Hydraulic coupling
¾" flush-face coupling
Construction
Grade 50 steel
Rated burst pressure
15 ksi (103.4 MPa)
Guaranteed Fit
Fast Shipping
Hassle-Free Returns
Description
🏭Made in USA
📘 Overview
The EZ Spot UR Rock & Pole Claw (EZ-0006) is a skid steer rock grapple that closes hard on rock, broken concrete, poles and pipe — the loads that roll out of a bucket and are too heavy or too irregular to sling by hand. Rated to lift 1,000 lb on its own, the Rock & Pole Claw mounts on a 2.94" square shaft through a 3" square receiver and swaps between EZ Spot UR bases by pulling a single 3/4" pin. Two choices decide what you order. First the base: no base at all if you already run one, a Fixed Non-Rotating Base, or a Double Cylinder Rotating Base that swings the tool head through 127 degrees to the operator’s left. Second the boom — none, 4, 6 or 8 feet — and this is the choice that changes what the Rock & Pole Claw can pick up, because reach is bought with capacity: 1,000 lb with no boom down to 500 lb at full 8-foot extension. It runs on 20–30 GPM at 3,000 psi through ¾" flush-face couplings.
⚙ Key Features of the Rock & Pole Claw
- Reach into the hole instead of over it — 4, 6 and 8 foot booms put the jaw down into a trench or footing where the machine itself cannot get close enough.
- 127 degrees of rotation on the Double Cylinder Rotating Base, driven by two 2.5" bore cylinders developing 14,726 lb of push each.
- Single-pin tool changes — the 3/4" pin through the 2.94" shaft releases the tool head, so one base serves every EZ Spot UR attachment with a 3" square receiver.
- Longer 6" stroke clamp cylinder closes further than the Utility Claw, which is what lets it hold round stock such as pole and pipe securely.
- Grade 50 steel, core welded throughout the base and tool head.
- Ships ready to run with hoses, flush-faced couplers, a spring hose mount and a wiring harness.
- Adaptable beyond skid steers — excavators, wheel loaders, telehandlers and backhoes with a specialty bolt-on mount.
🔑 Why Operators Choose the Rock & Pole Claw
- Replaces the man on the ground — the Rock & Pole Claw is a one-operator tool, so lifting broken concrete out of a trench no longer needs a second person in the drop zone.
- Reach is priced honestly — the published capacity chart means you size the boom to the load before you buy, instead of discovering the limit on site.
- One base, many tools — if you already own an EZ Spot UR base, order the Rock & Pole Claw without one and keep the 3/4" pin doing the work.
- 9,425 lb of clamp force from a single 6"-stroke cylinder holds irregular loads that a bucket cannot.
- Low hydraulic demand — 20–30 GPM suits a standard-flow skid steer; no high-flow machine required.
📊 Rock & Pole Claw Specifications
| Specification | Value |
|---|---|
| Hydraulic flow required | 20–30 GPM at 3,000 psi |
| Hydraulic coupling | ¾" flush-face coupling |
| Rated burst pressure | 15 ksi (103.4 MPa) |
| Pressure drop | 262 psi (1.81 MPa) |
| Return pressure at 3,000 psi / 20 GPM | 2,738 psi (18.88 MPa) |
| Rotation cylinders | 2 × 2.5" bore, 1.25" rod, 12.5" stroke |
| Rotation cylinder force | 14,726 lb push / 11,045 lb pull |
| Clamp cylinder | 1 × 2" bore, 1.25" rod, 6" stroke |
| Clamp cylinder force | 9,425 lb push / 5,743 lb pull |
| Rotation range | 127° to the operator’s left (Double Cylinder Rotating Base) |
| Mounting method | Universal Quick Attach (customisable) |
| Shaft interface | 2.94" square shaft into a 3" square receiver, 3/4" pin |
| Construction | Grade 50 steel, core welded |
🔄 Rock & Pole Claw Boom Length and Rated Capacity
Every boom length reduces the rated capacity of the Rock & Pole Claw. Choose the shortest boom that reaches your work.
| Boom length | Rated weight capacity | Boom mass |
|---|---|---|
| No boom | 1,000 lb | — |
| 4 ft | 800 lb | 79 lb |
| 6 ft | 600 lb | 103 lb |
| 8 ft | 500 lb | 128 lb |
Rated capacity is measured with the claw on the end of the boom. Your working limit is also bounded by your machine: maximum capacity equals the machine’s rated operating capacity minus the weight of the attachment. Never exceed the rated capacity of the attachment.
📋 Configuring Your Rock & Pole Claw
Two selections decide how far the Rock & Pole Claw reaches and how much it holds:
- Attachment Base — No Attachment Base ships the tool head alone for operators who already run an EZ Spot UR base, replacing a worn head or adding a second head to an existing base; Fixed Non-Rotating Base has no moving parts to maintain and lets the tool head be manually indexed 90 degrees for horizontal or vertical work; Double Cylinder Rotating Base adds powered 127-degree rotation to the operator’s left.
- Boom Length — No Optional Boom keeps the full 1,000 lb rating; 4' Boom Included holds 800 lb; 6' Boom Included holds 600 lb; 8' Boom Included gives the longest reach at 500 lb.
🔗 Bases and Booms That Fit the Rock & Pole Claw
The Rock & Pole Claw carries a 3" square female receiver, which is the same interface used across the EZ Spot UR range. That means the tool head fits the Fixed Non-Rotating Base and the Double Cylinder Rotating Base sold on this site, and a base bought today will still accept a different EZ Spot UR tool head bought later.
The 4, 6 and 8 foot booms are interchangeable between the Rock & Pole Claw and the Utility Claw (EZ-0005), so a boom is not stranded if you add the second claw later.
🚜 Which Machines Take This Rock Grapple?
The Rock & Pole Claw attaches to skid steer loaders and compact track loaders equipped with a Universal Quick Attach (SSQA) system, including:
BobcatCaterpillarJohn DeereCaseNew HollandTakeuchiKubotaGehl
The machine must supply 20–30 GPM at 3,000 psi through an auxiliary circuit, connected with ¾" flush-face couplings. No case drain is required. Sizing is set by your machine’s rated operating capacity: subtract the weight of the Rock & Pole Claw and any base and boom you select, and the remainder is what you can safely lift.
The Rock & Pole Claw can also be adapted to excavators, wheel loaders, telehandlers and backhoes using a specialty bolt-on mount in place of the quick attach plate.
Compatibility is determined by mount type, not brand — confirm your machine’s quick attach configuration and auxiliary hydraulic flow before ordering. Everything needed to confirm fitment is on this page — add it to your cart to check delivered pricing for your address.
Freight note: inspect the crate before signing the carrier’s Bill of Lading. Note any damage on the delivery paperwork at the time of delivery — that record is what supports a carrier claim.
❓ Rock & Pole Claw Questions, Answered
Which boom length should I order with the Rock & Pole Claw?
Match the boom to the heaviest load you handle, not the longest reach you can imagine. The Rock & Pole Claw is rated at 1,000 lb with no boom, 800 lb on the 4-foot boom, 600 lb on the 6-foot and 500 lb on the 8-foot. Reach is bought with capacity, so the shortest boom that reaches the work is the right one.
Do I need a base to use the Rock & Pole Claw?
Yes. The Rock & Pole Claw is a tool head with a 3" square female receiver and it must sit on a base. Order the No Attachment Base option only if you already own an EZ Spot UR Fixed Non-Rotating Base or Double Cylinder Rotating Base — the tool head will slide onto either and pin with the 3/4" pin.
What is the difference between the fixed base and the rotating base?
The Double Cylinder Rotating Base uses two 2.5" bore cylinders to power the tool head through 127 degrees to the operator’s left, which is what lets you set a pole upright or place a rock precisely. The Fixed Non-Rotating Base does not rotate under power, has no moving parts to maintain, and allows the tool head to be manually indexed 90 degrees so the attachment can be run horizontally or vertically.
What hydraulic flow does the Rock & Pole Claw need?
The Rock & Pole Claw runs on 20–30 GPM at 3,000 psi through a standard auxiliary circuit, connected with ¾" flush-face couplings rated to a 15 ksi burst pressure. Pressure drop through the attachment is 262 psi. A high-flow machine is not required and no case drain line is needed.
Can I move the Rock & Pole Claw between two machines?
Yes. The base attaches with a Universal Quick Attach plate, so any skid steer or compact track loader with an SSQA coupler and 20–30 GPM of auxiliary flow will run it. For excavators, wheel loaders, telehandlers and backhoes, a specialty bolt-on mount replaces the quick attach plate.
Will a boom bought for the Rock & Pole Claw fit the Utility Claw?
Yes. The 4, 6 and 8 foot booms are common to both the Rock & Pole Claw (EZ-0006) and the Utility Claw (EZ-0005), so a boom is not stranded if you add the other claw to your fleet later.
How is the Rock & Pole Claw shipped?
Shipping is calculated at checkout — add the Rock & Pole Claw to your cart, enter your delivery address, and the freight charge is displayed before you complete the order. Lift gate service is available for residential deliveries and can be selected at checkout.
What comes in the box with the Rock & Pole Claw?
The Rock & Pole Claw ships complete with hydraulic hoses, flush-faced couplers, a spring hose mount and a wiring harness. The attachment base and boom are supplied only if you select them above; if anything is unclear about your configuration, email support@eskidsteer.com or message us on chat.
📥 Rock and Pole Claw Skid Steer Attachment Downloads
Full published specifications for the Rock and Pole Claw Skid Steer Attachment, including hydraulic requirements, cylinder data and rated capacities.
Shipping
The following are estimated processing and delivery times. We make every effort to fulfill orders as quickly as possible.
We only deliver within the United States. If a package can’t be delivered due to an error entering your shipping address, Eskidsteer is not responsible for any additional fees that may incur to reroute or reship the package.
By placing an order through this Website you will be agreeing to the terms below. These are provided to ensure both parties are aware of and agree upon this arrangement to mutually protect and set expectations for our service. Please read our Terms of Service.
How do I place an order?
We do not take orders on the phone for security reasons. To place an order, go to a product page, select the desired quantity of the item, and add it to your cart via the “Add to Cart” button. During checkout, you just need to enter or confirm your shipping address and credit card information, then you can place your order
Shipping fee:
Delivery Time= Handling time +Transit Time:
Handling time: 3-3 Days
Transit time: 5-8Days
Order cut off Time: 5:00 PM (GMT-05:00) Eastern Standard Time (New York)
Which shipping carriers do you use to ship?
All Shipments are done with LTL Carriers, UPS, FedEx, DHL, and USPS
Failure to Accept Products on Delivery
If you reject delivery of goods ordered from us, or otherwise fail to accept delivery of the goods, you agree to pay for all related and additional shipping fees, duties, taxes, restocking fees and other charges arising from such failure to accept delivery. After such failure to accept delivery of the goods, it shall be your responsibility to pay for and arrange a new shipping date.
Tracking Information:
We also provide tracking numbers for all orders. Once your order has been shipped, we will provide you with a tracking number that you can use to track the progress of your package. You will receive this tracking number via email.
We understand the importance of knowing the status of your order, and we strive to provide you with transparent and reliable tracking information. If you have any questions or need assistance with tracking your order, please don’t hesitate to contact our customer support team. We’re here to help!.
Can I ship to multiple addresses?
At this time, we cannot ship to multiple addresses in one order. Please place separate orders on support@eSkidsteer.com to ship to different addresses. If you need assistance, please contact our Customer Service.
Wrong Address:
Please review and ensure that you have entered the correct address. We are not responsible for non-delivery due to errors in the address that you provide. If an order is returned due to an incorrect address, we will refund the original order (excluding the shipping fee) and ask that you re-submit your order.
Change of Address:
If your item hasn’t yet been shipped, you may change your delivery address by emailing at support@eSkidsteer.com. Please note that we are not obligated to ensure changes to the delivery address after the item has been delivered.
If you have any questions or require further assistance regarding the shipping policy, please do not hesitate to contact our customer support team.
Phone: +1 8667578337
Email: support@eSkidsteer.com
Address: 30 North Gould St Suite R, Sheridan, WY 82801, USA
Returns
Returns
We offer returns and exchanges in limited circumstances as follows:
- In order to submit a return, you must contact us by email at support@eSkidsteer.com for us to confirm the items ordered are eligible for return or exchange;
- To be eligible for a return, you must commence the return process within 30 days of your item being delivered to you and:
- it must be unused, for example, once an item is hooked up to an attachment plate, hydraulic lines or electrical connection, it will not be eligible for return. Likewise, if your item shows any sign of use, which we may determine in our sole and absolute discretion, we will not accept the return;
- it must be in the same condition you received it in. You will be required to send us timestamped photos of the condition of your items as a condition to determine your eligibility for the return or exchange; and
- it must be returned in the same packaging or containers as it was received in.
We do not accept returns for products that were listed as final sale items at the time of purchase.
You agree to pay a 25% restocking fee on all returns, which we will deduct from any refund owing to you.
After the above referenced 30-day period, unfortunately we cannot offer you a refund or exchange, under any circumstances.
If your return or exchange is approved, we will provide instructions on shipping your items back to us or the applicable supplier via email.
You agree that you shall be responsible for all return shipping costs and related expenses.
Our shipping cost to you is not refundable.
You are also responsible for ensuring the items are carefully packaged for shipment and that risk of loss or damage during return shipping shall be your sole liability. You may wish to obtain insurance while the returned items are in transit.
Lost or Damaged
If the item is damaged when you receive it, do not sign the proof of delivery, and contact us immediately at support@eSkidsteer.com. If you sign the proof of delivery form, you cannot later claim the item was lost (i.e. not delivered) or damaged on arrival.
If the item is damaged on arrival take photos of the damage with a time stamp.
In the event the item is lost or damaged on arrival, we will assist you with filing a reimbursement claim directly with the applicable supplier or shipping company as applicable. However, you agree that as we are not the direct supplier of the items, it shall be your responsibility to pursue any claims with the applicable supplier in the event your lost or damaged item is not replaced by the supplier or carrier.
No Warranties Offered by Us
Everything on the Website, including all products available for order, are provided "as is" without warranty of any kind from us, including all implied warranties and conditions of merchantability and fitness for a particular purpose. We hereby disclaim all warranties and conditions of any kind, whether express, implied or statutory.
You acknowledge that we do not manufacture the products made for sale on the Website and that such products and the individual components thereof, are made by third party manufacturers.
Warranties Offered by Third Parties
Our third party suppliers and manufacturers may offer limited warranties on certain products sold on the Website. You may contact us and we can refer you to the applicable supplier or manufacturer if you wish to inquire about the details of any such warranties offered by those third parties. You agree that we shall not be liable or responsible for any warranties granted by such third parties.
To the extent products you order from us have warranties provided by a third party supplier or manufacturer, upon your request we agree to reasonably assist with the submission of warranty claims to such third parties. However, we make no guarantees that any warranty claims will be successful. You agree it is your responsibility to ensure warranty claims are submitted within the applicable timeframe to the applicable supplier or manufacturer.
- Choosing a selection results in a full page refresh.