Caterpillar, a John Deere, a Case, a New Holland, a Takeuchi, a Kubota or a Gehl. Quality Chain publishes no machine model list for this line because it does not need one.
| Option you select | Quality Chain part | Tire sizes this part covers |
|---|---|---|
| 10x16.5 | 1501HDSL-2 | 10x16.5, 31x5x9, 31x6x10, 31/10-20, 260/70-16.5, 10/75-15.5, 10-16.5, 265/70-16.5 |
| 12x16.5 | 1502HDSL-2 | 12x16.5, 12-16.5, 31x13-16.5, 31x15.5-15, 31x12.50-16.5, 33x6x10, 33x6x11, 33/12-20, 36x13.5-15, 305/70-16.5, 300/75-15, 315/55-20, 12.5/70-16, 33x12.50-16.5, 320/65-16.5 |
| 14x17.5 | 1503HDSL-2 | 14x17.5, 33x7x11, 33x15.5-16.5, 36/14-20, 12.0-18, 355/70-17.5 |
Three things decide fitment beyond the size itself. These chains mount on tires, so they do not fit a compact track loader or any machine running rubber tracks. The chain needs room to hang over the sidewall and swing without striking hoses, sensors or the loader arm, which Quality Chain asks you to check by pre-fitting before the first job. And because tires vary with age, brand, tread and wear, the chain is designed to be shortened during mounting rather than to arrive at an exact length.
Everything needed to confirm fitment is on this page - read your tire sidewall, match it in the table above and add the chains to your cart to see delivered pricing for your address. If your size is not in the table, email support@eskidsteer.com or message us on chat with the sidewall marking.
Inspect before you sign. Chains ship as a heavy palletised or boxed freight item. Note any damage to the packaging on the Bill of Lading before the driver leaves - a signed clean delivery receipt makes a carrier claim far harder to win. Photograph anything questionable and email support@eskidsteer.com.
❓ 2-Link Skid Steer Chain Questions, Answered
How do I know which tire size to order?
Read the size printed on the sidewall of your skid steer tire and match it against the fitment table on this page. Quality Chain groups the 2-link skid steer chain into three parts - 1501HDSL-2 for the 10x16.5 group, 1502HDSL-2 for the 12x16.5 group and 1503HDSL-2 for the 14x17.5 group - and each part covers a list of equivalent metric and flotation sizes, so an exact string match on the sidewall is not required as long as your size appears in one of the groups.
Do I get one chain or two?
The price on this listing is for a pair, which is two Quality Chain 2-link chains. That covers one axle of a skid steer. Operators who want all four wheels chained order two pairs.
What is the difference between 2-link and 4-link spacing?
The number describes how often a cross chain crosses the tread: 2-link spacing puts one across every two links of the side chain, 4-link puts one across every four. Quality Chain states that the 2-link pattern offers better coverage and increased traction. The trade-off is cost and rolling weight, both of which are lower on the 4-link version of these chains. Everything else - the 8 mm square link alloy cross chain, the three tire size options, the included 0216 bungee - is identical between the two.
Is 2-link spacing worth it over 4-link for snow removal?
For commercial snow work on packed lots and ice, the 2-link Quality Chain chain is the one to buy: twice the cross chains means steel is in contact more of the time and the machine rides over the chain more smoothly instead of dropping between widely spaced bars. For occasional winter use, mud, or a lighter machine where added rolling weight matters, the 4-link pattern is usually the better value.
Why square link alloy instead of a cheaper round twist chain?
A square link presents a flat edge to the ground where a twist link presents a rolled surface, and Quality Chain publishes its alloy square link as providing more traction and a longer life than the carbon steel round twist chain covering the same tire sizes. On a machine that runs chains all season the difference shows up as a longer replacement interval, not just better grip on day one.
Is a tightener included, or do I need to buy one separately?
The Quality Chain 0216 spider bungee is included with every pair on this listing. It is the blue six-arm bungee Quality Chain specifies for 12 to 18 inch forklift and skid steer rims, and it is the tightener Quality Chain's own fitment chart calls for on all three of these 2-link chain sizes. Quality Chain asks that eye protection be worn whenever a rubber bungee or tightener is installed.
How are these chains installed on a skid steer?
Quality Chain's mounting procedure for its straight link chains is to lay the chain out behind the tire, attach a rope to both side chains next to the fasteners, pass the rope over the tire between the lugs and drive the machine forward so the chain is pulled up onto the tire. If the ends overlap, mark the links, take the chain off, cut out the excess and repeat. Hook the inside fastener as tight as it will close, then the outside fastener, then fit the 0216 bungee to take up the remaining slack.
Can these chains be shortened to fit my tires?
Yes, and Quality Chain expects it. The mounting instructions include marking and removing excess links when the chain ends overlap on the tire, which is how one part number covers a group of tire sizes that vary by brand, tread and wear. Cut the chain down before the first working shift rather than running it loose.
How fast can I drive with these chains fitted?
Quality Chain's limit is 30 MPH. Travelling faster increases the chance of component failure, and speeds over 30 MPH void the warranty along with improper fit and improper installation. If a chain breaks, stop and remove it immediately rather than finishing the pass.
What warranty comes with Quality Chain tire chains?
Quality Chain warrants its chains free from defects in workmanship and material for 30 days from the date of delivery. That warranty is void if the chains are run above 30 MPH, fitted improperly or installed improperly. Quality Chain also states it will not warranty alloy wheels or wheel covers damaged by chains or chain tighteners, which is why pre-fitting and checking clearance matters before the first job.
Are tire chains legal to use where I work?
Quality Chain states that tire chains are legal in all 50 states and are required in certain areas. Some states restrict studded chains on paved roads - that restriction does not apply to these chains, which are plain square link with no studs. Chain requirements vary by state, so check your state Department of Transportation guidance for road use.
Will these fit a compact track loader?
No. These are tire chains and they mount on a pneumatic tire. A compact track loader running rubber tracks needs a track-specific product, not a tire chain. If your machine is a wheeled skid steer, read the size off the tire sidewall and match it in the fitment table on this page.
Will the extra chain weight hurt my machine or my lot surface?
The 2-link pattern adds more rolling mass per tire than the 4-link, which is a real consideration on smaller machines and on repeated fit-and-remove cycles. On surfaces, Quality Chain notes that traction devices can cause cosmetic scuffing on the tire, and any ladder chain will mark bare concrete. Fit the chain properly tensioned with the included bungee - a loose chain is what damages surfaces, tires and the chain itself.
How much is shipping and when is it calculated?
Shipping is calculated at checkout. Add the chains to your cart, enter your delivery address, and the shipping charge is displayed before you complete the order. Lift gate service is available for residential deliveries and can be selected at checkout.
📥 Quality Chain 2-Link Chain Documents
- Straight link chain mounting instructions (PDF) - Quality Chain's eleven step fitting and cut-to-length procedure.
- Quality Chain safety, warning and warranty card (PDF) - speed limit, clearance checks and the full warranty terms.
Also on eskidsteer.com: the 4-link version of these chains, and the rest of our snow chains and Quality Chain range.
Shipping
The following are estimated processing and delivery times. We make every effort to fulfill orders as quickly as possible.
We only deliver within the United States. If a package can’t be delivered due to an error entering your shipping address, Eskidsteer is not responsible for any additional fees that may incur to reroute or reship the package.
By placing an order through this Website you will be agreeing to the terms below. These are provided to ensure both parties are aware of and agree upon this arrangement to mutually protect and set expectations for our service. Please read our Terms of Service.
How do I place an order?
We do not take orders on the phone for security reasons. To place an order, go to a product page, select the desired quantity of the item, and add it to your cart via the “Add to Cart” button. During checkout, you just need to enter or confirm your shipping address and credit card information, then you can place your order
Shipping fee:
Delivery Time= Handling time +Transit Time:
Handling time: 3-3 Days
Transit time: 5-8Days
Order cut off Time: 5:00 PM (GMT-05:00) Eastern Standard Time (New York)
Which shipping carriers do you use to ship?
All Shipments are done with LTL Carriers, UPS, FedEx, DHL, and USPS
Failure to Accept Products on Delivery
If you reject delivery of goods ordered from us, or otherwise fail to accept delivery of the goods, you agree to pay for all related and additional shipping fees, duties, taxes, restocking fees and other charges arising from such failure to accept delivery. After such failure to accept delivery of the goods, it shall be your responsibility to pay for and arrange a new shipping date.
Tracking Information:
We also provide tracking numbers for all orders. Once your order has been shipped, we will provide you with a tracking number that you can use to track the progress of your package. You will receive this tracking number via email.
We understand the importance of knowing the status of your order, and we strive to provide you with transparent and reliable tracking information. If you have any questions or need assistance with tracking your order, please don’t hesitate to contact our customer support team. We’re here to help!.
Can I ship to multiple addresses?
At this time, we cannot ship to multiple addresses in one order. Please place separate orders on support@eSkidsteer.com to ship to different addresses. If you need assistance, please contact our Customer Service.
Wrong Address:
Please review and ensure that you have entered the correct address. We are not responsible for non-delivery due to errors in the address that you provide. If an order is returned due to an incorrect address, we will refund the original order (excluding the shipping fee) and ask that you re-submit your order.
Change of Address:
If your item hasn’t yet been shipped, you may change your delivery address by emailing at support@eSkidsteer.com. Please note that we are not obligated to ensure changes to the delivery address after the item has been delivered.
If you have any questions or require further assistance regarding the shipping policy, please do not hesitate to contact our customer support team.
Phone: +1 8667578337
Email: support@eSkidsteer.com
Address: 30 North Gould St Suite R, Sheridan, WY 82801, USA
Returns
Returns
We offer returns and exchanges in limited circumstances as follows:
- In order to submit a return, you must contact us by email at support@eSkidsteer.com for us to confirm the items ordered are eligible for return or exchange;
- To be eligible for a return, you must commence the return process within 30 days of your item being delivered to you and:
- it must be unused, for example, once an item is hooked up to an attachment plate, hydraulic lines or electrical connection, it will not be eligible for return. Likewise, if your item shows any sign of use, which we may determine in our sole and absolute discretion, we will not accept the return;
- it must be in the same condition you received it in. You will be required to send us timestamped photos of the condition of your items as a condition to determine your eligibility for the return or exchange; and
- it must be returned in the same packaging or containers as it was received in.
We do not accept returns for products that were listed as final sale items at the time of purchase.
You agree to pay a 25% restocking fee on all returns, which we will deduct from any refund owing to you.
After the above referenced 30-day period, unfortunately we cannot offer you a refund or exchange, under any circumstances.
If your return or exchange is approved, we will provide instructions on shipping your items back to us or the applicable supplier via email.
You agree that you shall be responsible for all return shipping costs and related expenses.
Our shipping cost to you is not refundable.
You are also responsible for ensuring the items are carefully packaged for shipment and that risk of loss or damage during return shipping shall be your sole liability. You may wish to obtain insurance while the returned items are in transit.
Lost or Damaged
If the item is damaged when you receive it, do not sign the proof of delivery, and contact us immediately at support@eSkidsteer.com. If you sign the proof of delivery form, you cannot later claim the item was lost (i.e. not delivered) or damaged on arrival.
If the item is damaged on arrival take photos of the damage with a time stamp.
In the event the item is lost or damaged on arrival, we will assist you with filing a reimbursement claim directly with the applicable supplier or shipping company as applicable. However, you agree that as we are not the direct supplier of the items, it shall be your responsibility to pursue any claims with the applicable supplier in the event your lost or damaged item is not replaced by the supplier or carrier.
No Warranties Offered by Us
Everything on the Website, including all products available for order, are provided "as is" without warranty of any kind from us, including all implied warranties and conditions of merchantability and fitness for a particular purpose. We hereby disclaim all warranties and conditions of any kind, whether express, implied or statutory.
You acknowledge that we do not manufacture the products made for sale on the Website and that such products and the individual components thereof, are made by third party manufacturers.
Warranties Offered by Third Parties
Our third party suppliers and manufacturers may offer limited warranties on certain products sold on the Website. You may contact us and we can refer you to the applicable supplier or manufacturer if you wish to inquire about the details of any such warranties offered by those third parties. You agree that we shall not be liable or responsible for any warranties granted by such third parties.
To the extent products you order from us have warranties provided by a third party supplier or manufacturer, upon your request we agree to reasonably assist with the submission of warranty claims to such third parties. However, we make no guarantees that any warranty claims will be successful. You agree it is your responsibility to ensure warranty claims are submitted within the applicable timeframe to the applicable supplier or manufacturer.
- Choosing a selection results in a full page refresh.