Couldn't load pickup availability
Smart Y Adapter for Grader and Laser Control Integration: This Y adapter allows you to add laser or GPS control systems while maintaining your existing grader controls—without cutting, splicing, or modifying your machine’s wiring.
True Plug-and-Play Installation: Simply connect the adapter inline between your existing harness and solenoid. No permanent modifications are required, making installation quick and reversible.
Supports Multi-Function Grader Operation: For standard grader setups (left up/down and right up/down), four adapters are required to fully control all hydraulic movements.
Built-In Protection and Reliability: Every leg of the adapter includes a diode to prevent backfeeding when switching between manual and external control systems. This ensures safe and reliable operation in both modes.
Flexible Compatibility Options: Available for multiple connector types including Deutsch 2-pin, Delphi Metri-Pack 2-pin, and DIN 4-pin. External control inputs typically connect through Deutsch 2-pin interfaces, with options to adapt or wire as needed.
How It Works: Disconnect your solenoid connection, install the Y adapter inline, and reconnect your harness. Repeat for each function. You’ll now have accessible connection points to integrate external control systems while maintaining full manual operation.
This adapter allows you to connect additional control systems, such as laser or GPS grading controls, without modifying your machine or attachment wiring.
It features a built-in LED indicator that provides real-time feedback, allowing you to quickly confirm whether signals are reaching your solenoids.
For standard grader functions (left up/down and right up/down), you will typically need four Y adapters.
No, this is a plug-and-play solution that installs inline without any permanent modifications.
The system supports Deutsch 2-pin, Delphi Metri-Pack 2-pin, and DIN 4-pin connections, depending on your setup.
Disconnect the solenoid connection, insert the Y adapter inline, and reconnect the harness. Repeat this process for each control circuit.
Yes, the adapter provides Deutsch 2-pin receptacles for connecting external control systems like laser or GPS controllers.
The built-in diode prevents backfeeding, ensuring that external controls do not interfere with manual operation.
Yes, the LED indicator makes it easy to identify whether signals are reaching the solenoids, helping diagnose issues quickly.
It is compatible with systems using supported connector types, but you should verify compatibility with your specific machine and attachment setup.
Thanks for subscribing!
This email has been registered!
