Skid Steer Slide Shift Auger Mounting Bracket - Digga

📘 Overview

The Digga Slide Shift Auger Mounting Bracket (FR-001247) enables offset drilling with your skid steer auger drive — allowing the drive head to slide laterally so you can drill holes right next to fences, walls, foundations, and other structures that would otherwise be impossible to approach with a fixed-center mount. Weighs 150 lbs. Available in four variants: Multifit HD (standard SSQA skid steers), Bobcat MT, ASV/Terex PT30/RC30, and Euro Hitch. Requires a separate Slide Shift Cradle (sold separately) for full operation. Made in Dyersville, Iowa, USA.

⚙️ Key Features

• FR-001247 — slide shift auger mounting bracket for offset drilling near structures
• Slide cradle allows lateral offset of drive head — drill right next to walls, fences, and foundations
• 150 lbs
• Four variants: Multifit HD (SSQA) | Bobcat MT | ASV/Terex PT30/RC30 | Euro Hitch
• Requires Slide Shift Cradle for full operation (sold separately)
• Made in Dyersville, Iowa, USA | Digga — attachments since 1981

🔑 Benefits

• Slide shift capability solves the most common constraint in fence and foundation drilling — the centerline of a skid steer auger drive is fixed at the machine's attachment centerline. When drilling near an existing fence, the machine cannot get close enough for the bit to reach the target location. The slide shift bracket lets the operator offset the drive head 6-12" laterally, reaching locations impossible with a fixed mount.
• One bracket replaces expensive equipment rental or hand-digging for close-to-structure holes — contractors who encounter close-structure drilling occasionally rent track-mounted equipment or hand-dig rather than buy offset equipment. The FR-001247 solves this at a fraction of the rental cost across multiple jobs.
• Compatible with the Digga auger drive package ecosystem — uses the same SSQA interface as all Digga mounting hardware, compatible with the full DSS and DDS drive range.
• Four machine variants provide correct interface without adapters

📊 Specifications

🔗 Attachment Compatibility

Select variant for your machine quick attach interface. SSQA (Universal) = Multifit HD. Requires separate Slide Shift Cradle (HI-000353 or HI-000408 — see Skid Steer Slide Shift Cradle listing on eskidsteer.com) for full sliding operation. Drive unit sold separately.

🚜 Machine Compatibility

Compatible with skid steer loaders and compact track loaders with a Universal Quick Attach (SSQA):

Select correct variant for your machine interface. Requires Slide Shift Cradle for full operation.

❓ FAQs