Description
Description
Bobcat® and other manufacturers didn’t make it easy: some Fecon mulchers (sold through Bobcat®) and certain Bobcat® cement mixers were built with extra CAN electronics and a hydraulic control block that aren’t actually needed for basic operation—effectively limiting the attachment to specific machines.
This kit is the straightforward workaround. It bypasses that unnecessary electronic/hydraulic “gate” so you can run the attachment as it was originally intended to work, without relying on the factory harness in situations where it isn’t required.
Why this ships as a 3-piece kit:
There are a few variations in the valve setup—some use a cartridge, while others use one of two plug sizes. To keep it simple (and cost-effective), you’ll start with the cartridge option. If your valve doesn’t match, you’ll use the included plugs instead. One of the three solutions will fit—guaranteed.
What you’ll do (overview):
- Locate the single solenoid near where the main hydraulic hoses enter the control block.
- Remove the coil, then remove the solenoid cartridge from the block.
- Compare what you removed to the kit components to confirm the correct match.
- Install the cavity plug to cap the chamber and allow hydraulic flow to bypass—so the attachment can operate without the electronic harness.
This is especially useful on machines (like many John Deere models) that don’t provide a switched “K” power pin for attachment electronics. In many cases, you can also remove the electronic harness entirely after the bypass is installed.
Help us keep cracking these “locked” attachments:
If you’re willing, send us the removed controllers. We use them for testing so we can build more solutions that help operators run their attachments across brands. As a thank-you, we’ll send you $75 when your controller is received.
Below is the Fecon mulching head control block example, showing the cartridge removed and the cavity plug solution.
Compatibility notes:
- Mulcher: This bypass approach applies to mulchers that do not have a hood. If your mulcher has a hood, you’ll still need the harness to control hood open/close.
- Cement Mixer: This bypass allows the mixer to operate, but the factory RACs remote/start functions will not be supported.
Once installed, you can run your Bobcat mulcher on Caterpillar, John Deere, Kubota, Case, Gehl, Mustang, Volvo, and many other skid steer or compact track loader brands. Many customers also choose this kit simply to eliminate constant cable damage and replacement costs.
Videos
Shipping
The following are estimated processing and delivery times. We make every effort to fulfill orders as quickly as possible.
We only deliver within the United States. If a package can’t be delivered due to an error entering your shipping address, Eskidsteer is not responsible for any additional fees that may incur to reroute or reship the package.
By placing an order through this Website you will be agreeing to the terms below. These are provided to ensure both parties are aware of and agree upon this arrangement to mutually protect and set expectations for our service. Please read our Terms of Service.
How do I place an order?
We do not take orders on the phone for security reasons. To place an order, go to a product page, select the desired quantity of the item, and add it to your cart via the “Add to Cart” button. During checkout, you just need to enter or confirm your shipping address and credit card information, then you can place your order
Shipping fee:
We offer Free Shipping for most items.
*Free shipping is not applicable to parts orders.
Delivery Time= Handling time +Transit Time:
Handling time: 3-3 Days
Transit time: 5-8Days
Order cut off Time: 5:00 PM (GMT-05:00) Eastern Standard Time (New York)
Which shipping carriers do you use to ship?
All Shipments are done with LTL Carriers,UPS, FedEx, DHL, and USPS
Failure to Accept Products on Delivery
If you reject delivery of goods ordered from us, or otherwise fail to accept delivery of the goods, you agree to pay for all related and additional shipping fees, duties, taxes, restocking fees and other charges arising from such failure to accept delivery. After such failure to accept delivery of the goods, it shall be your responsibility to pay for and arrange a new shipping date.
Tracking Information:
We also provide tracking numbers for all orders. Once your order has been shipped, we will provide you with a tracking number that you can use to track the progress of your package. You will receive this tracking number via email.
We understand the importance of knowing the status of your order, and we strive to provide you with transparent and reliable tracking information. If you have any questions or need assistance with tracking your order, please don’t hesitate to contact our customer support team. We’re here to help!.
Can I ship to multiple addresses?
At this time, we cannot ship to multiple addresses in one order. Please place separate orders on support@eSkidsteer.com to ship to different addresses. If you need assistance, please contact our Customer Service.
Wrong Address:
Please review and ensure that you have entered the correct address. We are not responsible for non-delivery due to errors in the address that you provide. If an order is returned due to an incorrect address, we will refund the original order (excluding the shipping fee) and ask that you re-submit your order.
Change of Address:
If your item hasn’t yet been shipped, you may change your delivery address by emailing at support@eSkidsteer.com. Please note that we are not obligated to ensure changes to the delivery address after the item has been delivered.
If you have any questions or require further assistance regarding the shipping policy, please do not hesitate to contact our customer support team.
Phone: +1 8667578337
Email: support@eSkidsteer.com
Address: 30 North Gould St Suite R, Sheridan, WY 82801, USA
Returns
Returns
We offer returns and exchanges in limited circumstances as follows:
- In order to submit a return, you must contact us by email at support@eSkidsteer.com for us to confirm the items ordered are eligible for return or exchange;
- To be eligible for a return, you must commence the return process within 30 days of your item being delivered to you and:
- it must be unused, for example, once an item is hooked up to an attachment plate, hydraulic lines or electrical connection, it will not be eligible for return. Likewise, if your item shows any sign of use, which we may determine in our sole and absolute discretion, we will not accept the return;
- it must be in the same condition you received it in. You will be required to send us timestamped photos of the condition of your items as a condition to determine your eligibility for the return or exchange; and
- it must be returned in the same packaging or containers as it was received in.
We do not accept returns for products that were listed as final sale items at the time of purchase.
You agree to pay a 25% restocking fee on all returns, which we will deduct from any refund owing to you.
After the above referenced 30-day period, unfortunately we cannot offer you a refund or exchange, under any circumstances.
If your return or exchange is approved, we will provide instructions on shipping your items back to us or the applicable supplier via email.
You agree that you shall be responsible for all return shipping costs and related expenses.
Our shipping cost to you is not refundable.
You are also responsible for ensuring the items are carefully packaged for shipment and that risk of loss or damage during return shipping shall be your sole liability. You may wish to obtain insurance while the returned items are in transit.
Lost or Damaged
If the item is damaged when you receive it, do not sign the proof of delivery, and contact us immediately at support@eSkidsteer.com. If you sign the proof of delivery form, you cannot later claim the item was lost (i.e. not delivered) or damaged on arrival.
If the item is damaged on arrival take photos of the damage with a time stamp.
In the event the item is lost or damaged on arrival, we will assist you with filing a reimbursement claim directly with the applicable supplier or shipping company as applicable. However, you agree that as we are not the direct supplier of the items, it shall be your responsibility to pursue any claims with the applicable supplier in the event your lost or damaged item is not replaced by the supplier or carrier.
No Warranties Offered by Us
Everything on the Website, including all products available for order, are provided "as is" without warranty of any kind from us, including all implied warranties and conditions of merchantability and fitness for a particular purpose. We hereby disclaim all warranties and conditions of any kind, whether express, implied or statutory.
You acknowledge that we do not manufacture the products made for sale on the Website and that such products and the individual components thereof, are made by third party manufacturers.
Warranties Offered by Third Parties
Our third party suppliers and manufacturers may offer limited warranties on certain products sold on the Website. You may contact us and we can refer you to the applicable supplier or manufacturer if you wish to inquire about the details of any such warranties offered by those third parties. You agree that we shall not be liable or responsible for any warranties granted by such third parties.
To the extent products you order from us have warranties provided by a third party supplier or manufacturer, upon your request we agree to reasonably assist with the submission of warranty claims to such third parties. However, we make no guarantees that any warranty claims will be successful. You agree it is your responsibility to ensure warranty claims are submitted within the applicable timeframe to the applicable supplier or manufacturer.
- Choosing a selection results in a full page refresh.