Couldn't load pickup availability
18" Jumper Cable (CB-2000X Only)
This 18-inch jumper cable is designed specifically for use with the CB-2000X Genius Controller. It features a 4-pin Deutsch plug on one end and bare, stripped wires on the other—so you can splice it into virtually any attachment setup.
One end plugs directly into your Genius Controller. The other end is meant to be spliced into your attachment harness. You’ll need to have a harness in place (or build one) to complete the connection.
Important: Use one cable with the CB-2000X only.
Disclaimer:
This is not a Bobcat® product and is not endorsed by Bobcat®. We are not attempting to represent this as a Bobcat® product. This product is optically isolated from the controls of your machine and is designed so it cannot damage your machine or controls. It is safe to use and will not damage a thing. If a dealer claims this will void your warranty or damage your machine, please call us and report it. Skid Steer Genius is a specialty controls company—our goal is to make what you buy work across machines, not lock you into one brand.
Bobcat®, the Bobcat logo, and the colors of the Bobcat machine are registered trademarks of Bobcat Company in the United States and various other countries. Bobcat Company is a subsidiary of Doosan Infracore Bobcat Holdings Co., Ltd., a wholly owned subsidiary of Doosan Infracore Co., Ltd.
All rights reserved.
This 18" jumper cable is designed to connect your Genius Controller to an attachment when you need bare, stripped wire leads for splicing. One end plugs into the controller, and the other end provides stripped wires so you can tie into your attachment’s wiring.
This cable is for the CB-2000X only. It uses a 4-pin Deutsch plug on the controller side that matches the CB-2000X connection.
One end has a 4-pin Deutsch plug that connects to your controller. The other end has bare stripped wire leads so you can splice into your attachment harness.
No. You will need an attachment-side harness in place. This jumper is meant to splice into an existing harness/wiring setup on the attachment.
No. This is a splice-in jumper cable. Installation requires wiring work (splicing) to connect the bare leads into the attachment’s wiring.
It can be used with many attachment setups because the output end is stripped wires—so it’s flexible. The key requirement is that your attachment has (or can be built with) the correct harness/wiring to splice into.
Yes—when used as intended with the Genius Controller. The controller/cable setup is designed to be optically isolated from the machine controls, helping prevent damage to the machine or its control system.
This product is designed to be safe for use and not damage machine controls. If a dealer claims it will void your warranty or harm your machine, you can contact support to discuss your specific setup.
No. This is not a Bobcat® product and is not endorsed by Bobcat®. Bobcat® and related trademarks belong to their respective owners.
Thanks for subscribing!
This email has been registered!
