Couldn't load pickup availability
2010 - 2018 Kubota Machine Side Harness SVL75/90/95 Only - 2 Controls, 1 x 12V Keyed and 1 x Ground Only. This is now a universal kit with both brackets due to so many people not reading the information provided and ordering the wrong kit. DOESN’T WORK ON SSV
Does not work on machines 2018 and newer. You can tell because there are more than three buttons on the left stick.
This kit includes:
This is the harness that started it all for us and Kubota. Shortly after the SVL machines were introduced, customers started calling us looking for the mate for this to run their Bobcat Snow Blowers. We quickly realized that Kubota had only installed 2 buttons in their sticks so they could only run two functions.
Since then many customers have called us and stated that they only care about two controls so all they want is the plain old 2 output harness that Kubota supplies. Their complaint was that they are charging $500 for a harness that looks similar to something we charge a lot less for.
We use our top quality outdoor rated cable along with original Deutsch connectors and proper industry standard strain relief dust caps. This kit installs the same as the OEM Kubota harness while costing less than half the price.
This kit will ship with the Japanese style connector to plug in directly under your machine and run out to your boom.
Please watch the video below if you would like to add up to 4 additional controls to this harness.
#177 - Add 4 Controls to Kubota SVL 75/90/95
This harness is designed for Kubota SVL75 / SVL90 / SVL95 machines from model years 2010–2018.
No. This harness does not work on SSV machines.
No. It does not work on machines from 2018 and newer.
If your left stick has more than three buttons, your machine is 2018+ and this harness will not fit/work.
It provides 2 control outputs, plus 1 keyed 12V and 1 ground.
The kit includes the connection harness (SG-KB-01) and dual mounting brackets intended to cover Kubota SVL75/90/95 variations.
It’s now a universal kit that ships with both brackets to reduce incorrect orders and support the SVL75/90/95 models more reliably.
It uses the Japanese-style machine connector and is intended to plug in under the machine, then route out toward the boom.
Yes. It installs essentially the same as the OEM-style harness, with some parts designed to be easier to secure using tie wraps.
Thanks for subscribing!
This email has been registered!
