Couldn't load pickup availability
This allows you to use your Cat Dozer Blade on any machine with 14 pin connections.
Use this adapter to plug directly into your Caterpillar dozer solenoids and then directly into our 14 connectors to operate on a Bobcat, Kubota, New Holland, John Deere, Mustang, Takeuchi and even Cat D-Series 14 Pin. This kit is necessary because Cat uses two opposing solenoids that need to trigger at the same time. By installing this adapter you are tying the trigger points together and allowing just one plug to go to our controller so you will only need to push one button to make it actuate.
The dozer will work by angling side to side without any electronics. Just hook up your hoses. To make the blade tip, you need to trigger the solenoid to move your flow to the secondary cylinders. You will still need to turn on your pump by moving your right joystick toggle from side to side.
Both ends of this product are built to factory pin specifications with original factory parts. We cannot guarantee that your machine was ordered with all of the factory controls, nor can we guarantee that your attachment is pinned accordingly as well. This is especially evident with auction attachments or second hand items bought on the internet. We include tools and instructions on moving pins to make everything align.
It can be used on machines with 14-pin connections, including Bobcat, Kubota, New Holland, John Deere, Mustang, Takeuchi, and compatible Caterpillar machines.
No. This adapter provides the electrical interface only and does not include any control hardware.
Not always. Machine and attachment configurations can vary, and pin assignments may differ depending on how the equipment was originally ordered.
This adapter allows a Caterpillar dozer blade to be operated on machines equipped with a standard 14-pin attachment connector.
Caterpillar dozer blades use two opposing solenoids that must activate at the same time. This adapter ties those trigger points together so the blade can be operated with a single control input.
Yes. Side-to-side angling works hydraulically by connecting the hoses directly, without requiring electronic control.
Electrical activation is required to tip the blade by diverting hydraulic flow to the secondary cylinders.
The blade tip is activated by triggering the solenoid while the hydraulic pump is engaged.
Yes. By combining the solenoid triggers, the blade can be operated using a single button instead of two.
Thanks for subscribing!
This email has been registered!
